Biocoagulation of dairy wastewater by Lactobacillus casei TISTR 1500 for protein recovery using micro-aerobic sequencing batch reactor (micro-aerobic SBR)

This study investigated biocoagulation of dairy process wastewater with a new system of the micro-aerobic sequencing batch reactor (micro-aerobic SBR) at a batch bench scale. Lactobacillus casei TISTR 1500 was inoculated to produce acid coagulants under non-sterile acid conditions. Colloidal proteins were removed by employing a solid–liquid separation step as a pre-treatment. The micro-aerobic SBR process had the efficiencies of organic reduction with 73.6 ± 5.9%, 90.1 ± 1.3%, and 85.7 ± 0.6% of chemical oxygen demand (COD), proteins, and sugars without adding external coagulant, and flocculant, respectively. Sustained acid fermentation was achieved for at least 150 cycles by applying an indigenous fill-react-settle-draw-idle sequence in the micro-aerobic SBR process and the use of different solid retention times at 3, 6, 9, 12 and 15 d, consecutively. The micro-aerobic SBR system was able to support lactic acid bacteria (LAB) growth with long SRT (12 and 15 d), due to at least 3 factors: the large inoculum size employed, relatively high concentration of lactic acid produced, and the change in pH during the restoring stage. Current process offered a possible alternative to the more costly chemical and other biological pre-treatments.     

A mathematical model for Zika virus transmission dynamics with a time-dependent mosquito biting rate

Background

Mathematical modeling has become a tool used to address many emerging diseases. One of the most basic and popular modeling frameworks is the compartmental model. Unfortunately, most of the available compartmental models developed for Zika virus (ZIKV) transmission were designed to describe and reconstruct only past, short-time ZIKV outbreaks in which the effects of seasonal change to entomological parameters can be ignored. To make an accurate long-term prediction of ZIKV transmission, the inclusion of seasonal effects into an epidemic model is unavoidable.

Methods

We developed a vector-borne compartmental model to analyze the spread of the ZIKV during the 2015–2016 outbreaks in Bahia, Brazil and to investigate the impact of two vector control strategies, namely, reducing mosquito biting rates and reducing mosquito population size. The model considered the influences of seasonal change on the ZIKV transmission dynamics via the time-varying mosquito biting rate. The model was also validated by comparing the model prediction with reported data that were not used to calibrate the model.

Results

We found that the model can give a very good fit between the simulation results and the reported Zika cases in Bahia (R-square?=?0.9989). At the end of 2016, the total number of ZIKV infected people was predicted to be 1.2087 million. The model also predicted that there would not be a large outbreak from May 2016 to December 2016 due to the decrease of the susceptible pool. Implementing disease mitigation by reducing the mosquito biting rates was found to be more effective than reducing the mosquito population size. Finally, the correlation between the time series of estimated mosquito biting rates and the average temperature was also suggested.

Conclusions

The proposed ZIKV transmission model together with the estimated weekly biting rates can reconstruct the past long-time multi-peak ZIKV outbreaks in Bahia.

     

Optimization of cellulase-free xylanase production by thermophilic Streptomyces thermovulgaris TISTR1948 through Plackett-Burman and response surface methodological approaches

Cellulase-free xylanase production by thermophilic Streptomyces thermovulgaris TISTR1948 was cultivated in a basal medium with rice straw as sole source of carbon and as an inducible substrate. Variable medium components were selected in accordance with the Plackett-Burman experimental design. The optimization conditions of physical factors (pH and temperature levels) were then combined in further studies through the response surface methodology approach. Only two significant components, rice straw and yeast extract, were chosen for the optimization studies. A second-order quadratic model was constructed by central composite design (CCD). The model revealed that both pH and temperature levels were significant, and were dependent on xylanase production. Under these experimental designs, the xylanase yield increased from 51.11 to 274.49 U/mL (3,400 to 10,000 U/g of rice straw) or about 537% higher than an unoptimized basal medium. The optimum conditions to achieve maximum yield of xylanase were 27.45 g/L of rice straw and 5.42 g/L of yeast extract under relatively neutral conditions of pH 7.11, 50.03 °C, and a incubation period.     

