Is it possible to manipulate root anchorage in young trees?

The optimal root system architecture for increased tree anchorage has not yet been determined and in particular, the role of the tap root remains elusive. In Maritime pine (Pinus pinaster Ait.), tap roots may play an important role in anchoring young trees, but in adult trees, their growth is often impeded by the presence of a hard pan layer in the soil and the tap root becomes a minor component of tree anchorage. To understand better the role of the tap root in young trees, we grew cuttings (no tap root present) and seedlings where the tap root had (?) or had not (+) been pruned, in the field for 7 years. The force (F) necessary to deflect the stem sideways was then measured and divided by stem cross-sectional area (CSA), giving a parameter analogous to stress during bending. Root systems were extracted and root architecture and wood mechanical properties (density and longitudinal modulus of elasticity, E _L ) determined. In seedlings (?) tap roots, new roots had regenerated where the tap root had been pruned, whereas in cuttings, one or two lateral roots had grown downwards and acted as tap roots. Cuttings had significantly less lateral roots than the other treatments, but those near the soil surface were 14% and 23% thicker than plants (+) and (?) tap roots, respectively. Cuttings were smaller than seedlings, but were not relatively less resistant to stem deflection, probably because the thicker lateral roots compensated for their lower number. Apart from stem volume which was greater in trees (+) tap roots, no significant differences with regard to size or any root system variable were found in plants (?) or (+) tap roots. In all treatments, lateral roots were structurally reinforced through extra growth along the direction of the prevailing wind, which also improved tap root anchorage. Predictors of log F/CSA differed depending on treatment: in trees (?) tap roots, a combination of the predictors stem taper and %volume allocated to deep roots was highly regressed with log F/CSA (R ² = 0.83), unlike plants (+) tap roots where the combined predictors of lateral root number and root depth were best regressed with log F/CSA (R ² = 0.80). In cuttings, no clear relationships between log F/CSA and any parameter could be found. Wood density and E _L did not differ between roots, but did diminish with increasing distance from the stem in lateral roots. E _L was significantly lower in lateral roots from cuttings. Results showed that nursery techniques influence plant development but that the architectural pattern of Maritime pine root systems is stable, developing a sinker root system even when grown from cuttings. Anchorage is affected but the consequences for the long-term are still not known. Numerical modelling may be the only viable method to investigate the function that each root plays in adult tree anchorage.     

Phenotypic analysis of pneumococcal polysaccharide-specific B cells

The phenotype of B cells responsible for the production of anti-pneumococcal polysaccharide Ab has been unclear. Although individuals that respond poorly to the 23-valent pneumococcal polysaccharide (PPS) vaccine, Pneumovax, such as children <2 y, the asplenic, and a subset of common variable immunodeficiency patients, are profoundly deficient or lack IgM memory cells (CD27(+)IgM(+)), they are also deficient in the switched memory (CD27(+)IgM(-)) compartment. Direct characterization of PPS-specific B cells has not been performed. In this study, we labeled PPS14 and PPS23F with fluorescent markers. Fluorescently labeled PPS were used in FACSAria flow cytometry to characterize the phenotype of PPS-specific B cells obtained from 18 young adults pre- and postimmunization with Pneumovax. The labeled PPS were capable of inhibiting binding of Ab to the native PPS. Similarly, the native PPS were able to inhibit binding of PPS-specific B cells in a flow cytometric assay demonstrating specificity and functionality. Phenotypic analysis of unselected B cells, pre- and postimmunization, demonstrated a predominance of naive CD27(-)IgM(+) cells accounting for 61.5% of B cells. Likewise, the PPS-specific B cells obtained preimmunization consisted primarily of naive, CD27(-) B cells, 55.4-63.8%. In contrast, the PPS-specific B cells obtained postimmunization were predominantly IgM memory cells displaying the CD27(+)IgM(+), 54.2% for PPS14 and 66% for PPS23F, significantly higher than both unselected B cells and PPS-specific B cells. There was no significant difference in switched memory B cell populations (CD27(+)IgM(-)) between groups. These results suggest a dominant role of IgM memory cells in the immune response to pneumococcal polysaccharides.     

Metal accumulation in two contiguous eutrophic peri-urban lakes,Chivero and Manyame,Zimbabwe

Concentrations of aluminium, cadmium, chromium, cobalt, copper, iron, lead, nickel and zinc were determined in surface water, benthic sediments, and the gills, liver and stomach muscle tissues of Oreochromis niloticus and Clarias gariepinus in peri-urban lakes Chivero and Manyame, Zimbabwe. Five sites were sampled in each lake once per month in November 2015, February, May, August and November 2016. Pollution load index detected no metal contamination, whereas the geo-accumulation index reflected heavy to extreme sediment pollution, with Fe, Cd, Zn, Cr, Ni and Cu present in both lakes. Significant spatial temporal variations were detected for Al, Cr, Cu and Pb across sites within and between the two lakes. High Fe, Al and Cr concentrations in water and sediments in lakes Chivero and Manyame derive from geogenic background sources in addition to anthropogenic loads and intensity. Elevated concentrations of Al, Pb, Cu, Cd, Fe and Zn detected in gills, liver and stomach tissue of catfish corroborate concentrations in water and sediments, and pose the highest ecological and health risk for hydrobionts in lakes Chivero and Manyame. Contiguity of peri-urban lakes exposes them to similar threats, necessitating creative water management strategies, which ensure ecological continuity.     

