A rapid single-stranded cloning strategy for producing a sequential series of overlapping clones for use in DNA sequencing: application to sequencing the corn mitochondrial 18 S rDNA

A simple new procedure was described for producing a sequential series of overlapping clones for use in DNA sequencing. The technique used single-stranded M13 DNA and complementary DNA oligomers to form specific cleavage and ligation substrates. It was, therefore, independent of the sequence of the DNA cloned into the vector. Deletions of varying sizes were generated from one end of the insert through the 3' to 5' exonuclease activity of T4 DNA polymerase. The approximate size of the deletion and therefore the starting point for DNA sequencing could be estimated by electrophoresis of the subcloned phage DNA on a agarose gel. This greatly reduced the number of templates that must be sequenced to obtain a complete sequence. The entire procedure could be carried out in one tube in less than a day. The procedure was used to subclone and sequence the maize mitochondrial 18 S rDNA and 5' flanking region (2622 bases) in less than a week. Other applications of oligomers and single-stranded DNA in the construction of insertions, deletions, and cDNAs are discussed.     

Amphiphilic cationic peptides mediate cell adhesion to plastic surfaces

Four amphiphilic peptides, each with net charges of +2 or more at neutrality and molecular weights under 4 kilodaltons, were found to mediate the adhesion of normal rat kidney fibroblasts to polystyrene surfaces. Two of these peptides, a model for calcitonin (peptide 1, MCT) and melittin (peptide 2, MEL), form amphiphilic alpha-helical structures at aqueous/nonpolar interfaces. The other two, a luteinizing hormone-releasing hormone model (peptide 3, LHM) and a platelet factor model (peptide 4, MPF) form beta-strand structures in amphiphilic environments. Although it contains only 10 residues, LHM mediated adhesion to surfaces coated with solutions containing as little as 10 pmoles/ml of peptide. All four of these peptides were capable of forming monolayers at air-buffer interfaces with collapse pressures greater than 20 dynes/cm. None of these four peptides contains the tetrapeptide sequence Arg-Gly-Asp-Ser, which has been associated with fibronectin-mediated cell adhesion. Ten polypeptides that also lacked the sequence Arg-Gly-Asp-Ser but were nonamphiphilic and/or had net charges less than +2 at neutrality were all incapable of mediating cell adhesion (Pierschbacher and Ruoslahti, 1984). The morphologies of NRK cells spread on polystyrene coated with peptide LHM resemble the morphologies on fibronectin-coated surfaces, whereas cells spread on surfaces coated with MCT or MEL exhibit strikingly different morphologies. The adhesiveness of MCT, MEL, LHM, and MPF implies that many amphiphilic cationic peptides could prove useful as well defined adhesive substrata for cell culture and for studies of the mechanism of cell adhesion.     

A para-nitrophenol phosphonate probe labels distinct serine hydrolases of Arabidopsis

Activity-based protein profiling represents a powerful methodology to probe the activity state of enzymes under various physiological conditions. Here we present the development of a para-nitrophenol phosphonate activity-based probe with structural similarities to the potent agrochemical paraoxon. We demonstrate that this probes labels distinct serine hydrolases with the carboxylesterase CXE12 as the predominant target in Arabidopsis thaliana. The designed probe features a distinct labeling pattern and therefore represents a promising chemical tool to investigate physiological roles of selected serine hydrolases such as CXE12 in plant biology.     

Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅     

Seasonal and annual variability in the phytoplankton community of the Raunefjord,west coast of Norway from 2001–2006

Changes in phytoplankton community composition potentially affect the entire marine food web. Because of seasonal cycles and inter-annual variations in species composition, long-term monitoring, covering many sequential years, is required to establish a baseline study and to reveal long-term trends. The current study describes the phytoplankton biomass variations and species composition in relation to hydrographic and meteorological conditions in the Raunefjord, western Norway, over a 6-year period from 2001 to 2006. The extent of inflow or upwelling in the fjord varied from year to year and resulted in pronounced differences in water column stability. The annual phytoplankton community succession showed some repeated seasonal patterns, but also high variability between years. Two to four diatom blooms were observed per year, and the spring blooms occurring before water column stratification in March were dominated by Skeletonema marinoi and Chaetoceros socialis, and other Chaetoceros and Thalassiosira spp. Blooms of the haptophytes Phaeocystis pouchetii and Emiliania huxleyi were irregular and in some years totally absent. Although E. huxleyi was present all year round it appeared in bloom concentrations only in 2003, when the summer was warm and the water column characterized by high surface temperatures and pronounced stratification. The annual average abundance of both diatoms and flagellates increased during the six years. Despite the high variation from year to year, our investigation provides valuable knowledge about annual phytoplankton community patterns in the region, and can be used as a reference to detect possible future changes.     

Lineage analysis of the olfactory epithelium using a replication-incompetent retrovirus

We have analysed the lineage of olfactory receptor neurons usinga replication-incompetent retrovirus injected beneath the olfactoryepithelium of young rats. There are two major types of clustersof infected cells seen at 5–40 days after infection: (i)horizontal basal cells (HBCs); (ii) variable numbers of globosebasal cells (GBCs), and immature and mature sensory neurons.Olfactory nerve lesion increased the frequency of the globose/sensoryneuron clusters, as well as the number of cells/cluster, butdid not change the number of HBC clusters or cells/cluster.No clusters contained sustentacular cells. These data indicatethat, at least in young rats: (i) HBCs are not precursors ofolfactory neurons; (ii) there is a lineage path from GBCs tomature neurons; and (iii) sustentacular cells arise from a separatelineage.     

Fine mapping of the chicken salmonellosis resistance locus (SAL1)

Salmonella enterica serovar Typhimurium is a Gram-negative bacterium that has a significant impact on both human and animal health. It is one of the most common food-borne pathogens responsible for a self-limiting gastroenteritis in humans and a similar disease in pigs, cattle and chickens. In contrast, intravenous challenge with S. Typhimurium provides a valuable model for systemic infection, often causing a typhoid-like infection, with bacterial replication resulting in the destruction of the spleen and liver of infected animals. Resistance to systemic salmonellosis in chickens is partly genetically determined, with bacterial numbers at systemic sites in resistant lines being up to 1000-fold fewer than in susceptible lines. Identification of genes contributing to disease resistance will enable genetic selection of resistant lines that will reduce Salmonella levels in poultry flocks. We previously identified a novel resistance locus on Chromosome 5, designated SAL1 . Through the availability of high-density SNP panels in the chicken, combined with advanced back-crossing of the resistant and susceptible lines, we sought to refine the SAL1 locus and identify potential positional candidate genes. Using a 6^th generation backcross mapping population, we have confirmed and refined the SAL1 locus as lying between 54.0 and 54.8 Mb on the long arm of Chromosome 5 ( F  = 8.72, P  = 0.00475). This region spans 14 genes, including two very striking functional candidates; CD27-binding protein ( Siva ) and the RAC -alpha serine/threonine protein kinase homolog , AKT1 ( protein kinase B , PKB ).