Synthesis of Nitrogen Oxides in a Subthreshold Microwave Discharge in Air and in Air Mixtures with Methane

Plasma Physics Reports - A subthreshold discharge excited by a microwave beam in air at pressures close to atmospheric is studied as a plasmachemical method of nitrogen oxide (NOx) production. It...     

Study of plasma confinement in the L-2M stellarator during the formation of an edge transport barrier

A plasma confinement mode characterized by the formation of an edge transport barrier (ETB) was discovered in the L-2M stellarator after boronization of the vacuum vessel wall. The transition into this mode is accompanied by a jump in the electron temperature by 100–200 eV at the plasma edge and a sharp increase in the gradient of the electron temperature T _e in this region. The threshold power for the transition into the ETB confinement mode with an increased electron temperature gradient is P _thr ^?Te = (60 ± 15)n _e [10¹⁹ m^?3] kW. The formation of the ETB manifests itself also in a substantial change in the electron density profile. A density peak with a steep gradient at the outer side forms at the plasma edge. The threshold power for the transition into the ETB confinement mode corresponding to a substantial increase in the plasma density gradient near r = a is P _thr ^?Te = (67 ± 9)n _e [10¹⁹ m^?3] kW, which agrees to within experimental error with the threshold power for the transition into the ETB confinement mode determined from the sharp increase in the gradient of the electron temperature T _e . The value of P _thr for the L-2M stellarator agrees to within 25% with that obtained from the tokamak scaling. In the ETB confinement mode, the plasma energy W and the energy confinement time τ _E determined from diamagnetic measurements increase by 20–30% as compared to those obtained from the stellarator scaling for the confinement mode without an ETB. When the heating power increases by a factor of 2–3 above the threshold value, the effects related to improved energy confinement disappear.     

Toroidal inhomogeneity of plasma density fluctuations during ECR plasma heating in the L-2M stellarator

Correlation between short-wavelength (k_⊥ ≈ 20–30 cm^–1) and long-wavelength (k_⊥ ≈ 1–2 cm^–1) plasma density fluctuations in two poloidal cross sections of the stellarator chamber separated by 1/14 or 5/14 of the torus perimeter was studied using collective scattering of radiation of two 75-GHz gyrotrons and radiation of a 37-GHz Doppler reflectometer at an ECR heating power density of 1.6–3.2 MW/m³. It is found that excitation of turbulent fluctuations is bursty in character and that fluctuations excited in different L-2M cross sections are uncorrelated. It is shown that the energy of turbulent fluctuations is modulated by a low frequency of 5–20 kHz. An idea is put forward that anomalous transport is toroidally inhomogeneous.     

A Subthreshold High-Pressure Discharge Excited by a Microwave Beam: Physical Basics and Applications

A new form of discharge excited by a microwave beam in a high-pressure (up to atmospheric and higher) gas in free space and in a closed chamber is discussed. For the first time, the discharge was implemented by means of a gyrotron with a pulse power of 200 ≤ P ≤ 600 kW, a pulse duration of 0.5 ≤ τ ≤ 20 ms, and a wavelength of λ = 0.4 cm. Under deeply subthreshold conditions in atmospheric-pressure air, a plasma column with a length of L = 50 cm was generated by a microwave beam formed with the help of a quasi-optical transmission line. With the use of the MIG-3 gyrotron complex with the above parameters, generation of a plasma column with a length of several meters is possible in principle. The parameters and structure of the formation of the plasma investigated make it possible to class it as a self-non-self-sustained (SNSS) discharge, discovered and described for the first time at the Prokhorov General Physics Institute, Russian Academy of Sciences. One of the important applications of this type of discharge is plasmachemical cleaning of the urban air environment of hazardous contaminants.     

Reflection and backscattering of microwaves under doubling of the plasma density and displacement of the gyroresonance region during electron cyclotron resonance heating of plasma in the l-2M stellarator

Reflection and backscattering of high-power (400 kW) gyrotron radiation creating and heating plasma at the second harmonic of the electronic cyclotron frequency in the L-2M stellarator have been investigated experimentally. The effect of the displacement of the gyroresonance region from the axis of the plasma column under doubling of the plasma density on the processes of reflection and backscattering of microwave radiation has been examined. A near doubling of short-wavelength (k _⊥ ≈ 30 cm^–1) turbulent density fluctuations squared is observed. The change in the energy confinement time under variations of plasma parameters and characteristics of short-wavelength turbulence is discussed. A discrepancy between the measured values of the reflection coefficient from the electron cyclotron resonance heating region and predictions of the one-dimensional model is revealed.     

Energy Loss and Microturbulence under Multipulse ECR Plasma Heating at the L-2M Stellarator

Plasma Physics Reports - In experiments on multipulse on-axis electron cyclotron resonance heating (ECRH) of plasma by a series of microwave pulses at the L-2M stellarator, several phases of plasma...     

Application of microwave discharge for the synthesis of TiB2 and BN nano- and microcrystals in a mixture of Ti-B powders in a nitrogen atmosphere

Synthesis of titanium diboride and boron nitride nano- and microcrystals by means of a pulsed microwave discharge in a mixture of Ti-B powders in a nitrogen atmosphere is considered. For this purpose, a new type of reactor with a free surface of the powder mixture was used. The reactor design permits free expansion of the reaction products into the reactor volume and their deposition on the reactor walls. Conditions for the synthesis of TiB₂ and BN compounds were studied as functions of the energy input in the discharge, the powder component ratio, the rate of the nitrogen flow through the reactor, and the structure and phase composition of the compounds deposited on the reactor walls. The synthesis of boron nitride and titanium diboride in crystal structures is proven. An important role in the process of synthesis is played by the heating of the mixture due to the titanium diboride synthesis reaction, its behavior in the bulk of the reactor, and the titanium concentration in the powder mixture. It is also found that, as the number of discharges in the bulk of the reactor increases, a dust cloud forms. The luminescence of this cloud indicates that the initiated discharge proceeds not only on the powder surface and in the powder bulk, but also in the reactor volume.     

Plasmoid Generation behind the Front of a Subthreshold Discharge in Air under the Self-Action of a Microwave Beam

Plasma Physics Reports - Frames of a subthreshold microwave SNSS discharge were obtained in experiments. They showed that, behind the front of the head plasmoid with a fine-cell glow structure,...     

Characteristics of a Subthreshold Microwave Discharge in a Wave Beam in Air and the Efficiency of the Plasma-Chemical Reactor

Plasma Physics Reports - An analysis of a set of experiments on studying subthreshold microwave self/non-self-sustained (SNSS) discharges made it possible to estimate the volume of the active zone...     

Time–Space Evolution of the Parameters of Turbulent Density Fluctuations During Pulsed EC Heating of the Plasma at the L-2M Stellarator

Plasma Physics Reports - The study is continued of the temporal changes of the parameters of turbulent plasma density fluctuations during multi-pulse electron cyclotron (EC) heating of the plasma...