The Delay in the Development of Experimental Colitis from Isomaltosyloligosaccharides in Rats Is Dependent on the Degree of Polymerization

Background

Isomaltosyloligosaccharides (IMO) and dextran (Dex) are hardly digestible in the small intestine and thus influence the luminal environment and affect the maintenance of health. There is wide variation in the degree of polymerization (DP) in Dex and IMO (short-sized IMO, S-IMO; long-sized IMO, L-IMO), and the physiological influence of these compounds may be dependent on their DP.

Methodology/Principal Findings

Five-week-old male Wistar rats were given a semi-purified diet with or without 30 g/kg diet of the S-IMO (DP = 3.3), L-IMO (DP = 8.4), or Dex (DP = 1230) for two weeks. Dextran sulfate sodium (DSS) was administered to the rats for one week to induce experimental colitis. We evaluated the clinical symptoms during the DSS treatment period by scoring the body weight loss, stool consistency, and rectal bleeding. The development of colitis induced by DSS was delayed in the rats fed S-IMO and Dex diets. The DSS treatment promoted an accumulation of neutrophils in the colonic mucosa in the rats fed the control, S-IMO, and L-IMO diets, as assessed by a measurement of myeloperoxidase (MPO) activity. In contrast, no increase in MPO activity was observed in the Dex-diet-fed rats even with DSS treatment. Immune cell populations in peripheral blood were also modified by the DP of ingested saccharides. Dietary S-IMO increased the concentration of n-butyric acid in the cecal contents and the levels of glucagon-like peptide-2 in the colonic mucosa.

Conclusion/Significance

Our study provided evidence that the physiological effects of α-glucosaccharides on colitis depend on their DP, linkage type, and digestibility.     

The effects of geographical distributions of buildings and roads on the spatiotemporal spread of canine rabies: An individual-based modeling study

Rabies is a fatal disease that has been a serious health concern, especially in developing countries. Although rabies is preventable by vaccination, the spread still occurs sporadically in many countries, including Thailand. Geographical structures, habitats, and behaviors of host populations are essential factors that may result in an enormous impact on the mechanism of propagation and persistence of the disease. To investigate the role of geographical structures on the transmission dynamics of canine rabies, we developed a stochastic individual-based model that integrates the exact configuration of buildings and roads. In our model, the spatial distribution of dogs was estimated based on the distribution of buildings, with roads considered to facilitate dog movement. Two contrasting areas with high- and low-risk of rabies transmission in Thailand, namely, Hatyai and Tepha districts, were chosen as study sites. Our modeling results indicated that the distinct geographical structures of buildings and roads in Hatyai and Tepha could contribute to the difference in the rabies transmission dynamics in these two areas. The high density of buildings and roads in Hatyai could facilitate more rabies transmission. We also investigated the impacts of rabies intervention, including reducing the dog population, restricting owned dog movement, and dog vaccination on the spread of canine rabies in these two areas. We found that reducing the dog population alone might not be sufficient for preventing rabies transmission in the high-risk area. Owned dog confinement could reduce more the likelihood of rabies transmission. Finally, a higher vaccination coverage may be required for controlling rabies transmission in the high-risk area compared to the low-risk area.     

Optimization of exopolysaccharide overproduction by Lactobacillus confusus in solid state fermentation under high salinity stress

It is believed that high concentrations of sodium chloride (NaCl) suppress the biosynthesis of exopolysaccharide (EPS) in lactic acid bacteria (LAB). Nevertheless, overproduction of EPSs due to high salinity stress in solid state fermentation performed on an agar surface was demonstrated in this study using a response surface methodology via a central composite design (CCD). Under optimized conditions with NaCl 4.97% and sucrose 136.5 g/L at 40.79 h of incubation, the EPS yield was 259% (86.36 g/L of EPS), higher than the maximum yield produced with the modified MRS medium containing only 120 g/L of sucrose without NaCl (33.4 g/L of EPS). Biosynthesis of EPS by Lactobacillus confusus TISTR 1498 was independent of biomass production. Our results indicated that high salinity stress can enhance EPS production in solid state fermentation.     

