Burn‐in Free Nonfullerene‐Based Organic Solar Cells

Organic solar cells that are free of burn‐in, the commonly observed rapid performance loss under light, are presented. The solar cells are based on poly(3‐hexylthiophene) (P3HT) with varying molecular weights and a nonfullerene acceptor (rhodanine‐benzothiadiazole‐coupled indacenodithiophene, IDTBR) and are fabricated in air. P3HT:IDTBR solar cells light‐soaked over the course of 2000 h lose about 5% of power conversion efficiency (PCE), in stark contrast to [6,6]‐Phenyl C61 butyric acid methyl ester (PCBM)‐based solar cells whose PCE shows a burn‐in that extends over several hundreds of hours and levels off at a loss of ≈34%. Replacing PCBM with IDTBR prevents short‐circuit current losses due to fullerene dimerization and inhibits disorder‐induced open‐circuit voltage losses, indicating a very robust device operation that is insensitive to defect states. Small losses in fill factor over time are proposed to originate from polymer or interface defects. Finally, the combination of enhanced efficiency and stability in P3HT:IDTBR increases the lifetime energy yield by more than a factor of 10 when compared with the same type of devices using a fullerene‐based acceptor instead.     

Spontaneous activity of the mitochondrial apoptosis pathway drives chromosomal defects,the appearance of micronuclei and cancer metastasis through the Caspase-Activated DNAse

Micronuclei are DNA-containing structures separate from the nucleus found in cancer cells. Micronuclei are recognized by the immune sensor axis cGAS/STING, driving cancer metastasis. The mitochondrial apoptosis apparatus can be experimentally triggered to a non-apoptotic level, and this can drive the appearance of micronuclei through the Caspase-activated DNAse (CAD). We tested whether spontaneously appearing micronuclei in cancer cells are linked to sub-lethal apoptotic signals. Inhibition of mitochondrial apoptosis or of CAD reduced the number of micronuclei in tumor cell lines as well as the number of chromosomal misalignments in tumor cells and intestinal organoids. Blockade of mitochondrial apoptosis or deletion of CAD reduced, while experimental activation CAD, STING-dependently, enhanced aggressive growth of tumor cells in vitro. Deletion of CAD from human cancer cells reduced metastasis in xenograft models. CAD-deficient cells displayed a substantially altered gene-expression profile, and a CAD-associated gene expression ‘signature’ strongly predicted survival in cancer patients. Thus, low-level activity in the mitochondrial apoptosis apparatus operates through CAD-dependent gene-induction and STING-activation and has substantial impact on metastasis in cancer.Subject terms: Metastasis, Apoptosis     

Calix[4]arene methylenebisphosphonic acids as inhibitors of fibrin polymerization

Calix[4]arenes bearing two or four methylenebisphosphonic acid groups at the macrocyclic upper rim have been studied with respect to their effects on fibrin polymerization. The most potent inhibitor proved to be calix[4]arene tetrakis-methylene-bis-phosphonic acid (C-192), in which case the maximum rate of fibrin polymerization in the fibrinogen + thrombin reaction decreased by 50% at concentrations of 0.52 × 10(-6) M (IC(50)). At this concentration, the molar ratio of the compound to fibrinogen was 1.7 : 1. For the case of desAABB fibrin polymerization, the IC(50) was 1.26 × 10(-6) M at a molar ratio of C-192 to fibrin monomer of 4 : 1. Dipropoxycalix[4]arene bis-methylene-bis-phosphonic acid (C-98) inhibited fibrin desAABB polymerization with an IC(50) = 1.31 × 10(-4) M. We hypothesized that C-192 blocks fibrin formation by combining with polymerization site 'A' (Aα17-19), which ordinarily initiates protofibril formation in a 'knob-hole' manner. This suggestion was confirmed by an HPLC assay, which showed a host-guest inclusion complex of C-192 with the synthetic peptide Gly-Pro-Arg-Pro, an analogue of site 'A'. Further confirmation that the inhibitor was acting at the initial step of the reaction was obtained by electron microscopy, with no evidence of protofibril formation being evident. Calixarene C-192 also doubled both the prothrombin time and the activated partial thromboplastin time in normal human blood plasma at concentrations of 7.13 × 10(-5) M and 1.10 × 10(-5) M, respectively. These experiments demonstrate that C-192 is a specific inhibitor of fibrin polymerization and blood coagulation and can be used for the design of a new class of antithrombotic agents.     

Exploring the Stability of Novel Wide Bandgap Perovskites by a Robot Based High Throughput Approach

Currently, lead‐based perovskites with mixed multiple cations and hybrid halides are attracting intense research interests due to their promising stability and high efficiency. A tremendous amount of 3D and 2D perovskite compositions and configurations are causing a strong demand for high throughput synthesis and characterization. Furthermore, wide bandgap (≈1.75 eV) perovskites as promising top‐cell materials for perovskite–silicon tandem configurations require the screening of different compositions to overcome photoinduced halide segregation and still yielding a high open‐circuit voltage (V_oc). Herein, a home‐made high throughput robot setup is introduced performing automatic perovskite synthesis and characterization. Subsequently, four kinds of compositions (i.e., cation mixtures of Cs–methylammonium (MA), Cs– formamidinium (FA), MA–FA, and FA–MA) with an optical bandgap of ≈1.75 eV are identified as promising device candidates. For Cs–MA and Cs–FA films it is found that the Br–I phase segregation indeed can be overcome. Moreover, Cs–MA, MA–FA, and Cs–FA based devices exhibit an average V_oc of 1.17, 1.17, 1.12 V, and their maximum values approached 1.18, 1.19, 1.14 V, respectively, which are among the highest V_oc (≈1.2 V) values for ≈40% Br perovskite. These findings highlight that the high throughput approach can effectively and efficiently accelerate the invention of novel perovskites for advanced applications.     

The heterosis estimates for growth and survival traits in sterlet and Siberian sturgeon purebreds and hybrids

The aim of the present study was to estimate and compare the growth and survival traits of the hybrids and purebreds produced by crossing the Siberian sturgeon (Acipenser baerii) (S) and sterlet (Acipenser ruthenus) (St) in order to determine the heterosis effect in the F1 generation. We compared the breeding conditions, mean body weight (BW) and cumulative survival in the artificially produced hybrid crosses of sterlet and Siberian sturgeon with respect to their pure parental species in indoor and outdoor aquaculture systems at different developmental stages. Fertilization and hatching rates were found to be significantly higher in S × S purebred compared to St × S hybrid. The highest values of BW were recorded in St × S hybrid (557.54 ± 179.7 g) on 862 days post-hatch (dph) while the highest cumulative survival was recorded in S × S purebred (14.3%). The recorded cumulative survival and mean BW was significantly lower in St × St purebred. The highest positive heterosis was recorded for mean BW of St × S hybrid (51.3% on 862 dph) throughout the sampling points. The studied sturgeon hybrids had higher mean BW compared to St × St purebred under suboptimal rearing conditions. Although there was no clear demonstration of the superiority in performance of reciprocal hybrids over purebreds, the St × S hybrid can be used for achieving better productivity in aquaculture systems.