Is pyrophosphate an analog of adenosine diphosphate for beef heart mitochondrial F1-ATPase

Beef heart mitochondrial F1 possesses three pyrophosphate-binding sites, which comprises one high affinity binding site (Kd approximately equal to 1 microM) and two lower affinity sites (Kd approximately equal to 20 microM). High affinity pyrophosphate binding required the presence of Mg2+ in the incubation medium. Pyrophosphate competed with ADP, but not with Pi for binding to mitochondrial F1. Upon binding of 3 mol of pyrophosphate/mol of F1, one of the three tightly bound nucleotides present in native F1 was released. Like ADP and in contrast to Pi, pyrophosphate enhanced the fluorescence intensity of F1-bound aurovertin, and it prevented the photolabeling of F1 by 2-azido-ADP. As aurovertin and 2-azido-ADP are ligands of the beta subunit of F1, it is likely that pyrophosphate binds preferentially to the beta subunit. Whereas the binding affinity of F1 for Pi was increased by concentrations of pyrophosphate lower than 100 microM, it was decreased by a higher concentration of pyrophosphate. This biphasic effect of pyrophosphate on Pi binding was not observed with ADP, which, at all concentrations tested, inhibited Pi binding. Except for the effect of pyrophosphate on Pi binding to F1, for all the other effects, pyrophosphate mimicked ADP. It is suggested that pyrophosphate and ADP share the same binding site on F1 and that pyrophosphate interacts with the same amino acid residues as those interacting with the alpha and beta phosphate groups of ADP.     

Synthesis and properties of azidonitrophenyl pyrophosphate, a photoaffinity probe of the nucleotide binding sites of mitochondrial F1-ATPase

4-Azido-2-nitrophenyl pyrophosphate (azido-PPi) labeled with 32P in the alpha position was prepared and used to photolabel beef heart mitochondrial F1. Azido-PPi was hydrolyzed by yeast inorganic pyrophosphatase, but not by mitochondrial F1-ATPase. Incubation of F1 with [alpha-32P]azido-PPi in the dark under conditions of saturation resulted in the binding of the photoprobe to three sites, two of which exhibited a high affinity (Kd = 2 microM), the third one having a lower affinity (Kd = 300 microM). Mg2+ was required for binding. As with PPi [Issartel et al. (1987) J. Biol. Chem. 262, 13538-13544], the binding of 3 mol of azido-PPi/mol of F1 resulted in the release of one tightly bound nucleotide. ADP, AMP-PNP, and PPi competed with azido-PPi for binding to F1, but Pi and the phosphate analogue azidonitrophenyl phosphate did not. The binding of [32P]Pi to F1 was enhanced at low concentrations of azido-PPi, as it was in the presence of low concentrations of PPi. Sulfite, which is thought to bind to an anion-binding site on F1, inhibited competitively the binding of both ADP and azido-PPi, suggesting that the postulated anion-binding site of F1 is related to the exchangeable nucleotide-binding sites. Upon photoirradiation of F1 in the presence of [alpha-32P]azido-PPi, the photoprobe became covalently bound with concomitant inactivation of F1. The plots relating the inactivation of F1 to the covalent binding of the probe were rectilinear up to 50% inactivation.(ABSTRACT TRUNCATED AT 250 WORDS)     

Phylogenetic diversification of immunoglobulin genes and the antibody repertoire

Immunoglobulins are encoded by a large multigene system that undergoes somatic rearrangement and additional genetic change during the development of immunoglobulin-producing cells. Inducible antibody and antibody-like responses are found in all vertebrates. However, immunoglobulin possessing disulfide-bonded heavy and light chains and domain-type organization has been described only in representatives of the jawed vertebrates. High degrees of nucleotide and predicted amino acid sequence identity are evident when the segmental elements that constitute the immunoglobulin gene loci in phylogenetically divergent vertebrates are compared. However, the organization of gene loci and the manner in which the independent elements recombine (and diversify) vary markedly among different taxa. One striking pattern of gene organization is the "cluster type" that appears to be restricted to the chondrichthyes (cartilaginous fishes) and limits segmental rearrangement to closely linked elements. This type of gene organization is associated with both heavy- and light-chain gene loci. In some cases, the clusters are "joined" or "partially joined" in the germ line, in effect predetermining or partially predetermining, respectively, the encoded specificities (the assumption being that these are expressed) of the individual loci. By relating the sequences of transcribed gene products to their respective germ-line genes, it is evident that, in some cases, joined-type genes are expressed. This raises a question about the existence and/or nature of allelic exclusion in these species. The extensive variation in gene organization found throughout the vertebrate species may relate directly to the role of intersegmental (V<==>D<==>J) distances in the commitment of the individual antibody-producing cell to a particular genetic specificity. Thus, the evolution of this locus, perhaps more so than that of others, may reflect the interrelationships between genetic organization and function.      

