Suppression of ATP in Candida albicans by imidazole and derivative antifungal agents

Several antifungal agents, at concentrations of 10 micrograms/ml, were shown to suppress ATP concentrations very rapidly in intact cells and spheroplasts of Candida albicans. The highest ATP-suppressing activity was shown by the highly lipophilic imidazole derivatives difonazole, clotrimazole, econazole, isoconazole, miconazole, oxiconazole and tioconazole, which all caused a reduction of cellular ATP content of more than 50% in 10 min. Relatively hydrophilic imidazole derivatives such as ketoconazole were essentially inactive in the test, as were the triazole derivatives fluconazole, ICI 153066, itraconazole and terconazole, and 5-fluorocytosine. Amphotericin B and terbinafine possessed intermediate ATP-suppressing activity, and the dose-response and pH-response curves for these compounds suggested their mechanism of ATP suppression differed from that of the active imidazole derivatives. ATP suppression by azole antifungals did not involve leakage of ATP from the cells and the effect was entirely abrogated by the presence of serum. Intact cells and spheroplasts of yeast-form and hyphal-form C. albicans were generally equally sensitive to ATP suppression, but stationary-phase cells of both morphological forms were less sensitive than exponential-phase cells. The extent of ATP suppression was significantly reduced in stationary-phase yeast cells of a C. albicans strain with known resistance to azole antifungals, but exponential-phase cells of resistant and susceptible strains were equally sensitive. The effect is tentatively ascribed to membrane damage caused directly by the antifungals.     

Automated Entire Thrombus Density Measurements for Robust and Comprehensive Thrombus Characterization in Patients with Acute Ischemic Stroke

Background and Purpose

In acute ischemic stroke (AIS) management, CT-based thrombus density has been associated with treatment success. However, currently used thrombus measurements are prone to inter-observer variability and oversimplify the heterogeneous thrombus composition. Our aim was first to introduce an automated method to assess the entire thrombus density and then to compare the measured entire thrombus density with respect to current standard manual measurements.

Materials and Method

In 135 AIS patients, the density distribution of the entire thrombus was determined. Density distributions were described using medians, interquartile ranges (IQR), kurtosis, and skewedness. Differences between the median of entire thrombus measurements and commonly applied manual measurements using 3 regions of interest were determined using linear regression.

Results

Density distributions varied considerably with medians ranging from 20.0 to 62.8 HU and IQRs ranging from 9.3 to 55.8 HU. The average median of the thrombus density distributions (43.5 ± 10.2 HU) was lower than the manual assessment (49.6 ± 8.0 HU) (p<0.05). The difference between manual measurements and median density of entire thrombus decreased with increasing density (r = 0.64; p<0.05), revealing relatively higher manual measurements for low density thrombi such that manual density measurement tend overestimates the real thrombus density.

Conclusions

Automatic measurements of the full thrombus expose a wide variety of thrombi density distribution, which is not grasped with currently used manual measurement. Furthermore, discrimination of low and high density thrombi is improved with the automated method.     

Leaf vein fraction influences the Péclet effect and 18O enrichment in leaf water

The process of evaporation results in the fractionation of water isotopes such that the lighter ¹⁶O isotope preferentially escapes the gas phase leaving the heavier ¹⁸O isotope to accumulate at the sites of evaporation. This applies to transpiration from a leaf with the degree of fractionation dependent on a number of environmental and physiological factors that are well understood. Nevertheless, the ¹⁸O enrichment of bulk leaf water is often less than that predicted for the sites of evaporation. The advection of less enriched water in the transpiration stream has been suggested to limit the back diffusion of enriched evaporative site water (Péclet effect); however, evidence for this effect has been varied. In sampling across a range of species with different vein densities and saturated water contents, we demonstrate the importance of accounting for the relative ‘pool’ sizes of the vascular and mesophyll water for the interpretation of a Péclet effect. Further, we provide strong evidence for a Péclet signal within the xylem that if unaccounted for can lead to confounding of the estimated enrichment within the mesophyll water. This has important implications for understanding variation in the effective path length of the mesophyll and hence potentially the δ¹⁸O of organic matter.     

Structural and spectroscopic characterization of P450 BM3 mutants with unprecedented P450 heme iron ligand sets. New heme ligation states influence conformational equilibria in P450 BM3

Two novel P450 heme iron ligand sets were generated by directed mutagenesis of the flavocytochrome P450 BM3 heme domain. The A264H and A264K variants produce Cys-Fe-His and Cys-Fe-Lys axial ligand sets, which were validated structurally and characterized by spectroscopic analysis. EPR and magnetic circular dichroism (MCD) provided fingerprints defining these P450 ligand sets. Near IR MCD spectra identified ferric low spin charge-transfer bands diagnostic of the novel ligands. For the A264K mutant, this is the first report of a Cys-Fe-Lys near-IR MCD band. Crystal structure determination showed that substrate-free A264H and A264K proteins crystallize in distinct conformations, as observed previously in substrate-free and fatty acid-bound wild-type P450 forms, respectively. This, in turn, likely reflects the positioning of the I alpha helix section of the protein that is required for optimal configuration of the ligands to the heme iron. One of the monomers in the asymmetric unit of the A264H crystals was in a novel conformation with a more open substrate access route to the active site. The same species was isolated for the wildtype heme domain and represents a novel conformational state of BM3 (termed SF2). The "locking" of these distinct conformations is evident from the fact that the endogenous ligands cannot be displaced by substrate or exogenous ligands. The consequent reduction of heme domain conformational heterogeneity will be important in attempts to determine atomic structure of the full-length, multidomain flavocytochrome, and thus to understand in atomic detail interactions between its heme and reductase domains.     

