Downstream protein separation by surfactant precipitation: a review

In a conventional protein downstream processing (DSP) scheme, chromatography is the single most expensive step. Despite being highly effective, it often has a low process throughput due to its semibatch nature, sometimes with nonreproducible results and relatively complex process development. Hence, more work is required to develop alternative purification methods that are more cost-effective, but exhibiting nearly comparable performance. In recent years, surfactant precipitation has been heralded as a promising new method for primary protein recovery that meets these criteria and is a simple and cost-effective method that purifies and concentrates. The method requires the direct addition of a surfactant to a complex solution (e.g. a fermentation broth) containing the protein of interest, where the final surfactant concentration is maintained below its critical micelle concentration (CMC) in order to allow for electrostatic and hydrophobic interactions between the surfactant and the target protein. An insoluble (hydrophobic) protein–surfactant complex is formed and backextraction of the target protein from the precipitate into a new aqueous phase is then carried out using either solvent extraction, or addition of a counter-ionic surfactant. Importantly, as highlighted by past researchers, the recovered proteins maintain their activity and structural integrity, as determined by circular dichroism (CD). In this review, various aspects of surfactant precipitation with respect to its general methodology and process mechanism, system parameters influencing performance, protein recovery, process selectivity and process advantages will be highlighted. Moreover, comparisons will be made to reverse micellar extraction, and the current drawbacks/challenges of surfactant precipitation will also be discussed. Finally, promising directions of future work with this separation technique will be highlighted.     

Production of bioethanol from four species of duckweeds (Landoltia punctata,Lemna aequinoctialis,Spirodela polyrrhiza,and Wolffia arrhiza) through optimization of saccharification process and fermentation with Saccharomyces cerevisiae

Duckweeds are promising potential sources for bioethanol production due to their high starch content and fast growth rate. We assessed the potential for four species, Landoltia punctata, Lemna aequinoctialis, Spirodela polyrrhiza, and Wolffia arrhiza, for bioethanol production. We also optimized a possible production procedure, which must include saccharification to convert starch to soluble sugars that can serve as a substrate for fermentation. Duckweeds were cultivated on 10% Hoagland solution for 12 days, harvested, dried, homogenized, and dissolved in solutions that were tested as substrates for bioethanol production by the yeast Saccharomyces cerevisiae. First, we optimized the saccharification process, including the ideal ratio of the enzyme used to convert starch into simple sugars. The greatest starch-to-sugar conversion was obtained when the α-amylase and amyloglucosidase was 2:1 (v/v) and with a 24 h incubation period at 50 °C. After saccharification, the solutions were incubated with the yeast, S. cerevisiae. The fermentation process was carried out for 48 h with 10% (v/v) yeast inoculum. The ethanol content was maximal approximately 24 h after the start of incubation, and the sugars and protein were minimal, with little change over the next 24 h. The final ethanol concentration obtained were 0.19, 0.17, 0.19, and 0.16 g ethanol/g dry biomass for L. punctata, L. aequinoctialis, S. polyrrhiza, and W. arrhiza respectively. We suggest that these four species of duckweed have the potential to serve sources of bioethanol and hope that the procedure we have optimized proves useful in the endeavour.     

Molecular and allergenic characterization of recombinant tropomyosin from mud crab Scylla olivacea

Molecular Biology Reports - Tropomyosin is a major allergen in crustaceans, including mud crab species, but its molecular and allergenic properties in Scylla olivacea are not well known. Thus, this...     

