Agrobacterium-mediated transformation of apple (Malus x domestica Borkh.): an assessment of factors affecting regeneration of transgenic plants

We have previously developed a protocol for efficient gene transfer and regeneration of transgenic calli following cocultivation of apple (cv. Jonagold) explants with Agrobacterium tumefaciens (De Bondt et al. 1994, Plant Cell Reports 13: 587–593). Now we report on the optimization of postcultivation conditions for efficient and reproducible regeneration of transgenic shoots from the apple cultivar Jonagold. Factors which were found to be essential for efficient shoot regeneration were the use of gelrite as a gelling agent and the use of the cytokinin-mimicing thidiazuron in the selective postcultivation medium. Improved transformation efficiencies were obtained by combining the hormones thidiazuron and zeatin and by using leaf explants from in vitro grown shoots not older than 4 weeks after multiplication. Attempts to use phosphinothricin acetyl transferase as a selectable marker were not successful. Using selection on kanamycin under optimal postcultivation conditions, about 2% of the leaf explants developed transgenic shoots or shoot clusters. The presence and expression of the transferred genes was verified by -glucuronidase assays and Southern analysis. The transformation procedure has also been succesfully applied to several other apple cultivars.Abbreviations BAP benzylaminopurine - CTAB hexadecyltrimethylammoniumbromide - Na₂EDTA ethylenediamine-tetra-acetate ferric-sodium salt - FeNaEDTA ethylenediamine-tetra-acetate ferric-sodium salt - GA₃ gibberellic acid 3 - GusA -glucuronidase - gusA -glucuronidase gene of Escherichia coli - IAA indole acetic acid - IBA indole butyric acid - 2iP N6-2-isopentenyl adenine - NAA naphthalene acetic acid - nptII neomycinphosphotransferase II gene - bar phosphinothricin acetyl transferase gene - PCR polymerase chain reaction - PPT phosphinothricin - STS silver thiosulphate - T-DNA transferred DNA - TDZ thidiazuron - X-Gluc 5-bromo-4-chloro-3-indolyl -D-glucuronide - Zea trans-Zeatin     

High-throughput RNA extraction from plant samples based on homogenisation by reciprocal shaking in the presence of a mixture of sand and glass beads

We describe here a reliable high-throughput method for extraction of RNA from fresh or frozen plant tissue that obviates laborious and time-consuming homogenisation by mortar and pestle. The method is based on homogenisation by high-speed reciprocal shaking in presence of a mixture of inexpensive abrasive materials; i.e., quartz sand and glass beads. After homogenisation, the method follows a standard procedure for RNA extraction by phenol/LiCl. Yield and quality of RNA obtained by homogenisation with the sand/glass bead mix are identical to those obtained by mortar and pestle.     

Identification and characterization of 10 polymorphic microsatellite loci in the German cockroach,Blattella germanica

Primer sequences and initial characterization are presented for 10 microsatellite loci isolated from the German cockroach, Blattella germanica. In a sample of 30 individuals from a single population sample, all loci were polymorphic with two to 12 alleles segregating per locus and levels of observed heterozygosity ranging from 0.27 to 0.92. One locus showed a deficit of heterozygotes. Experimental conditions are described for polymerase chain reaction multiplexing, which enables the genotyping of eight loci in three electrophoretic runs consisting of one set of three and two sets of two markers. Seven primer sets cross‐amplify in the related Blattella asahinai.     

Amylopectin molecular structure reflected in macromolecular organization of granular starch

For lintners with negligible amylose retrogradation, crystallinity related inversely to starch amylose content and, irrespective of starch source, incomplete removal of amorphous material was shown. The latter was more pronounced for B-type than for A-type starches. The two predominant lintner populations, with modal degrees of polymerization (DP) of 13-15 and 23-27, were best resolved for amylose-deficient and A-type starches. Results indicate a more specific hydrolysis of amorphous lamellae in such starches. Small-angle X-ray scattering showed a more intense 9-nm scattering peak for native amylose-deficient A-type starches than for their regular or B-type analogues. The experimental evidence indicates a lower contrasting density within the "crystalline" shells of the latter starches. A higher density in the amorphous lamellae, envisaged by the lamellar helical model, explains the relative acid resistance of linear amylopectin chains with DP > 20, observed in lintners of B-type starches. Because amylopectin chain length distributions were similar for regular and amylose-deficient starches of the same crystal type, we deduce that the more dense (and ordered) packing of double helices into lamellar structures in amylose-deficient starches is due to a different amylopectin branching pattern.     

Use of the multi-allelic self-incompatibility gene in apple to assess homozygocity in shoots obtained through haploid induction