Y25S variant of Paracoccus pantotrophus cytochrome cd1 provides insight into anion binding by d1 heme and a rare example of a critical difference between solution and crystal structures

Tyr25 is a ligand to the active site d1 heme in as isolated, oxidized cytochrome cd1 nitrite reductase from Paracoccus pantotrophus. This form of the enzyme requires reductive activation, a process that involves not only displacement of Tyr25 from the d1 heme but also switching of the ligands at the c heme from bis-histidinyl to His/Met. A Y25S variant retains this bis-histidinyl coordination in the crystal of the oxidized state that has sulfate bound to the d1 heme iron. This Y25S form of the enzyme does not require reductive activation, an observation previously interpreted as meaning that the presence of the phenolate oxygen of Tyr25 is the critical determinant of the requirement for activation. This interpretation now needs re-evaluation because, unexpectedly, the oxidized as prepared Y25S protein, unlike the wild type, has different heme iron ligands in solution at room temperature, as judged by magnetic circular dichroism and electron spin resonance spectroscopies, than in the crystal. In addition, the binding of nitrite and cyanide to oxidized Y25S cytochrome cd1 is markedly different from the wild type enzyme, thus providing insight into the affinity of the oxidized d1 heme ring for anions in the absence of the steric barrier presented by Tyr25.     

Eucomis zambesiaca baker: Factors affecting in vitro bulblet induction

Eucomis species having considerable horticultural potential are used in African traditional medicine to treat various ailments. The effects of environmental and physiological parameters on the initiation and growth of bulblets using leaf explants were investigated. These included the effect of temperature (10, 15, 20, 25 and 30 °C), photoperiod (8 h light, 16 h light, continuous light and continuous dark), carbohydrates (sucrose, fructose and glucose) at different concentrations and combinations as well as various plant growth regulators; gibberellic acid (GA₃), indole-3-butyric acid (IBA), napthaleneacetic acid (NAA), N⁶-benzyladenine (BA), zeatin and others. Liquid shake and liquid static cultures versus solid cultures were investigated. Maximum number of bulblets per leaf explant was obtained at 20 °C, with an average of 3 bulbs per leaf explants and a bulblet mass of 57 mg. An 8 h light cycle produced 1.38 bulbs per leaf explant, at a mass of 42 mg. Fructose at 3% produced an average of 1.18 bulbs per leaf explant, 3.39 mm wide and weighing 56.6 mg. Of the plant growth regulators, 4.90 µM IBA was found to be the optimum treatment for bulblet induction, with an average bulb diameter of 4.36 mm and a mean bulblet mass of 79.07 mg. Liquid shake cultures exhibited poor growth while bulblet, leaf and root growth was improved in liquid static cultures. Successful micropropagation from leaf explants established that leaf explants can be used as an alternative explant source to bulbs. This protocol allows for the fast and economic mass propagation of Eucomis plants.     

The enzymatic basis for pesticide bioremediation

Enzymes are central to the biology of many pesticides, influencing their modes of action, environmental fates and mechanisms of target species resistance. Since the introduction of synthetic xenobiotic pesticides, enzymes responsible for pesticide turnover have evolved rapidly, in both the target organisms and incidentally exposed biota. Such enzymes are a source of significant biotechnological potential and form the basis of several bioremediation strategies intended to reduce the environmental impacts of pesticide residues. This review describes examples of enzymes possessing the major activities employed in the bioremediation of pesticide residues, and some of the strategies by which they are employed. In addition, several examples of specific achievements in enzyme engineering are considered, highlighting the growing trend in tailoring enzymatic activity to a specific biotechnologically relevant function.     

Redox and Chemical Activities of the Hemes in the Sulfur Oxidation Pathway Enzyme SoxAX

SoxAX enzymes couple disulfide bond formation to the reduction of cytochrome c in the first step of the phylogenetically widespread Sox microbial sulfur oxidation pathway. Rhodovulum sulfidophilum SoxAX contains three hemes. An electrochemical cell compatible with magnetic circular dichroism at near infrared wavelengths has been developed to resolve redox and chemical properties of the SoxAX hemes. In combination with potentiometric titrations monitored by electronic absorbance and EPR, this method defines midpoint potentials (E_m) at pH 7.0 of approximately +210, −340, and −400 mV for the His/Met, His/Cys⁻, and active site His/CysS⁻-ligated heme, respectively. Exposing SoxAX to S₂O₄²⁻, a substrate analog with E_m ∼−450 mV, but not Eu(II) complexed with diethylene triamine pentaacetic acid (E_m ∼−1140 mV), allows cyanide to displace the cysteine persulfide (CysS⁻) ligand to the active site heme. This provides the first evidence for the dissociation of CysS⁻ that has been proposed as a key event in SoxAX catalysis.