Distinct metal dependence for catalytic and structural functions in the L-arabinose isomerases from the mesophilic Bacillus halodurans and the thermophilic Geobacillus stearothermophilus

L-Arabinose isomerase (AI) catalyzes the isomerization of L-arabinose to L-ribulose. It can also convert d-galactose to d-tagatose at elevated temperatures in the presence of divalent metal ions. The araA genes, encoding AI, from the mesophilic bacterium Bacillus halodurans and the thermophilic Geobacillus stearothermophilus were cloned and overexpressed in Escherichia coli, and the recombinant enzymes were purified to homogeneity. The purified enzymes are homotetramers with a molecular mass of 232 kDa and close amino acid sequence identity (67%). However, they exhibit quite different temperature dependence and metal requirements. B. halodurans AI has maximal activity at 50 degrees C under the assay conditions used and is not dependent on divalent metal ions. Its apparent K(m) values are 36 mM for L-arabinose and 167 mM for d-galactose, and the catalytic efficiencies (k(cat)/K(m)) of the enzyme were 51.4 mM(-1)min(-1) (L-arabinose) and 0.4 mM(-1)min(-1) (d-galactose). Unlike B. halodurans AI, G. stearothermophilus AI has maximal activity at 65-70 degrees C, and is strongly activated by Mn(2+). It also has a much higher catalytic efficiency of 4.3 mM(-1)min(-1) for d-galactose and 32.5 mM(-1)min(-1)for L-arabinose, with apparent K(m) values of 117 and 63 mM, respectively. Irreversible thermal denaturation experiments using circular dichroism (CD) spectroscopy showed that the apparent melting temperature of B. halodurans AI (T(m)=65-67 degrees C) was unaffected by the presence of metal ions, whereas EDTA-treated G. stearothermophilus AI had a lower T(m) (72 degrees C) than the holoenzyme (78 degrees C). CD studies of both enzymes demonstrated that metal-mediated significant conformational changes were found in holo G. stearothermophilus AI, and there is an active tertiary structure for G. stearothermophilus AI at elevated temperatures for its catalytic activity. This is in marked contrast to the mesophilic B. halodurans AI where cofactor coordination is not necessary for proper protein folding. The metal dependence of G. stearothermophilus AI seems to be correlated with their catalytic and structural functions. We therefore propose that the metal ion requirement of the thermophilic G. stearothermophilus AI reflects the need to adopt the correct substrate-binding conformation and the structural stability at elevated temperatures.     

Cure of tuberculosis using nanotechnology: An overview

Mycobacterium tuberculosis is the causative agent of tuberculosis (TB), a major health issue of the present era. The bacterium inhabits the host macrophage and other immune cells where it modulates the lysosome trafficking protein, hinders the formation of phagolysosome, and blocks the TNF receptor-dependent apoptosis of host macrophage/monocytes. Other limitations such as resistance to and low bioavailability and bio-distribution of conventional drugs aid to their high virulence and human mortality. This review highlights the use of nanotechnology-based approaches for drug formulation and delivery which could open new avenues to limit the pathogenicity of tuberculosis. Moreover phytochemicals, such as alkaloids, phenols, saponins, steroids, tannins, and terpenoids, extracted from terrestrial plants and mangroves seem promising against M. tuberculosis through different molecular mechanisms. Further understanding of the genomics and proteomics of this pathogenic microbe could also help overcome various research gaps in the path of developing a suitable therapy against tuberculosis.     

