Role of Chitinase and Chitin Oligosaccharides in Lignification Response of Cultured Carrot Cells Treated with Mycelial Walls

Chitinase activity was induced in cultured carrot cells by incubationwith mycelial walls of a fungus, Chaetomium globosum. Both intra-and extracellular chitinases were resolved into four componentsby gel filtration chromatography. The extracellular enzymesliberated soluble oligosaccharides of different sizes from insolublechitin, suggesting that these carrot chitinases are endo-hydrolases.The solubilized chitinase digests obtained from insoluble mycelialwalls of C. globosum and chitin were fractionated by gel filtrationchromatography, and the elicitor activity of each fraction forthe accumulation of phenolic acids in cultured carrot cellswas determined. In both solubilized fragments of fungal wallsand of chitin, elicitor-active oligosaccharides were distributedin many fractions, however, potent activity for inducing phenolicacid synthesis was observed in the high molecular weight fractions. (Received October 5, 1987; Accepted February 12, 1988)     

Identification of an Rts1 DNA fragment conferring temperature-dependent instability to vector plasmids

The multiphenotypic drug resistance factor Rts1 expresses a temperature-dependent instability characteristic. This plasmid was digested with the restriction enzyme BamHI. A DNA fragment with a molecular weight of 5.6 MDa (the H fragment) was inserted into plasmid pBR322 (pFK896) or into pSC105 (pYH156) at the BamHI site. These plasmids were unstable at 42 degrees C but stable at 32 degrees C. A restriction-enzyme map of the H fragment was constructed and the instability phenotype (Tdi) was localized to a DNA fragment with 0.5 MDa molecular weight. The temperature-dependent loss of the unstable plasmid pFK896 is abrupt and no gradual plasmid loss of this multicopy recombinant plasmid is observed. The possibility that the Tdi phenotype is due to overgrowth of R- cells was eliminated.     

Rho-associated kinase, a novel serine/threonine kinase, as a putative target for small GTP binding protein Rho.

The small GTP binding protein Rho is implicated in cytoskeletal responses to extracellular signals such as lysophosphatidic acid to form stress fibers and focal contacts. Here we have purified a Rho-interacting protein with a molecular mass of approximately 164 kDa (p164) from bovine brain. This protein bound to GTPgammaS (a non-hydrolyzable GTP analog).RhoA but not to GDP.RhoA or GTPgammaS.RhoA with a mutation in the effector domain (RhoAA37).p164 had a kinase activity which was specifically stimulated by GTPgammaS.RhoA. We obtained the cDNA encoding p164 on the basis of its partial amino acid sequences and named it Rho-associated kinase (Rho-kinase). Rho-kinase has a catalytic domain in the N-terminal portion, a coiled coil domain in the middle portion and a zinc finger-like motif in the C-terminal portion. The catalytic domain shares 72% sequence homology with that of myotonic dystrophy kinase and the coiled coil domain contains a Rho-interacting interface. When COS7 cells were cotransfected with Rho-kinase and activated RhoA, some Rho-kinase was recruited to membranes. Thus it is likely that Rho-kinase is a putative target serine/threonine kinase for Rho and serves as a mediator of the Rho-dependent signaling pathway.     

Studies on phospholipases from Streptomyces. II. Purification and properties of Streptomyces hachijoensis phospholipase D.

1. Phospholipase D [EC 3.1.4.4] from Streptomyces hachijoensis was purified about 570-fold by column chromatography on DEAE-cellulose and Sephadex G-50 followed by isoelectric focusing. 2. The purified preparation was found to be homogeneous both by immunodiffusion and polyacrylamide disc gel electrophoresis. 3. The isoelectric point was found to be around pH 8.6 and the molecular weight was about 16,000. 4. The enzyme has maximal activity at pH 7.5 at 37 degrees. The optimal temperature is around 50 degrees at pH 7.5, using 20 min incubation. 5. The enzyme was stable at 50 degrees for 90 min. At neutral pH, between 6 and 8, the enzyme retained more than 95% of its activity on 24 hr incubation at 25 degrees. However, the enzyme lost 80% of its activity under the same conditions at pH 4.0. 6. The enzyme was stimulated slightly by Ca2+, Mn2+, and Co2+, and significantly by Triton X-100 and ethyl ether. It was inhibited by Sn2+, Fe2+, Fe3+, Al3+, EDTA, sodium dodecyl sulfate, sodium cholate, and cetylpyridinium chloride. 7. This phospholipase D hydrolyzes phosphatidylethanolamine, phosphatidylcholine, cardiolipin, sphingomyelin, phosphatidylserine, and lysophosphatidylcholine, liberating the corresponding bases. 8. The Km value was 4mM, determined with phosphatidylethanolamine as a substrate.     

Articular lesions in experimental Erysipelothrix insidiosa infection in rats.

