Free and polymerized tubulin in cultured bone cells and Chinese hamster ovary cells: the influence of cold and hormones

A low pH method of liposome-membrane fusion (Schneider et al., 1980, Proc. Natl. Acad. Sci. U. S. A. 77:442) was used to enrich the mitochondrial inner membrane lipid bilayer 30-700% with exogenous phospholipid and cholesterol. By varying the phospholipid-to- cholesterol ratio of the liposomes it was possible to incorporate specific amounts of cholesterol (up to 44 mol %) into the inner membrane bilayer in a controlled fashion. The membrane surface area increased proportionally to the increase in total membrane bilayer lipid. Inner membrane enriched with phospholipid only, or with phospholipid plus cholesterol up to 20 mol %, showed randomly distributed intramembrane particles (integral proteins) in the membrane plane, and the average distance between intramembrane particles increased proportionally to the amount of newly incorporated lipid. Membranes containing between 20 and 27 mol % cholesterol exhibited small clusters of intramembrane particles while cholesterol contents above 27 mol % resulted in larger aggregations of intramembrane particles. In phospholipid-enriched membranes with randomly dispersed intramembrane particles, electron transfer activities from NADH- and succinate-dehydrogenase to cytochrome c decreased proportionally to the increase in distance between the particles. In contrast, these electron- transfer activities increased with decreasing distances between intramembrane particles brought about by cholesterol incorporation. These results indicate that (a) catalytically interacting redox components in the mitochondrial inner membrane such as the dehydrogenase complexes, ubiquinone, and heme proteins are independent, laterally diffusible components; (b) the average distance between these redox components is effected by the available surface area of the membrane lipid bilayer; and (c) the distance over which redox components diffuse before collision and electron transfer mediates the rate of such transfer.     

Catalytic activity of cytochrome oxidase and cytochrome c in apolar solvents containing phospholipids and low amounts of water

Cytochrome c and cytochrome oxidase, in bovine heart submitochondrial particles and in their purified forms, were transferred to a ternary system that contained phospholipids (10 mg/ml toluene), the apolar solvent toluene, and water at concentrations of 13-15 microliters (high water) and 3 microliters (low water) per milliliter of toluene. When the enzymes were transferred back to an all water system, they exhibited full catalytic capacity. In the low water ternary system, cytochrome c could be reduced by ascorbate introduced via inverted micelles. Also in this system, cytochrome oxidase was reduced by ascorbate and cytochrome c but its oxidation was highly impaired. Data on the kinetics of reduction by ascorbate of cytochrome c and cytochrome oxidase under these conditions are presented. Cytochrome oxidase reduced in the organic solvent by ascorbate failed to form a complex with CO, but formed a complex with cyanide introduced via inverted micelles. The oxidized and the ascorbate-reduced cytochrome oxidase-cyanide complex exhibited a trough at 415 nm and a peak at 433 nm. The extent and rate of formation of the cyanide complex were higher with the reduced form of cytochrome oxidase. To achieve protein-protein interactions (cytochrome c-cytochrome oxidase) in the ternary system, it was necessary to extract the two proteins together. There was no functional interaction when they were extracted separately and mixed. In the high water ternary system reduced cytochrome oxidase was not detected, and it oxidized ascorbate at a higher rate than in the low water system; however, this rate was several orders of magnitude lower than in aqueous media.     

The daily variations of airborne fungal spores in Mexico City

The daily and seasonal distribution of airborne fungal particles was recorded in a high altitude tropical zone. Sampling was carried out in the southern part of Mexico City. An Andersen air sampler was used over a period of six months. Ten minutes sampling for each set of plates was done at fixed schedule: 07:30, 14:00 and 19:00 hours. The sampler was placed 10 m above the ground. Daily variation was found to be associated with the season, weather and atmospheric stability. The highest value of mold counts (3195 CFU m⁻³) was recorded in the evening on October, a transitional month between the rainy and the dry seasons, the lowest (45 CFU m⁻³) at noon during the rainy season. Mold counts were significantly correlated with temperature, having negative signs both in the morning and at noon, and being positive in the evening. The abundance of only three genera was recorded.Cladosporium, was isolated more frequently, and its abundance at 14:00 h was of 38%;Alternaria represented 4.0%, at 14:00 h, andAspergillus 3.0% at 7:30 h. Fifteen species belonging to the latter genera were identified and most of them are considered as opportunistic molds of clinical significance.     

