On the Phospholipid Metabolism of Glial Cell Primary Cultures.

Abstract: Primary cultures were prepared from newborn rat brain. After 16-18 days, they consisted mainly of mature and immature astrocytes and oligodendrocytes, as judged by immunohistochemistry. To study the metabolism of ethanolamine glycerophospholipids, the cells were incubated with 1-[1-³H]alkyl- sn -glycero-3-phosphoethanolamine (1-alkyl-GPE), for 1–20 h. Five main products were formed: 1-alkyl-2-acyl-GPE; 1-alkyl-2-acyksn-glycero-3-phosphocholine (1-alkyl-2-acyl-GPC); 1-alkenyl-2-acyl-GPE (ethanolamine plasmalogen); 1-alkenyl-2-acyl-GPC (choline plasmalogen); and 1-alkyl-glycerol. Acylation of the substrate was the main reaction during the first 3 h of incubation, whereas desaturation to plasmaiogen reached a maximum after 12 h. Greater amounts of radioactivity were observed in the phosphatidylcholine fraction after longer incubation times. Only small amounts of choline plasmalogen were observed. The phosphatidylethanolamine fraction consisted of 26.5% diacyl-, 27.5% alkyl-acyl-, and 46.0% alkenyl-acyl- compounds, whereas the corresponding data for the phosphatidylcholine fraction were 78.5, 16.4, and 5.1%, respectively, after 20 h of incubation. Hydrolysis of the substrate to 1-alkyl-glycerol was a minor reaction.     

Calcium antagonists: A new class of therapeutic agents

A new class of therapeutic agents, sharing inhibition of the slow calcium channel, will soon be available to the American patient. Selective action of these agents upon the atrioventricular node, the smooth muscle of coronary and peripheral arteries, and the contractility of cardiac muscle opens new vistas in cardiovascular pharmacology. Early release of these agents by the Federal Drug Administration for general use is urged, based upon the already wide and successful experience in the European and South American continents.     

Developability studies before initiation of process development

Monoclonal antibodies constitute a robust class of therapeutic proteins. Their stability, resistance to stress conditions and high solubility have allowed the successful development and commercialization of over 40 antibody-based drugs. Although mAbs enjoy a relatively high probability of success compared with other therapeutic proteins, examples of projects that are suspended due to the instability of the molecule are not uncommon. Developability assessment studies have therefore been devised to identify early during process development problems associated with stability, solubility that is insufficient to meet expected dosing or sensitivity to stress. This set of experiments includes short-term stability studies at 2−8 þC, 25 þC and 40 þC, freeze-thaw studies, limited forced degradation studies and determination of the viscosity of high concentration samples. We present here three case studies reflecting three typical outcomes: (1) no major or unexpected degradation is found and the study results are used to inform early identification of degradation pathways and potential critical quality attributes within the Quality by Design framework defined by US Food and Drug Administration guidance documents; (2) identification of specific degradation pathway(s) that do not affect potency of the molecule, with subsequent definition of proper process control and formulation strategies; and (3) identification of degradation that affects potency, resulting in program termination and reallocation of resources.     

Fill Factor Losses in Cu2ZnSn(SxSe1−x)4 Solar Cells: Insights from Physical and Electrical Characterization of Devices and Exfoliated Films

Besides the open circuit voltage (V_OC) deficit, fill factor (FF) is the second most significant parameter deficit for earth‐abundant kesterite solar cell technology. Here, various pathways for FF loss are discussed, with focus on the series resistance issue and its various contributing factors. Electrical and physical characterizations of the full range of bandgap (E_g = 1.0–1.5 eV) Cu₂ZnSn(S_xSe_1?x)₄ (CZTSSe) devices, as well as bare and exfoliated films with various S/(S + Se) ratios, are performed. High intensity Suns‐V_OC measurement indicates a nonohmic junction developing in high bandgap CZTSSe. Grazing incidence X‐ray diffraction, Raman mapping, field emission scanning electron microscopy, and X‐ray photoelectron spectroscopy indicate the formation of Sn(S,Se)₂, Mo(S,Se)₂, and Zn(S,Se) at the high bandgap CZTSSe/Mo interface, contributing to the increased series resistance (R_S) and nonohmic back contact characteristics. This study offers some clues as to why the record‐CZTSSe solar cells occur within a bandgap range centered around 1.15 eV and offers some direction for further optimization.     