Preparation and characterization of cockle shell aragonite nanocomposite porous 3D scaffolds for bone repair

The demands for applicable tissue-engineered scaffolds that can be used to repair load-bearing segmental bone defects (SBDs) is vital and in increasing demand. In this study, seven different combinations of 3 dimensional (3D) novel nanocomposite porous structured scaffolds were fabricated to rebuild SBDs using an extraordinary blend of cockle shells (CaCo₃) nanoparticles (CCN), gelatin, dextran and dextrin to structure an ideal bone scaffold with adequate degradation rate using the Freeze Drying Method (FDM) and labeled as 5211, 5400, 6211, 6300, 7101, 7200 and 8100. The micron sized cockle shells powder obtained (75 µm) was made into nanoparticles using mechano-chemical, top-down method of nanoparticles synthesis with the presence of the surfactant BS-12 (dodecyl dimethyl bataine). The phase purity and crystallographic structures, the chemical functionality and the thermal characterization of the scaffolds’ powder were recognized using X-Ray Diffractometer (XRD), Fourier transform infrared (FTIR) spectrophotometer and Differential Scanning Calorimetry (DSC) respectively. Characterizations of the scaffolds were assessed by Scanning Electron Microscopy (SEM), Degradation Manner, Water Absorption Test, Swelling Test, Mechanical Test and Porosity Test. Top-down method produced cockle shell nanoparticles having averagely range 37.8±3–55.2±9 nm in size, which were determined using Transmission Electron Microscope (TEM). A mainly aragonite form of calcium carbonate was identified in both XRD and FTIR for all scaffolds, while the melting (Tm) and transition (Tg) temperatures were identified using DSC with the range of Tm 62.4–75.5 °C and of Tg 230.6–232.5 °C. The newly prepared scaffolds were with the following characteristics: (i) good biocompatibility and biodegradability, (ii) appropriate surface chemistry and (iii) highly porous, with interconnected pore network. Engineering analyses showed that scaffold 5211 possessed 3D interconnected homogenous porous structure with a porosity of about 49%, pore sizes ranging from 8.97 to 337 µm, mechanical strength 20.3 MPa, Young's Modulus 271±63 MPa and enzymatic degradation rate 22.7 within 14 days.     

The antidepressant-like effect of Ocimum basilicum in an animal model of depression

We investigated the efficacy of Ocimum basilicum (OB) essential oils for treating depression related behavioral, biochemical and histopathological changes caused by exposure to chronic unpredictable mild stress (CUMS) in mice and to explore the mechanism underlying the pathology. Male albino mice were divided into four groups: controls; CUMS; CUMS plus fluoxetine, the antidepressant administered for pharmacological validation of OB; and CUMS plus OB. Behavioral tests included the forced swim test (FST), elevated plus-maze (EPM) and the open ?eld test (OFT); these tests were performed at the end of the experiment. We assessed serum corticosterone level, protein, gene and immunoexpression of brain-derived neurotropic factor (BDNF) and glucocorticoid receptors (GRs) as well as immunoexpression of glial fibrillary acidic protein (GFAP), Ki67, caspase-3 in the hippocampus. CUMS caused depression in the mice as evidenced by prolonged immobility in the FST, prolonged time spent in the open arms during the EPM test and reduction of open field activity in the OFT. OB ameliorated the CUMS induced depressive status. OB significantly reduced the corticosterone level and up-regulated protein and gene expressions of BDNF and GR. OB reduced CUMS induced hippocampal neuron atrophy and apoptosis, and increased the number of the astrocytes and new nerve cells. OB significantly increased GFAP-positive cells as well as BDNF and GR immunoexpression in the hippocampus.     

Preparation of soybean seed samples for FT-IR microspectroscopy

Typical preparation of seed samples for infrared (IR) microspectroscopy involves imbibition of the seed for varying time periods followed by cryosectioning. Imbibition, however, may initiate germination even at 4° C with associated changes in the chemistry of the sample. We have found that it is possible to section seeds that are sufficiently hard, such as soybeans, on a standard laboratory microtome without imbibition. The use of dry sectioning of unimbibed seeds is reported here, as well as a comparison of different mounting media and modes of analysis. Glycerol, Tissue-Tek, and ethanol were used as mounting media, and the quality of the resulting spectra was assessed. Ethanol was the preferred mountant, because it dried quickly with no residue and thus did not interfere with the spectrum of interest. Analysis in transmission mode using barium fluoride windows to hold the samples was compared with transmission-reflection analysis with sections mounted on special infrared-reflecting slides. The two modes of analysis performed well in different regions of the spectrum. The mode of analysis (transmission vs. transmission-reflection) should be based on the components of greatest interest in the sample.