 To obtain homozygous genotypes of apple, we have induced haploid development of either the female or the male gametes by parthenogenesis in situ and anther culture, respectively. Of the shoots obtained, which were mainly of a non-haploid nature, some could be derived from fertilised egg cells or from sporophytic anther tissue. In order to select the shoots having a true haploid origin, and thus homozygotes, we decided to use the single multi-allelic self-incompatibility gene as a molecular marker to discriminate homozygous from heterozygous individuals. The rationale behind this approach was that diploid apple cultivars contain 2 different alleles of the S-gene and therefore the haploid induced shoots obtained from them should have only one of the alleles of the single parent. The parental cultivars used were ‘Idared’ (parthenogenesis in situ) and ‘Braeburn’ (androgenesis), and their S-genotypes were known, except for 1 of the ‘Braeburn’S-alleles. To stimulate parthenogenetic development ‘Idared’ styles were pollinated with irradiated ‘Baskatong’ pollen, the S-alleles of the latter (2n) cultivar were also unknown. The cloning and sequence analysis of these 3 unidentified S-alleles, 1 from ‘Braeburn’ and 2 from ‘Baskatong’ is described, and we show that they correspond to the S ₂₄ -, S ₂₆ - and S ₂₇ -alleles. We have optimised a method for analysis of the S-alleles of ‘Idared/Baskatong’- or ‘Braeburn’-derived in vitro plant tissues and have shown that this approach can be applied for the screening of the in vitro shoots for their haploid origin. Received: 18 August 1997 / Accepted: 10 September 1997     

Reshaping of sandstone surfaces by cryptoendolithic cyanobacteria: bioalkalization causes chemical weathering in arid landscapes

We report a novel weathering mechanism in South African sandstone formations, where cryptoendolithic cyanobacteria induce weathering by substrate alkalization during photosynthesis. As a result, the upper rock part is loosened and then eroded away by physical forces such as wind, water, trampling. This special type of ‘exfoliation’ is widely distributed and affects the geomorphology of whole sandstone mountain ranges and outcrops across several biomes. We show, that this weathering type is initiated by bioalkalization because of the photosynthesis of cryptoendolithic (i.e. those organisms living in small tight open spaces between the sand grains) cyanobacteria causing pH values high enough to enhance silica solution in the cryptoendolithic zone. As modern cyanobacteria are the initial photoautotrophic colonizers of bare rocks in arid and semiarid landscapes, it is possible that they may also have played a significant role in shaping sandstone landscapes in the geological past.     

Linear and threshold-dependent expression of secondary sexual traits in the same individual: insights from a horned beetle (Coleoptera: Scarabaeidae)

Elaborate horns or horn‐like structures in male scarab beetles commonly scale with body size either (a) in a linear fashion with horn size increasing relatively faster than body size or (b) in a threshold‐dependent, sigmoid fashion; that is, males smaller than a certain critical body size develop no or only rudimentary horns, whereas males larger than the threshold size express fully developed horns. The development of linear vs. sigmoid scaling relationships is thought to require fundamentally different regulatory mechanisms. Here we show that such disparate regulatory mechanisms may co‐occur in the same individual. Large males of the south‐east Asian Onthophagus (Proagoderus) watanabei (Ochi & Kon) (Scarabaeidae, Onthophagini) develop a pair of long, curved head horns as well as a single thoracic horn. We show that unlike paired head horns in a large number of Onthophagus species, in O. watanabei the relationship between head horns and body size is best explained by a linear model. Large males develop disproportionately longer horns than small males, but the difference in relative horn sizes across the range of body sizes is small compared to other Onthophagus species. However, the scaling relationship between the thoracic horn and body size is best explained by a strongly sigmoid model. Only males above a certain body size threshold express a thoracic horn and males smaller than this threshold express no horn at all. We found a significant positive correlation between head and thoracic horn length residuals, contrary to what would be expected if a resource allocation tradeoff during larval development would influence the length of both horn types. Our results suggest that the scaling relationship between body size and horn length, and the developmental regulation underlying these scaling relationships, may be quite different for different horns, even though these horns may develop in the same individual. We discuss our results in the context of the developmental biology of secondary sexual traits in beetles. © 2004 The Linnean Society of London, Biological Journal of the Linnean Society, 2004, 83 , 473–480.     

Combined monte carlo and molecular dynamics simulation of fully hydrated dioleyl and palmitoyl-oleyl phosphatidylcholine lipid bilayers

We have applied a new equilibration procedure for the atomic level simulation of a hydrated lipid bilayer to hydrated bilayers of dioleyl-phosphatidylcholine (DOPC) and palmitoyl-oleyl phosphatidylcholine (POPC). The procedure consists of alternating molecular dynamics trajectory calculations in a constant surface tension and temperature ensemble with configurational bias Monte Carlo moves to different regions of the configuration space of the bilayer in a constant volume and temperature ensemble. The procedure is applied to bilayers of 128 molecules of POPC with 4628 water molecules, and 128 molecules of DOPC with 4825 water molecules. Progress toward equilibration is almost three times as fast in central processing unit (CPU) time compared with a purely molecular dynamics (MD) simulation. Equilibration is complete, as judged by the lack of energy drift in 200-ps runs of continuous MD. After the equilibrium state was reached, as determined by agreement between the simulation volume per lipid molecule with experiment, continuous MD was run in an ensemble in which the lateral area was restrained to fluctuate about a mean value and a pressure of 1 atm applied normal to the bilayer surface. Three separate continuous MD runs, 200 ps in duration each, separated by 10,000 CBMC steps, were carried out for each system. Properties of the systems were calculated and averaged over the three separate runs. Results of the simulations are presented and compared with experimental data and with other recent simulations of POPC and DOPC. Analysis of the hydration environment in the headgroups supports a mechanism by which unsaturation contributes to reduced transition temperatures. In this view, the relatively horizontal orientation of the unsaturated bond increases the area per lipid, resulting in increased water penetration between the headgroups. As a result the headgroup-headgroup interactions are attenuated and shielded, and this contributes to the lowered transition temperature.