What can we learn from noncoding regions of similarity between genomes?

Background  

In addition to known protein-coding genes, large amounts of apparently non-coding sequence are conserved between the human and mouse genomes. It seems reasonable to assume that these conserved regions are more likely to contain functional elements than less-conserved portions of the genome.     

An interlaboratory comparison of physiological and genetic properties of four Saccharomyces cerevisiae strains

To select a Saccharomyces cerevisiae reference strain amenable to experimental techniques used in (molecular) genetic, physiological and biochemical engineering research, a variety of properties were studied in four diploid, prototrophic laboratory strains. The following parameters were investigated: 1) maximum specific growth rate in shake-flask cultures; 2) biomass yields on glucose during growth on defined media in batch cultures and steady-state chemostat cultures under controlled conditions with respect to pH and dissolved oxygen concentration; 3) the critical specific growth rate above which aerobic fermentation becomes apparent in glucose-limited accelerostat cultures; 4) sporulation and mating efficiency; and 5) transformation efficiency via the lithium-acetate, bicine, and electroporation methods. On the basis of physiological as well as genetic properties, strains from the CEN.PK family were selected as a platform for cell-factory research on the stoichiometry and kinetics of growth and product formation.     

Adaptation of acidogenic sludge to increasing glycerol concentrations for biohydrogen production

Hydrogen is a promising alternative as an energetic carrier and its production by dark fermentation from wastewater has been recently proposed, with special attention to crude glycerol as potential substrate. In this study, two different feeding strategies were evaluated for replacing the glucose substrate by glycerol substrate: a one-step strategy (glucose was replaced abruptly by glycerol) and a step-by-step strategy (progressive decrease of glucose concentration and increase of glycerol concentration from 0 to 5 g L^?1), in a continuous stirred tank reactor (12 h of hydraulic retention time (HRT), pH 5.5, 35 °C). While the one-step strategy led to biomass washout and unsuccessful H₂ production, the step-by-step strategy was efficient for biomass adaptation, reaching acceptable hydrogen yields (0.4?±?0.1 mol_H2?mol^?1 _{glycerol consumed}) around 33 % of the theoretical yield independently of the glycerol concentration. Microbial community structure was investigated by single-strand conformation polymorphism (SSCP) and denaturing gradient gel electrophoresis (DGGE) fingerprinting techniques, targeting either the total community (16S ribosomal RNA (rRNA) gene) or the functional Clostridium population involved in H₂ production (hydA gene), as well as by 454 pyrosequencing of the total community. Multivariate analysis of fingerprinting and pyrosequencing results revealed the influence of the feeding strategy on the bacterial community structure and suggested the progressive structural adaptation of the community to increasing glycerol concentrations, through the emergence and selection of specific species, highly correlated to environmental parameters. Particularly, this work highlighted an interesting shift of dominant community members (putatively responsible of hydrogen production in the continuous stirred tank reactor (CSTR)) according to the gradient of glycerol proportion in the feed, from the family Veillonellaceae to the genera Prevotella and Clostridium sp., putatively responsible of hydrogen production in the CSTR.     

Isolation and characterization of novel bacterial strains exhibiting ligninolytic potential

Background

The number of biotransformations that use nicotinamide recycling systems is exponentially growing. For this reason one of the current challenges in biocatalysis is to develop and optimize more simple and efficient cofactor recycling systems. One promising approach to regenerate NAD⁺ pools is the use of NADH-oxidases that reduce oxygen to hydrogen peroxide while oxidizing NADH to NAD⁺. This class of enzymes may be applied to asymmetric reduction of prochiral substrates in order to obtain enantiopure compounds.

Results

The NADH-oxidase (NOX) presented here is a flavoenzyme which needs exogenous FAD or FMN to reach its maximum velocity. Interestingly, this enzyme is 6-fold hyperactivated by incubation at high temperatures (80°C) under limiting concentrations of flavin cofactor, a change that remains stable even at low temperatures (37°C). The hyperactivated form presented a high specific activity (37.5 U/mg) at low temperatures despite isolation from a thermophile source. Immobilization of NOX onto agarose activated with glyoxyl groups yielded the most stable enzyme preparation (6-fold more stable than the hyperactivated soluble enzyme). The immobilized derivative was able to be reactivated under physiological conditions after inactivation by high solvent concentrations. The inactivation/reactivation cycle could be repeated at least three times, recovering full NOX activity in all cases after the reactivation step. This immobilized catalyst is presented as a recycling partner for a thermophile alcohol dehydrogenase in order to perform the kinetic resolution secondary alcohols.

Conclusion

We have designed, developed and characterized a heterogeneous and robust biocatalyst which has been used as recycling partner in the kinetic resolution of rac-1-phenylethanol. The high stability along with its capability to be reactivated makes this biocatalyst highly re-useable for cofactor recycling in redox biotransformations.