Isolation and characterization of solvent-tolerant Pseudomonas putida strain T-57, and its application to biotransformation of toluene to cresol in a two-phase (organic-aqueous) system

Pseudomonas putida T-57 was isolated from an activated sludge sample after enrichment on mineral salts basal medium with toluene as a sole source of carbon. P. putida T-57 utilizes n-butanol, toluene, styrene, m-xylene, ethylbenzene, n-hexane, and propylbenzene as growth substrates. The strain was able to grow on toluene when liquid toluene was added to mineral salts basal medium at 10-90% (v/v), and was tolerant to organic solvents whose log P(ow) (1-octanol/water partition coefficient) was higher than 2.5. Enzymatic and genetic analysis revealed that P. putida T-57 used the toluene dioxygenase pathway to catabolize toluene. A cis-toluene dihydrodiol dehydrogenase gene (todD) mutant of T-57 was constructed using a gene replacement technique. The todD mutant accumulated o-cresol (maximum 1.7 g/L in the aqueous phase) when cultivated in minimal salts basal medium supplemented with 3% (v/v) toluene and 7% (v/v) 1-octanol. Thus, T-57 is thought to be a good candidate host strain for bioconversion of hydrophobic substrates in two-phase (organic-aqueous) systems.     

Microalgae as multi-functional options in modern agriculture: current trends,prospects and challenges

Algae are a group of ubiquitous photosynthetic organisms comprising eukaryotic green algae and Gram-negative prokaryotic cyanobacteria, which have immense potential as a bioresource for various industries related to biofuels, pharmaceuticals, nutraceuticals and feed. This fascinating group of organisms also has applications in modern agriculture through facilitating increased nutrient availability, maintaining the organic carbon and fertility of soil, and enhancing plant growth and crop yields, as a result of stimulation of soil microbial activity. Several cyanobacteria provide nitrogen fertilization through biological nitrogen fixation and through enzymatic activities related to interconversions and mobilization of different forms of nitrogen. Both green algae and cyanobacteria are involved in the production of metabolites such as growth hormones, polysaccharides, antimicrobial compounds, etc., which play an important role in the colonization of plants and proliferation of microbial and eukaryotic communities in soil. Currently, the development of consortia of cyanobacteria with bacteria or fungi or microalgae or their biofilms has widened their scope of utilization. Development of integrated wastewater treatment and biomass production systems is an emerging technology, which exploits the nutrient sequestering potential of microalgae and its valorisation. This review focuses on prospects and challenges of application of microalgae in various areas of agriculture, including crop production, protection and natural resource management. An overview of the recent advances, novel technologies developed, their commercialization status and future directions are also included.     

In vitro propagation of four saponin producing <Emphasis Type="Italic">Maesa</Emphasis> species

A successful micropropagation system was developed for four different medicinal Maesa species. Multiple shoots were induced through both axillary bud formation and adventitious shoot regeneration from leaf explants. The explants were cultured on Murashige and Skoog (MS) medium supplemented with 6-benzyladenine (BA), thidiazuron (TDZ) and/or α-naphthalene acetic acid (NAA). The success of regeneration varied for different species and depended on the type and concentration of plant growth regulators. Regenerated shoots spontaneously developed roots within 6 weeks on MS hormone-free medium. The rooted shoots were transferred to the greenhouse with a 100% success rate. Furthermore, flow cytometry analysis indicated that there were no changes in ploidy level of those regenerated shoots as compared with wild type adult plants. Thin layer chromatography (TLC) analysis revealed that common and distinguishing spot of saponins were similarly observed in regenerated shoots compared to the control plants. Therefore, the protocol also provides an effective means for the in vitro conservation of Maesa spp. that produce pharmaceutically interesting saponins.     

Isolation and characterization of solvent-tolerant Pseudomonas putida strain T-57, and its application to biotransformation of toluene to cresol in a two-phase (organic-aqueous) system

Pseudomonas putida T-57 was isolated from an activated sludge sample after enrichment on mineral salts basal medium with toluene as a sole source of carbon. P. putida T-57 utilizes n-butanol, toluene, styrene, m-xylene, ethylbenzene, n-hexane, and propylbenzene as growth substrates. The strain was able to grow on toluene when liquid toluene was added to mineral salts basal medium at 10–90% (v/v), and was tolerant to organic solvents whose log  P _ow (1-octanol/water partition coefficient) was higher than 2.5. Enzymatic and genetic analysis revealed that P. putida T-57 used the toluene dioxygenase pathway to catabolize toluene. A cis-toluene dihydrodiol dehydrogenase gene (todD) mutant of T-57 was constructed using a gene replacement technique. The todD mutant accumulated o-cresol (maximum 1.7 g/L in the aqueous phase) when cultivated in minimal salts basal medium supplemented with 3% (v/v) toluene and 7% (v/v) 1-octanol. Thus, T-57 is thought to be a good candidate host strain for bioconversion of hydrophobic substrates in two-phase (organic-aqueous) systems.