Movements and associations of ribosomal subunits in a secretory cell during growth inhibition by starvation

In Chironomus tentans salivary gland cells, the cytoplasm can be dissected into concentric zones situated at increasing distances from the nuclear envelope. After RNA labeling, the newly made ribosomal subunits are found in the cytoplasm mainly in the neighborhood of the nucleus with a gradient of increasing abundance towards the periphery of the cell. The gradient for the small subunit lasts for a few hours and disappears entirely after treatment with puromycin. The large subunit also forms a gradient but one which is only partially abolished by puromycin. The residual gradient which which is resistant to the addition of the drug is probably due to the binding of some large ribosomal units to the membranes of the endoplasmic reticulum (J.-E. Edstrom and u. Lonn. 1976. J. Cell Biol. 70:562-572, and U. Lonn and J.-E. Edstrom. 1976. J. Cell. Biol. 70:573-580). If growth is inhibited by starvation, only the puromycin-sensitive type gradient is observed for the large subunit, suggesting that the attachment of these newly made subunits to the endoplasmic reticulum membranes will not occur. If, on the other hand, the drug-resistant gradient is allowed to form in feeding animals, it is conserved during a subsequent starvation for longer periods than in control feeding animals. This observation provides a further support for an effect of starvation on the normal turnover of the large subunits associated with the endoplasmic reticulum. These results also indicate a considerable structural stability in the cytoplasm of these cells worth little or no gross redistribution of cytoplasmic structures over a period of at least 6 days.     

Glutaminyl‐tRNA Synthetase from Pseudomonas aeruginosa: Characterization,structure, and development as a screening platform

Pseudomonas aeruginosa has a high potential for developing resistance to multiple antibiotics. The gene (glnS) encoding glutaminyl‐tRNA synthetase (GlnRS) from P. aeruginosa was cloned and the resulting protein characterized. GlnRS was kinetically evaluated and the K_M and k_cat^obs, governing interactions with tRNA, were 1.0 μM and 0.15 s^?1, respectively. The crystal structure of the α₂ form of P. aeruginosa GlnRS was solved to 1.9 Å resolution. The amino acid sequence and structure of P. aeruginosa GlnRS were analyzed and compared to that of GlnRS from Escherichia coli. Amino acids that interact with ATP, glutamine, and tRNA are well conserved and structure overlays indicate that both GlnRS proteins conform to a similar three‐dimensional structure. GlnRS was developed into a screening platform using scintillation proximity assay technology and used to screen ~2,000 chemical compounds. Three inhibitory compounds were identified and analyzed for enzymatic inhibition as well as minimum inhibitory concentrations against clinically relevant bacterial strains. Two of the compounds, BM02E04 and BM04H03, were selected for further studies. These compounds displayed broad‐spectrum antibacterial activity and exhibited moderate inhibitory activity against mutant efflux deficient strains of P. aeruginosa and E. coli. Growth of wild‐type strains was unaffected, indicating that efflux was likely responsible for the lack of sensitivity. The global mode of action was determined using time‐kill kinetics. BM04H03 did not inhibit the growth of human cell cultures at any concentration and BM02E04 only inhibit cultures at the highest concentration tested (400 μg/ml). In conclusion, GlnRS from P. aeruginosa is shown to have a structure similar to that of E. coli GlnRS and two natural product compounds were identified as inhibitors of P. aeruginosa GlnRS with the potential for utility as lead candidates in antibacterial drug development in a time of increased antibiotic resistance.     