Articular lesions were studied in the extremities and vertebral column in murine erysipelas infection. Pathologic alterations found in those different joint systems were essentially the same in character. In the early stage of infection, phlegmon-like inflammation was observed in the periarticular loose connective tissue. Abundant fine Gram-positive bacilli were free in inflamed edematous tissue. Then, active serofibrinous exudation and emigration of leukocytes occurred in the synovial membrane, articular cartilage, annulus fibrosus, and nucleus pulposus with the development of the disease. These exudative changes disappeared gradually. Instead of them, proliferation of synovial cells accompanied by dense infiltration with lymphocytes and plasma cells became conspicuous. At the same time, chondro- and osteoclastic activity occurred in the joints of the extremities or regions adjacent to the intervertebral disk. Capsular and subchondral pannus often resulted from an excessive proliferation of granulation tissue. In the late stage, they synovial membrane and granulation tissue underwent fibrosis, adhesion and ossification. Finally, these changes resulted in fibrous or bony ankylosis and deformation. Gram-positive bacilli were hardly detected in histological preparations derived from animals in the chronic stage when proliferative change was predominant in the articular lesions.     

A Novel Alveolate in Bivalves with Chemosynthetic Bacteria Inhabiting Deep‐Sea Methane Seeps

It has recently been unveiled that a wide variety of microbial eukaryotes (protists) occur in chemosynthetic ecosystems, such as hydrothermal vents and methane seeps. However, there is little knowledge regarding protists associated with endemic animals inhabiting these environments. In the present study, utilizing PCR techniques, we detected fragments of the small subunit ribosomal RNA gene (SSU rRNA gene) from a particular protist from gill tissues of a significant fraction of the vesicomyid clams Calyptogena soyoae and C. okutanii complex and of the mussel Bathymodiolus platifrons and B. japonicus, all of which harbor chemosynthetic endosymbiont bacteria and dominate methane seeps in Sagami Bay, Japan. Based on the phylogeny of SSU rRNA gene, the organism in question was shown to belong to Alveolata. It is noteworthy that this protist did not affiliate with any known alveolate group, although being deeply branched within the lineage of Syndiniales, for which the monophyly was constantly recovered, but not robustly supported. In addition, the protist detected using PCR followed by sequencing was localized within gill epithelial cells of B. platifrons with whole‐mount fluorescence in situ hybridization. This protist may be an endoparasite or an endocommensal of Calyptogena spp. and Bathymodiolus spp., and possibly have physiological and ecological impacts on these bivalves.     

Inhibition of Binding of Tomato Yellow Leaf Curl Virus Rep to its Replication Origin by Artificial Zinc-Finger Protein

Previously we demonstrated that inhibition of replication-associated protein (Rep) binding to its replication origin by artificial zinc-finger proteins (AZPs) is a powerful method to prevent plant virus infection in vivo. In the present study, we applied the AZP technology to Tomato yellow leaf curl virus (TYLCV), which is a limiting factor in tomato cultivation worldwide. First, we determined 5′-ATCGGTGT ATCGGTGT-3′ in the 195-bp intergenic region of the TYLCV-Israel strain, a strain reported first among TYLCV strains, as the Rep-binding site by gel shift assays. We then constructed a 6-finger AZP that bound to a 19-bp DNA including the Rep-binding site. We demonstrated that the binding affinity of the AZP was >1,000-fold greater than that of Rep and that the AZP inhibited Rep binding completely in vitro. Because the binding capability of the AZP was same as that of the AZP previously designed for geminivirus-resistant Arabidopsis thaliana, we predict that the present AZP will prevent TYLCV infection in vivo.     

Active Sensing System with In Situ Adjustable Sensor Morphology

Background

Despite the widespread use of sensors in engineering systems like robots and automation systems, the common paradigm is to have fixed sensor morphology tailored to fulfill a specific application. On the other hand, robotic systems are expected to operate in ever more uncertain environments. In order to cope with the challenge, it is worthy of note that biological systems show the importance of suitable sensor morphology and active sensing capability to handle different kinds of sensing tasks with particular requirements.

Methodology

This paper presents a robotics active sensing system which is able to adjust its sensor morphology in situ in order to sense different physical quantities with desirable sensing characteristics. The approach taken is to use thermoplastic adhesive material, i.e. Hot Melt Adhesive (HMA). It will be shown that the thermoplastic and thermoadhesive nature of HMA enables the system to repeatedly fabricate, attach and detach mechanical structures with a variety of shape and size to the robot end effector for sensing purposes. Via active sensing capability, the robotic system utilizes the structure to physically probe an unknown target object with suitable motion and transduce the arising physical stimuli into information usable by a camera as its only built-in sensor.

Conclusions/Significance

The efficacy of the proposed system is verified based on two results. Firstly, it is confirmed that suitable sensor morphology and active sensing capability enables the system to sense different physical quantities, i.e. softness and temperature, with desirable sensing characteristics. Secondly, given tasks of discriminating two visually indistinguishable objects with respect to softness and temperature, it is confirmed that the proposed robotic system is able to autonomously accomplish them. The way the results motivate new research directions which focus on in situ adjustment of sensor morphology will also be discussed.