Purification and characterization of an extracellular polysaccharide from haloalkalophilic Bacillus sp. I-450

During the course of investigation of haloalkalophilic bacteria, we screened some heavily polluted soil samples from the mudflats surrounding the city of Inchon, Korea, for their bioflocculant producing ability. Based on the screening, one isolate no. 450 tentatively identified as Bacillus sp. produced an extracellular polysaccharide having flocculation activity. The isolate produced the polysaccharide during the late logarithmic growth phase. The polymer could be recovered from the supernatant of the fermented medium by cold ethanol precipitation and purified by treating with cetylpyridinium chloride (CPC). The polymer was identified as an acidic polysaccharide containing neutral sugars, namely, galactose, fructose, glucose and raffinose, and uronic acids as major and minor components, respectively. The amount of neutral sugars, uronic acid and amino sugars were 52.4, 17.2 and 2.4%, respectively. The molecular weight of the polysaccharide was found to be 2.2×10⁶ Da. The Fourier transform infrared spectrophotometer (FT-IR) revealed typical characteristics of polysaccharides. ¹H NMR spectrum showed that the polymer is a heteroglycan. Thermogravimetric (TGA) analysis indicated the degradation temperature (T_d) at 290 °C. The rheological analysis of the polymer 450 revealed the pseudoplastic property with shear-thinning effect, while the compression test indicated that the polymer had high gel strength, and the S.E.M. studies showed that the polymer has a porous structure with small pore-size distribution indicating the compactness of the polymer.     

Draft Genome Sequence of Bacillus endophyticus 2102

Bacillus endophyticus 2102 is an endospore-forming, plant growth-promoting rhizobacterium isolated from a hypersaline pond in South Korea. Here we present the draft sequence of B. endophyticus 2102, which is of interest because of its potential use in the industrial production of algaecides and bioplastics and for the treatment of industrial textile effluents.     

Purification and characterization of a novel alkaline protease from Bacillus horikoshii

An investigation was conducted on the enhancement of production and purification of an oxidant and SDS-stable alkaline protease (BHAP) secreted by an alkalophilic Bacillus horikoshii, which was screened from the body fluid of a unique Korean polychaeta (Periserrula leucophryna) living in the tidal mud flats of Kwangwha Island in the Korean West Sea. A prominent effect on BHAP production was obtained by adding 2% maltose, 1% sodium citrate, 0.8% NaCl, and 0.6% sodium carbonate to the culturing medium. The optimal medium for BHAP production contained (g/l) SBM, 15; casein, 10; K(2)HPO(4), 2; KH(2)PO(4), 2; maltose, 20; sodium citrate, 10; MgSO(4), 0.06; NaCl, 8; and Na(2)CO(3), 6. A protease yield of approximately 56,000 U/ml was achieved using the optimized medium, which is an increase of approximately 5.5-fold compared with the previous optimization (10,050 U/ml). The BHAP was homogenously purified 34-fold with an overall recovery of 34% and a specific activity of 223,090 U/mg protein using adsorption with Diaion HPA75, hydrophobic interaction chromatography (HIC) on Phenyl-Sepharose, and ion-exchange chromatography on a DEAE- and CMSepharose column. The purified BHAP was determined a homogeneous by SDS-PAGE, with an apparent molecular mass of 28 kDa, and it showed extreme stability towards organic solvents, SDS, and oxidizing agents. The K(m) and k(cat) values were 78.7 μM and 217.4 s(-1) for N-succinyl-Ala- Ala-Pro-Phe-pNA at 37° C and pH 9, respectively. The inhibition profile exhibited by PMSF suggested that the protease from B. horikoshii belongs to the family of serine proteases. The BHAP, which showed high stability against SDS and H(2)O(2), has significance for industrial application, such as additives in detergent and feed industries.     

Decolorization method of crude alkaline protease preparation produced from an alkalophilic <Emphasis Type="Italic">Bacillus clausii</Emphasis>

Diaion HPA75 decolorized efficiently the crude preparation of novel alkaline protease produced by Bacillus clausii. The optimum concentrations of HPA75 and contact time for efficient decolorization were determined to be approximately 6 ∼ 10% (w/v) and 8 h, respectively. Color removal efficiency was improved at alkaline pH, and 21% color intensity was retained with a protease yield of 99.7% at pH 11. By using highly concentrated samples, a pattern of decolorization was achieved that was similar to that produced by unconcentrated enzyme preparations. After treatment with 6% HPA75 for 8 h, the residual color intensity was approximately 20% with a protease yield of nearly 100%. Used HPA75 could be regenerated easily, and the regenerated HPA75 was as effective as the fresh HPA75 for decolorization and protease recovery. The regeneration efficiency of the used Diaion HPA75 was greater than 90% until it was used four times. Considering these results, we suggest Diaion HPA75 is suitable for color removal applications, producing high protease yields from fermented broth.     

