Spin trap determination of free radical burst kinetics in stimulated neutrophils

Electron spin resonance spin-trapping methods were used to investigate the free radical production kinetics of neutrophils stimulated with phorbol myristate acetate (PMA) and opsonized zymosan (OPZ). Using the spin trap 5,5-dimethyl-1-pyrroline-N-oxide, the principle spin adduct observed is DMPO-OH (trapped hydroxyl radical). The DMPO-OH ESR signal amplitude was observed to decay exponentially. In such cases a simple method may be used to analyze the raw kinetics amplitude data to yield true production rate and net production data. The method, pitfalls, and self-consistency criteria are illustrated with PMA and OPZ-stimulated neutrophils at 25 and 37 degrees C under varying oxygen tensions, and with noise-free simulated data. The simulations demonstrate that rate results are relatively insensitive to the precise choice of decay time constant, tc, while net production results are very sensitive to the choice of tc used to analyze the raw data. OPZ (0.6-2.4 mg/ml) yields a strong, sharp neutrophil burst which peaks in 2 min or less while PMA yields a slower burst which peaks in 3.4-14 min for PMA concentrations of 500-50 ng/ml, respectively. Increased oxygen tension during the PMA experiments increased the spin adduct lifetime. The methods presented are applicable to other cell systems or spin adducts which exhibit first order decay.     

Glycerol permeability of human spermatozoa and its activation energy

Glycerol has commonly been employed as a cryoprotectant in cryopreservation of human spermatozoa. However, the addition of glycerol into the sperm before freezing and the removal of glycerol from the sperm after freezing and thawing result in anisotonic environments to the cells, which can cause cell injury. To define optimal procedures for the addition/removal of glycerol and to minimize the cell injury, one needs to know the kinetics of glycerol permeation across the sperm plasma membrane at different temperatures. For this, one has to determine the permeability coefficient of glycerol (Pg) and its activation energy (Ea). Values of Pg at different temperatures and at different glycerol concentrations were determined by measuring the time required for 50% spermolysis in hyperosmotic glycerol solutions which were hypotonic with respect to electrolytes. Value of the Ea was determined assuming an Arrhenius type temperature dependence of Pg. A dual fluorescent staining technique (propidium iodide and 6-carboxyfluoroscein diacetate) and flow cytometry were used to measure the spermolysis. The values of Pg in 0.5, 1.0, 1.5, and 2.0 M glycerol at 22 degrees C are 1.62, 1.88, 1.68, and 1.54 x 10(-3) cm/min, respectively. The values of Pg in 1 M glycerol at 0, 8, 22, and 30 degrees C are 0.33, 0.54, 1.88, and 2.60 x 10(-3) cm/min, respectively. The value of Ea is 11.76 kcal/mol.     

Dog Eat Dog: Neo-imperialism in Kim Ki-duk's Address Unknown

Kim Ki-duk's 2001 film Address Unknown presents a political allegory of modern Korea by referencing past traumas through local characters set in a U.S. military base town in 1970. The physical and emotional scars of past violence reveal current victimization re-enacting social injustice. Cold War militarism and the U.S. presence shatter the lives of three young people and the community as they internalize the destruction of their lives.     

Intracellular ice formation in mouse oocytes subjected to interrupted rapid cooling

The formation of ice crystals within cells (IIF) is lethal. The classical approach to avoiding it is to cool cells slowly enough so that nearly all their supercooled freezable water leaves the cell osmotically before they have cooled to a temperature that permits IIF. An alternative approach is to cool the cell rapidly to just above its ice nucleation temperature, and hold it there long enough to permit dehydration. Then, the cell is cooled rapidly to -70 degrees C or below. This approach, often called interrupted rapid cooling, is the subject of this paper. Mouse oocytes were suspended in 1.5M ethylene glycol (EG)/PBS, rapidly cooled (50 degrees C/min) to -25 degrees C and held for 5, 10, 20, 30, or 40 min before being rapidly cooled (50 degrees C/min) to -70 degrees C. In cells held for 5 min, IIF (flashing) occurred abruptly during the second rapid cool. As the holding period was increased to 10 and 20 min, fewer cells flashed during the cooling and more turned black during warming. Finally, when the oocytes were held 30 or 40 min, relatively few flashed during either cooling or warming. Immediately upon thawing, these oocytes were highly shrunken and crenated. However, upon warming to 20 degrees C, they regained most of their normal volume, shape, and appearance. These oocytes have intact cell membranes, and we refer to them as survivors. We conclude that 30 min at -25 degrees C removes nearly all intracellular freezable water, the consequence of which is that IIF occurs neither during the subsequent rapid cooling to -70 degrees C nor during warming.     

Bioreactors in tissue engineering—principles,applications and commercial constraints

Bioreactor technology is vital for tissue engineering. Usually, bioreactors are used to provide a tissue-specific physiological in vitro environment during tissue maturation. In addition to this most obvious application, bioreactors have the potential to improve the efficiency of the overall tissue-engineering concept. To date, a variety of bioreactor systems for tissue-specific applications have been developed. Of these, some systems are already commercially available. With bioreactor technology, various functional tissues of different types were generated and cultured in vitro. Nevertheless, these efforts and achievements alone have not yet led to many clinically successful tissue-engineered implants. We review possible applications for bioreactor systems within a tissue-engineering process and present basic principles and requirements for bioreactor development. Moreover, the use of bioreactor systems for the expansion of clinically relevant cell types is addressed. In contrast to cell expansion, for the generation of functional three-dimensional tissue equivalents, additional physical cues must be provided. Therefore, bioreactors for musculoskeletal tissue engineering are discussed. Finally, bioreactor technology is reviewed in the context of commercial constraints.     

Measurement of the water permeability of the membranes of boar, ram, and rabbit spermatozoa using concentration-dependent self-quenching of an entrapped fluorophore

Published values for sperm membrane water permeability (L(p)) obtained using a time-to-lysis methodology have produced anomalous results when used to model optimal cooling rates for cryopreservation of spermatozoa. As the lysis method is dependent on potentially questionable assumptions, we describe an alternative method for measuring sperm L(p). Spermatozoa were exposed to hypo- and hyperosmotic conditions using a stopped-flow apparatus and the time course of resulting volume changes was measured using concentration-dependent self-quenching of the entrapped fluorophore, carboxyfluorescein (CF). L(p) was measured for boar, rabbit, and ram spermatozoa using a range of osmotic stresses (+/-50-100 mOsm). Values for exosmotic and endosmotic flow showed no evidence of rectification. Mean L(p) values were 0.84 microm/min/atm (boar), 0.28 microm/min/atm (rabbit), and 2.79 microm/min/atm (ram). These values are lower than the lysis method estimates, with the ram value reduced by approximately two-thirds using the current methodology. The value for boar spermatozoa showed good agreement with published values obtained using an electronic cell-sizing technique. Substitution of the revised values for L(p) into the model for optimal cooling rates brings the calculated optimal rate closer to the lower empirically observed value but does not fully account for the previously reported discrepancies.