     

Microbial lipid extraction from Lipomyces starkeyi using irreversible electroporation

The aim of the study was to investigate the feasibility of using irreversible electroporation (EP) as a microbial cell disruption technique to extract intracellular lipid within short time and in an eco‐friendly manner. An EP circuit was designed and fabricated to obtain 4 kV with frequency of 100 Hz of square waves. The yeast cells of Lipomyces starkeyi (L. starkeyi) were treated by EP for 2‐10 min where the distance between electrodes was maintained at 2, 4, and 6 cm. Colony forming units (CFU) were counted to observe the cell viability under the high voltage electric field. The forces of the pulsing electric field caused significant damage to the cell wall of L. starkeyi and the disruption of microbial cells was visualized by field emission scanning electron microscopic (FESEM) image. After breaking the cell wall, lipid was extracted and measured to assess the efficiency of EP over other techniques. The extent of cell inactivation was up to 95% when the electrodes were placed at the distance of 2 cm, which provided high treatment intensity (36.7 kWh m^?3). At this condition, maximum lipid (63 mg g^?1) was extracted when the biomass was treated for 10 min. During the comparison, EP could extract 31.88% lipid while the amount was 11.89% for ultrasonic and 16.8% for Fenton's reagent. The results recommend that the EP is a promising technique for lowering the time and solvent usage for lipid extraction from microbial biomass. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:838–845, 2018     

Adventitious rooting of Jatropha curcas L. is stimulated by phloroglucinol and by red LED light

An efficient root induction system has been established for in vitro-regenerated Jatropha curcas L. shoots. Callus formation on shoots transferred to auxin containing medium was found to be a prominent and recurrent problem for rooting of in vitro-cultivated J. curcas. In particular, the type of auxins and cytokinins applied in the culture media were shown to strongly influence the severity of callus formation. Shoots cultivated on meta-methoxytopolin riboside (MemTR) were free of callus and produced elongated stems and well-developed leaves in comparison to the cytokinins benzyl adenine, zeatin, and thidiazuron. Subsequent root induction experiments were performed with shoots precultured on MemTR-containing medium. Shoots were excised and transferred to Murashige and Skoog (MS) medium supplemented with different concentrations of indole-3-butyric acid (IBA), indole-3-acetic acid (IAA), and α-naphtaleneacetic acid (NAA). The induction of excessive callus formation was avoided only on IBA-containing medium. The optimum rooting medium with good root induction (35%) and 1.2 roots per shoot contained half-strength MS salts supplemented with 2.5 μM IBA. The same medium supplemented with 0.25% (w/v) activated charcoal produced 46% rooted shoots. Further improvement of rooting was obtained by transferring in vitro grown shoots to woody plant medium containing phloroglucinol (PG). In the presence of 2.5 μM IBA and 238 μM PG, 83% of the shoots rooted with on average 3.1 roots per shoot. We also analyzed the impact of light quality on the rooting capacity of Jatropha in vitro grown shoots. In general, light-emitting diodes (LEDs) light sources were less efficient for root induction. Red LED light provided the most favorable growth conditions, inducing a rooting response in 65% of the shoots, which produced on average 5.5 roots per shoot. These results indicate that adventitious rooting in J. curcas is under control of photoreceptors and that optimal rooting requires fine-tuning of the salt concentration, auxin, and cytokinin balance and application of synergistic compounds.