Endogenous tissue engineering: PTH therapy for skeletal repair

Based on its proven anabolic effects on bone in osteoporosis patients, recombinant parathyroid hormone (PTH_1-34) has been evaluated as a potential therapy for skeletal repair. In animals, the effect of PTH_1-34 has been investigated in various skeletal repair models such as fractures, allografting, spinal arthrodesis and distraction osteogenesis. These studies have demonstrated that intermittent PTH_1-34 treatment enhances and accelerates the skeletal repair process via a number of mechanisms, which include effects on mesenchymal stem cells, angiogenesis, chondrogenesis, bone formation and resorption. Furthermore, PTH_1-34 has been shown to enhance bone repair in challenged animal models of aging, inflammatory arthritis and glucocorticoid-induced bone loss. This pre-clinical success has led to off-label clinical use and a number of case reports documenting PTH_1-34 treatment of delayed-unions and non-unions have been published. Although a recently completed phase 2 clinical trial of PTH_1-34 treatment of patients with radius fracture has failed to achieve its primary outcome, largely because of effective healing in the placebo group, several secondary outcomes are statistically significant, highlighting important issues concerning the appropriate patient population for PTH_1-34 therapy in skeletal repair. Here, we review our current knowledge of the effects of PTH_1-34 therapy for bone healing, enumerate several critical unresolved issues (e.g., appropriate dosing regimen and indications) and discuss the long-term potential of this drug as an adjuvant for endogenous tissue engineering.     

Molecular phylogeny of the fungus gnat subfamilies Gnoristinae and Mycomyinae,and their position within Mycetophilidae (Diptera)

The phylogeny of the fungus gnat family Mycetophilidae (Diptera) is reconstructed with a focus on the species‐rich and taxonomically difficult subfamilies Gnoristinae and Mycomyinae. The multigene phylogenetic analyses are based on five nuclear (18S, 28S, CAD, MCS, ITS2) and four mitochondrial (12S, 16S, COI, CytB) gene markers. The analyses strongly support the monophyly of Mycetophilidae and the subfamilies Manotinae, Sciophilinae, Leiinae, and Mycomyinae, although Gnoristinae is paraphyletic with respect to Mycetophilinae. All the genera and groups of genera included are supported as monophyletic, except for Acomoptera Vockeroth, Boletina Staeger, Dziedzickia Johannsen, Ectrepesthoneura Enderlein, and Neoempheria Osten Sacken. Ancestral character state reconstructions were applied to two morphological features present in Gnoristinae and Mycomyinae (i.e. presence of setae on wing membrane and wing vein R₄) in order to assess their evolution. The wing vein R₄ appears as an unstable character, spread throughout different clades. A dated phylogeny of the family Mycetophilidae showed that most of the subfamilies of Mycetophilidae originated and diversified during the Cretaceous. The youngest subfamilies, originated in the Paleogene, appear to be Mycomyinae and Mycetophilinae.     

Identifying common prognostic factors in genomic cancer studies: A novel index for censored outcomes

Background  

With the growing number of public repositories for high-throughput genomic data, it is of great interest to combine the results produced by independent research groups. Such a combination allows the identification of common genomic factors across multiple cancer types and provides new insights into the disease process. In the framework of the proportional hazards model, classical procedures, which consist of ranking genes according to the estimated hazard ratio or the p-value obtained from a test statistic of no association between survival and gene expression level, are not suitable for gene selection across multiple genomic datasets with different sample sizes. We propose a novel index for identifying genes with a common effect across heterogeneous genomic studies designed to remain stable whatever the sample size and which has a straightforward interpretation in terms of the percentage of separability between patients according to their survival times and gene expression measurements.     

An implantable transducer for measuring tension in an anterior cruciate ligament graft.

The goal of this study was to develop a new implantable transducer for measuring anterior cruciate ligament (ACL) graft tension postoperatively in patients who have undergone ACL reconstructive surgery. A unique approach was taken of integrating the transducer into a femoral fixation device. To devise a practical in vivo calibration protocol for the fixation device transducer (FDT), several hypotheses were investigated: (1) The use of a cable versus the actual graft as the means for applying load to the FDT during calibration has no significant effect on the accuracy of the FDT tension measurements; (2) the number of flexion angles at which the device is calibrated has no significant effect on the accuracy of the FDT measurements; (3) the friction between the graft and femoral tunnel has no significant effect on measurement accuracy. To provide data for testing these hypotheses, the FDT was first calibrated with both a cable and a graft over the full range of flexion. Then graft tension was measured simultaneously with both the FDT on the femoral side and load cells, which were connected to the graft on the tibial side, as five cadaver knees were loaded externally. Measurements were made with both standard and overdrilled tunnels. The error in the FDT tension measurements was the difference between the graft tension measured by the FDT and the load cells. Results of the statistical analyses showed that neither the means of applying the calibration load, the number of flexion angles used for calibration, nor the tunnel size had a significant effect on the accuracy of the FDT. Thus a cable may be used instead of the graft to transmit loads to the FDT during calibration, thus simplifying the procedure. Accurate calibration requires data from just three flexion angles of 0, 45, and 90 deg and a curve fit to obtain a calibration curve over a continuous range of flexion within the limits of this angle group. Since friction did not adversely affect the measurement accuracy of the FDT, the femoral tunnel can be drilled to match the diameter of the graft and does not need to be overdrilled. Following these procedures, the error in measuring graft tension with the FDT averages less than 10 percent relative to a full-scale load of 257 N.     

