Effect of culture media and conditions on polyunsaturated fatty acids production by Mortierella alpina

To improve the polyunsaturated fatty acid (PUFA) production by Mortierella, culture media and conditions were investigated. M. alpina ATCC 32222 had the highest yield of arachidonic acid, gamma-linolenic acid and linoleic acid among 11 test microbes. Soluble starch at 10% and the mixture of KNO3 and yeast extract at 2:1 (w/w) was the best carbon and nitrogen sources for arachidonic acid and total PUFAs production, respectively. The optimal C/N ratio ranged from 5.1 to 9.0. Each gram of carbon produced 17.4 mg of linoleic acid, 17.0 mg of gamma-linolenic acid, 103.0 mg of arachidonic acid and 194.2 mg of total PUFAs at 20 degrees C, while it yielded 21.4 mg of linoleic acid, 25.6 mg of gamma-linolenic acid, 2.6 mg of gamma-linolenic acid, 110.3 mg of arachidonic acid, 4.3 mg of eicosapentaenoic acid and 218.4 mg of total PUFAs at 12 degrees C. A high degree of unsaturation was found at low temperature incubation. Linseed oil supplementation (1%, w/v) increased the PUFAs production and each gram of carbon produced 403.4 mg of alpha-linolenic acid, 123.1 mg of arachidonic acid, 33.6 mg of eicosapentaenoic acid, 1.68 mg of docosahexaenoic acid and 943.2 mg of total PUFAs. From the optimization of culture media and conditions, PUFAs production increased from 30% to 5 times that was optimal for practical use.     

Series quartz crystal sensor for remote bacteria population monitoring in raw milk via the Internet

A remote monitoring system based on a piezoelectric quartz crystal (SPQC) sensor was developed for the determination of the bacteria population in raw milk. The system employs the Windows XP server operating system, and its programs for data acquisition, display and transmission were developed using the LabVIEW 7.1 programming language. The circuit design consists of a circuit with a piezoelectric quartz crystal (SPQC) and a pair of electrodes. This system can provide dynamic data monitoring on a web-page via the Internet. Immersion of the electrodes in a cell culture with bacteria inoculums resulted in a change of frequency caused by the impedance change due to microbial metabolism and the adherence of bacteria on the surface of the electrodes. The calibration curve of detection times against density of bacteria showed a linear correlation coefficient (R(2) = 0.9165) over the range of 70-10(6) CFU ml(-1). The sensor could acquire sufficient data rapidly (within 4 h) and thus enabled real-time monitoring of bacteria growth via the Internet. This system has potential application in the detection of bacteria concentration of milk at dairy farms.     

Production and characterization of thermostable cellulases from Streptomyces transformant T3-1

A total of 26 thermophilic isolates, selected from a compost of agricultural waste, which was mostly composed of vegetable, corncob and rice straw, were cultivated at 50 °C for further studies of thermostable cellulase production. The thermostable cellulase gene from the chromosomal DNA of actinomycetes isolate no. 10 was shotgun-cloned and transformed into Streptomyces sp. IAF 10-164. A transformant, T3-1, was found to be a good strain for the production of thermostable cellulases. Cultivation of T3-1 in modified Mandels–Reese broth containing 1% carboxymethylcellulose (CMC)-sodium salt and the optimal condition for microbial growth were studied. Batch cultivation in a flask revealed that CMCase and Avicelase production reached the maximum between the third to fifth day, whereas maximum -glucosidase production occurred on the ninth day. Microbial biomass increased from the first day to the fifth day and then decreased. The crude enzyme had the highest activity at 50 °C and at pH 6.5. The enzyme was shown to be a thermostable cellulase whose activities were stable at 50 °C for more than 7 days.     

Thermostable cellulases from <Emphasis Type="Italic">Streptomyces</Emphasis>sp.: scale-up production in a 50-l fermenter

Thermostable cellulase was produced by Streptomyces sp. T3-1 grown in a 50-l fermenter. Maximum cellulase activity was attained on the fourth day when agitation speeds and aeration rates were controlled at 300 rpm and 0.75 vvm, respectively. Maximum enzyme activities were: 148 IU CMCase ml^–1, 45 IU Avicelase ml^–1, and 137 IU -glucosidase ml^–1 with productivity of 326 IU l^–1 h^–1, which were 10--32% higher than the values obtained in shake-flask culturesRevisions requested 12 October 2004/1 November 2004; Received received 1 November 2004/14 December 2004     

Polyunsaturated fatty acids production with a solid-state column reactor

To investigate the potential production of polyunsaturated fatty acids (PUFAs), a solid-state column reactor of rice bran with Mortierella alpina was used. The optimal conditions for PUFAs production were rice bran supplementation with 3.75% (ww(-1)) nitrogen source at initial moisture content 57%, initial pH 6-7, aeration, and incubation at 20 degrees C for 5 days and then at 12 degrees C for 7 days. Each gram of substrate carbon yielded 127 mg of total PUFAs, 12 mg of eicosapentaenoic acid (EPA), 6 mg of arachidonic acid (AA), 5mg of alpha-linolenic acid (ALA), and 117 mg of linoleic acid (LA) after 12 days incubation. Aeration enhanced the productions of AA, EPA, and total PUFAs. Supplementation of the nitrogen source on the fourth day and then a shift to lower temperature on the fifth day increased EPA production.