Impact of PbI2 Passivation and Grain Size Engineering in CH3NH3PbI3 Solar Absorbers as Revealed by Carrier‐Resolved Photo‐Hall Technique

With power conversion efficiencies now exceeding 25%, hybrid perovskite solar cells require deeper understanding of defects and processing to further approach the Shockley‐Queisser limit. One approach for processing enhancement and defect reduction involves additive engineering—, e.g., addition of MASCN (MA = methylammonium) and excess PbI₂ have been shown to modify film grain structure and improve performance. However, the underlying impact of these additives on transport and recombination properties remains to be fully elucidated. In this study, a newly developed carrier‐resolved photo‐Hall (CRPH) characterization technique is used that gives access to both majority and minority carrier properties within the same sample and over a wide range of illumination conditions. CRPH measurements on n‐type MAPbI₃ films reveal an order of magnitude increase in carrier recombination lifetime and electron density for 5% excess PbI₂ added to the precursor solution, with little change noted in electron and hole mobility values. Grain size variation (120–2100 nm) and MASCN addition induce no significant change in carrier‐related parameters considered, highlighting the benign nature of the grain boundaries and that excess PbI₂ must predominantly passivate bulk defects rather than defects situated at grain boundaries. This study offers a unique picture of additive impact on MAPbI₃ optoelectronic properties as elucidated by the new CRPH approach.     

Context-Dependent Role of Mitochondrial Fusion-Fission in Clonal Expansion of mtDNA Mutations

The accumulation of mutant mitochondrial DNA (mtDNA) molecules in aged cells has been associated with mitochondrial dysfunction, age-related diseases and the ageing process itself. This accumulation has been shown to often occur clonally, where mutant mtDNA grow in number and overpopulate the wild-type mtDNA. However, the cell possesses quality control (QC) mechanisms that maintain mitochondrial function, in which dysfunctional mitochondria are isolated and removed by selective fusion and mitochondrial autophagy (mitophagy), respectively. The aim of this study is to elucidate the circumstances related to mitochondrial QC that allow the expansion of mutant mtDNA molecules. For the purpose of the study, we have developed a mathematical model of mitochondrial QC process by extending our previous validated model of mitochondrial turnover and fusion-fission. A global sensitivity analysis of the model suggested that the selectivity of mitophagy and fusion is the most critical QC parameter for clearing de novo mutant mtDNA molecules. We further simulated several scenarios involving perturbations of key QC parameters to gain a better understanding of their dynamic and synergistic interactions. Our model simulations showed that a higher frequency of mitochondrial fusion-fission can provide a faster clearance of mutant mtDNA, but only when mutant–rich mitochondria that are transiently created are efficiently prevented from re-fusing with other mitochondria and selectively removed. Otherwise, faster fusion-fission quickens the accumulation of mutant mtDNA. Finally, we used the insights gained from model simulations and analysis to propose a possible circumstance involving deterioration of mitochondrial QC that permits mutant mtDNA to expand with age.     

Variants in the interleukin-1 alpha and beta genes,and the risk for periodontal disease in dogs

Elevated levels of interleukin-1 (IL-1) have been shown to amplify the inflammatory response against periodontopathogenic bacteria. In humans, polymorphisms in the IL1A and IL1B genes are the most well-studied genetic polymorphisms associated with periodontal disease (PD). In contrast to human, there is a lack of knowledge on the genetic basis of canine PD. A case–control study was conducted in which a molecular analysis of dog IL1A and IL1B genes was performed. Of the eight genetic variants identified, seven in IL1A gene and one in IL1B gene, IL1A/1_g.388A >C and IL1A/1_g.521T >A showed statistically significant differences between groups (adjusted OR (95% CI): 0.15 (0.03–0.76), P= 0.022; 5.76 (1.03–32.1), P= 0.046, respectively). It suggests that in the studied population the IL1A/1_g.388C allele is associated with a decreased PD risk, whereas the IL1A/1_g.521A allele can confer an increased risk. Additionally, the IL1A/2_g.515G >T variation resulted in a change of amino acid, i.e. glycine to valine. In silico analysis suggests that this change can alter protein structure and function, predicting it to be deleterious or damaging. This work suggests that IL1 genetic variants may be important in PD susceptibility in canines.