Effect of various methods of immobilization on the stability of a microbial biosensor for surfactants based onPseudomonas rathonis T

The operating and storage stability of a receptor element of an amperometric biosensor based on thePseudomonas rathonis strain T capable of degrading surfactants was tested. Microbial cells were immobilized by incorporation in gels (agar, agarose, and calcium-alginate), polyvinyl alcohol membrane, adhesion to Chromatographic paper GF/A, or by cross-linking induced by glutaric aldehyde. Incorporation of microbial cells in agar gel provides long-standing conservation of their activity and viability during measurements of high concentrations of surfactants and allows the receptor element of the biosensor to be rapidly recovered after measurements.     

Distribution of matter in the current-carrying plasma and dense core of the discharge channel formed upon electrical wire explosion

Distribution of matter in the discharge channel formed upon a nanosecond electrical explosion of a single wire in air and vacuum was studied experimentally. Simultaneous use of optical, UV, and X-ray diagnostics made it possible to distinguish qualitatively different regions of the discharge channel, such as the current-carrying layers and the region occupied by a weakly conducting cold plasma. Several series of experiments with 25-μm-diameter 12-mm-long wires made of different materials were performed. The charging voltage and the current amplitude were varied in the ranges of U ₀ = 10–20 kV and I _max ∼ 5–10 kA, respectively. Explosion regimes with a current pause and with and without current interruption, as well as with wire preheating in air and vacuum, were studied. Shadow and schlieren images of the discharge channel were obtained using optical probing at the second harmonic of a YAG: Nd⁺³ laser (λ = 0.532 μm, τ ∼ 10 ns). In the experiments carried out in vacuum, X-ray images of the discharge channel were also obtained using an X-pinch as a point source of probing radiation and UV images were recorded using a four-frame MCP camera.     

Suppression of A-type potassium current in pyramidal neurons of the rat hippocampus, induced by pinacidil and its fluorine derivatives

With the use of a patch-clamp technique in the whole-cell configuration, we studied the effects of pinacidil and its fluorine derivatives on A-type potassium current (I _A) through the membrane of pyramidal neurons of the rat hippocampus. Hydrogen peroxide (10 mM) exerted no influence on the rate of inactivation ofI _A; therefore, this current is probably mediated by Shal Kv4.2 potassium channels. Pinacidil demonstrated the properties of a weakI _A blocker: in the 500 μM concentration it blocked about 45% of the current, while 50 μM of pinacidil fluorine derivatives were capable of blocking up to 30% ofI _A. The effects of pinacidil and its derivatives showed no dependence on the stimulating potential. A similar pattern of the effects of pinacidil fluorine derivatives, which are an order of magnitude stronger than those of pinacidil itself, allows us to suppose that the imine nitrogen of the tested compounds is significantly more involved in the molecular interaction with the site of an A-type potassium channel than the pyridine nitrogen.     

Gold nanoparticles disturb nuclear chromatin decondensation in mouse sperm in vitro

The effect of gold nanoparticles on mouse epididymal sperm has been studied using the model system of nuclear chromatin decondensation in vitro. It is shown that the treatment of gametes, preliminary membrane-freed by sodium dodecyl sulfate, in the mediums containing gold nanoparticles (with diameter ∼2.5 nm) in concentrations 1.0 × 10¹⁵ or 0.5 × 10¹⁵ particles/ml and following incubation in dithiothreitol solution (DTT) resulted in failure of chromatin decondensation process and nucleus structure. We conclude that gold nanoparticles possess spermatotoxicity. The mechanism of cytotoxic effect of gold nanoparticles may be related with their interaction with molecules of double-helix DNA. The model system studied in this research is applicable for further investigations of cytotoxic effects of nanoparticles of different origin and made of different metals.     

Direct Comparisons of 2D and 3D Dental Microwear Proxies in Extant Herbivorous and Carnivorous Mammals

The analysis of dental microwear is commonly used by paleontologists and anthropologists to clarify the diets of extinct species, including herbivorous and carnivorous mammals. Currently, there are numerous methods employed to quantify dental microwear, varying in the types of microscopes used, magnifications, and the characterization of wear in both two dimensions and three dimensions. Results from dental microwear studies utilizing different methods are not directly comparable and human quantification of wear features (e.g., pits and scratches) introduces interobserver error, with higher error being produced by less experienced individuals. Dental microwear texture analysis (DMTA), which analyzes microwear features in three dimensions, alleviates some of the problems surrounding two-dimensional microwear methods by reducing observer bias. Here, we assess the accuracy and comparability within and between 2D and 3D dental microwear analyses in herbivorous and carnivorous mammals at the same magnification. Specifically, we compare observer-generated 2D microwear data from photosimulations of the identical scanned areas of DMTA in extant African bovids and carnivorans using a scanning white light confocal microscope at 100x magnification. Using this magnification, dental microwear features quantified in 2D were able to separate grazing and frugivorous bovids using scratch frequency; however, DMTA variables were better able to discriminate between disparate dietary niches in both carnivorous and herbivorous mammals. Further, results demonstrate significant interobserver differences in 2D microwear data, with the microwear index remaining the least variable between experienced observers, consistent with prior research. Overall, our results highlight the importance of reducing observer error and analyzing dental microwear in three dimensions in order to consistently interpret diets accurately.