NMR resonance assignments for sparsely <Superscript>15</Superscript>N labeled proteins

For larger proteins, and proteins not amenable to expression in bacterial hosts, it is difficult to deduce structures using NMR methods based on uniform ¹³C, ¹⁵N isotopic labeling and observation of just nuclear Overhauser effects (NOEs). In these cases, sparse labeling with selected ¹⁵N enriched amino acids and extraction of a wider variety of backbone-centered structural constraints is providing an alternate approach. A limitation, however, is the absence of resonance assignment strategies that work without uniform ¹⁵N, ¹³C labeling or preparation of numerous samples labeled with pairs of isotopically labeled amino acids. In this paper an approach applicable to a single sample prepared with sparse ¹⁵N labeling in selected amino acids is presented. It relies on correlation of amide proton exchange rates, measured from data on the intact protein and on digested and sequenced peptides. Application is illustrated using the carbohydrate binding protein, Galectin-3. Limitations and future applications are discussed.     

Protein Production and Crystallization at SECSG – An Overview

Using a high degree of automation, the Southeast Collaboratory for Structural Genomics (SECSG) has developed high throughput pipelines for protein production, and crystallization using a two-tiered approach. Primary, or tier-1, protein production focuses on producing proteins for members of large Pfam families that lack a representative structure in the Protein Data Bank. Target genomes are Pyrococcus furiosus and Caenorhabditis elegans. Selected human proteins are also under study. Tier-2 protein production, or target rescue, focuses on those tier-1 proteins, which either fail to crystallize or give poorly diffracting crystals. This two tier approach is more efficient since it allows the primary protein production groups to focus on the production of new targets while the tier-2 efforts focus on providing additional sample for further studies and modified protein for structure determination. Both efforts feed the SECSG high throughput crystallization pipeline, which is capable of screening over 40 proteins per week. Details of the various pipelines in use by the SECSG for protein production and crystallization, as well as some examples of target rescue are described.     

A thermodynamic study of mesophilic, thermophilic, and hyperthermophilic L-arabinose isomerases: the effects of divalent metal ions on protein stability at elevated temperatures

To gain insight into the structural stability of homologous homo-tetrameric l-arabinose isomerases (AI), we have examined the isothermal guanidine hydrochloride (GdnHCl)-induced unfolding of AIs from mesophilic Bacillus halodurans (BHAI), thermophilic Geobacillus stearothermophilus (GSAI), and hyperthermophilic Thermotoga maritima (TMAI) using circular dichroism spectroscopy. The GdnHCl-induced unfolding of the AIs can be well described by a two-state reaction between native tetramers and unfolded monomers, which directly confirms the validity of the linear extrapolation method to obtain the intrinsic stabilities of these proteins. The resulting unfolding free energy (DeltaGU) values of the AIs as a function of temperature were fit to the Gibbs-Helmholtz equation to determine their thermodynamic parameters based on a two-state mechanism. Compared with the stability curves of BHAI in the presence and absence of Mn2+, those of holo GSAI and TMAI were more broadened than those of the apo enzymes at all temperatures, indicating increased melting temperatures (Tm) due to decreased heat capacity (DeltaGp). Moreover, the extent of difference in DeltaCp between the apo and holo thermophilic AIs is larger than that of BHAI. From these studies, we suggest that the metal dependence of the thermophilic AIs, resulting in the reduced DeltaCp, may play a significant role in structural stability compared to their mesophilic analogues, and that the extent of metal dependence of AI stability seems to be highly correlated to oligomerization.