Effect of acyl-CoA oxidase activity on the accumulation of gamma-decalactone by the yeast Yarrowia lipolytica: a factorial approach

beta-Oxidation is a cyclic pathway involved in the degradation of lipids. In yeast, it occurs in peroxisomes and the first step is catalyzed by an acyl-CoA oxidase (Aoxp). The yeast Yarrowia lipolytica possesses several genes (POX) coding for Aoxps. This study is based on the factorial analysis of results obtained with the many POX derivative strains that have been constructed previously. The effect of interactions between Aoxps on the acyl-CoA oxidase (Aox) activity was important even at the second order. We then investigated the effect of Aox activity on growth and lactone production. Aox activity was correlated with acidification of the medium by cells and with cellular growth but not with lactone production, although Aox activity on short chains was inversely correlated with lactone accumulation. Due to the poor correlation between Aox activity and lactone production, the modeling of this parameter gave no satisfactory results but growth depending on Aox activity was modeled.     

Effects of a 4-week youth baseball conditioning program on throwing velocity

Effects of a 4-week youth baseball conditioning program on throwing velocity. This study examined the effects of a 4-week youth baseball conditioning program on maximum throwing velocity. Thirty-four youth baseball players (11-15 years of age) were randomly and equally divided into control and training groups. The training group performed 3 sessions (each 75 minutes) weekly for 4 weeks, which comprised a sport specific warm-up, resistance training with elastic tubing, a throwing program, and stretching. Throwing velocity was assessed initially and at the end of the 4-week conditioning program for both control and training groups. The level of significance used was p < 0.05. After the 4-week conditioning program, throwing velocity increased significantly (from 25.1 ± 2.8 to 26.1 ± 2.8 m·s) in the training group but did not significantly increase in the control group (from 24.2 ± 3.6 to 24.0 ± 3.9 m·s). These results demonstrate that the short-term 4-week baseball conditioning program was effective in increasing throwing velocity in youth baseball players. Increased throwing velocity may be helpful for pitchers (less time for hitters to swing) and position players (decreased time for a runner to advance to the next base).     

Modeling <Emphasis Type="Italic">Neisseria meningitidis</Emphasis> metabolism: from genome to metabolic fluxes

Background  

Neisseria meningitidis is a human pathogen that can infect diverse sites within the human host. The major diseases caused by N. meningitidis are responsible for death and disability, especially in young infants. In general, most of the recent work on N. meningitidis focuses on potential antigens and their functions, immunogenicity, and pathogenicity mechanisms. Very little work has been carried out on Neisseria primary metabolism over the past 25 years.     

Simulation of human atherosclerotic femoral plaque tissue: the influence of plaque material model on numerical results

Background

Due to the limited number of experimental studies that mechanically characterise human atherosclerotic plaque tissue from the femoral arteries, a recent trend has emerged in current literature whereby one set of material data based on aortic plaque tissue is employed to numerically represent diseased femoral artery tissue. This study aims to generate novel vessel-appropriate material models for femoral plaque tissue and assess the influence of using material models based on experimental data generated from aortic plaque testing to represent diseased femoral arterial tissue.

Methods

Novel material models based on experimental data generated from testing of atherosclerotic femoral artery tissue are developed and a computational analysis of the revascularisation of a quarter model idealised diseased femoral artery from a 90% diameter stenosis to a 10% diameter stenosis is performed using these novel material models. The simulation is also performed using material models based on experimental data obtained from aortic plaque testing in order to examine the effect of employing vessel appropriate material models versus those currently employed in literature to represent femoral plaque tissue.

Results

Simulations that employ material models based on atherosclerotic aortic tissue exhibit much higher maximum principal stresses within the plaque than simulations that employ material models based on atherosclerotic femoral tissue. Specifically, employing a material model based on calcified aortic tissue, instead of one based on heavily calcified femoral tissue, to represent diseased femoral arterial vessels results in a 487 fold increase in maximum principal stress within the plaque at a depth of 0.8 mm from the lumen.

Conclusions

Large differences are induced on numerical results as a consequence of employing material models based on aortic plaque, in place of material models based on femoral plaque, to represent a diseased femoral vessel. Due to these large discrepancies, future studies should seek to employ vessel-appropriate material models to simulate the response of diseased femoral tissue in order to obtain the most accurate numerical results.