Microbial treatment of a styrene-contaminated air stream in a biofilter with high elimination capacities

A styrene-utilizing mixed microbial culture was isolated and utilized in a biofilter for the biological treatment of a contaminated air stream. Biofilter media consisted of composted wood bark and yard waste. The biofilters were acclimated at 120 s residence time and further evaluated at 60 and 30 s gas residence times. The biofilters received organic loading rates of up to 350 g/m³ h. The styrene volumetric removal rate was a function of the organic loading rate and increased with increasing loading rates. Average volumetric removal rates of 69–118 g/m³ h observed in our studies were higher than reported values for styrene biofilters. Average styrene removal efficiencies ranged from 65% to 75% (maximum 100%). Axial analysis of styrene concentration along the column indicated that the bulk of the styrene removal occurred in the first section of the biofilter. Analyses of the media indicated that the moisture content of the first section (50–55% w/w) was significantly lower than in the second and third sections (65–70% w/w). The pressure drops across the biofilter were low due to the high concentration of large media particles. The total pressure drops were 1–3, 4–6, and 10–16 mm for the 120-, 60-, and 30-s residence time periods, respectively. Journal of Industrial Microbiology & Biotechnology (2001) 26, 196–202. Received 04 March 2000/ Accepted in revised form 25 January 2001     

Biodegradation of dimethyl phthalate with high removal rates in a packed-bed reactor

Biological treatment of a dimethyl phthalate (DMP)-containing waste stream was evaluated in packed-bed bioreactors using an acclimated mixed bacterial culture. The passive immobilization start-up strategy was successful in the development of a stable biofilm on the packing material in the reactor. Nutrient supplementation significantly improved the removal efficiency. High removal rates with 100% efficiencies of DMP removal were achieved up to the phthalate-loading rate of 560 g/m³ h.