Influence of food colorant and initial COD concentration on the efficiencies of micro-aerobic sequencing batch reactor (micro-aerobic SBR) for casein recovery under non-sterile condition by Lactobacillus casei TISTR 1500

The acid biocoagulants produced from non-sterile lactic acid fermentation by Lactobacillus casei TISTR 1500 were used to settle colloidal protein, mainly casein, at the isoelectric point in dairy effluent prior to secondary treatment. High concentration of azo dye (Ponceau 4R) in the dairy wastewater and the stress of starvation decreased the efficiencies of the micro-aerobic SBR. Consequently, low casein recovery obtained and organic removal suffered a decline. The number of lactic acid bacteria (LAB) also declined from log 7.4 to log 5.30 in the system fed with 400 mg L⁻¹ of the dye containing wastewater. The recovery of the system, however, showed that 25,000 mg COD L⁻¹ influent with 200 mg L⁻¹ of the dye maintained the growth of LAB in the range of log 7.74–8.12, with lactic and acetic production (2597 and 197 mg L⁻¹) and 83% protein removal. The results in this study suggested that the inhibitory effects were compensated with high organic content feeding.     

Treatability of cheese whey for single-cell protein production in nonsterile systems: Part I. Optimal condition for lactic acid fermentation using a microaerobic sequencing batch reactor (microaerobic SBR) with immobilized Lactobacillus plantarum TISTR 2265 and microbial communities

Cheese whey contains a high organic content and causes serious problems if it is released into the environment when untreated. This study aimed to investigate the optimum condition of lactic acid production using the microaerobic sequencing batch reactor (microaerobic SBR) in a nonsterile system. The high production of lactic acid was achieved by immobilized Lactobacillus plantarum TISTR 2265 to generate an acidic pH condition below 4.5 and then to support single-cell protein (SCP) production in the second aerobic sequencing batch reactor (aerobic SBR). A hydraulic retention time (HRT) of 4 days and a whey concentration of 80% feeding gave a high lactic acid yield of 12.58 g/L, chemical oxygen demand (COD) removal of 62.38%, and lactose utilization of 61.54%. The microbial communities in the nonsterile system were dominated by members of lactic acid bacteria, and it was shown that the inoculum remained in the system up to 330 days.     

Treatability of cheese whey for single-cell protein production in nonsterile systems: Part II. The application of aerobic sequencing batch reactor (aerobic SBR) to produce high biomass of Dioszegia sp. TISTR 5792

This study aimed to investigate the efficiency of an aerobic sequencing batch reactor (aerobic SBR) in a nonsterile system using the application of an experimental design via central composite design (CCD). The acidic whey obtained from lactic acid fermentation by immobilized Lactobacillus plantarum sp. TISTR 2265 was fed into the bioreactor of the aerobic SBR in an appropriate ratio between acidic whey and cheese whey to produce an acidic environment below 4.5 and then was used to support the growth of Dioszegia sp. TISTR 5792 by inhibiting bacterial contamination. At the optimal condition for a high yield of biomass production, the system was run with a hydraulic retention time (HRT) of 4 days, a solid retention time (SRT) of 8.22 days, and an acidic whey concentration of 80% feeding. The chemical oxygen demand (COD) decreased from 25,230 mg/L to 6,928 mg/L, which represented a COD removal of 72.15%. The yield of biomass production and lactose utilization by Dioszegia sp. TISTR 5792 were 13.14 g/L and 33.36%, respectively, with a long run of up to 180 cycles and the pH values of effluent were rose up to 8.32 without any pH adjustment.     

Direct bioconversion of rice residue from canteen waste into lipids by new amylolytic oleaginous yeast Sporidiobolus pararoseus KX709872

The new amylolytic oleaginous red yeast, Sporidiobolus pararoseus KX709872, produced both α-amylase (540?±?0.09?mU/mL) and amyloglucosidase (23?±?0.00?mU/mL) and showed good ability to directly convert rice residue from canteen waste to biomass and lipids. Effects of medium composition and cultivation conditions on growth and lipid accumulation for strain KX709872 were investigated under shaking flask and upscaling levels. At C?:?N ratio of 25?:?1, pH 5.45, 22.36°C, and 199.40?rpm for 7 days, volumetric production of biomass and lipids, lipid content, and lipid productivity reached 17.69?±?0.44, 8.35?±?0.19?g/L, 49.48?±?0.41% (w/w), and 1.67?±?0.11?g/L/day, respectively. Production of lipids was also implemented in 5.0-L stirred tank bioreactor with 2.5?L of optimized medium at 300?rpm and 3.0 vvm for 5 days. Volumetric production of biomass and lipids, lipid content, and lipid productivity were 16.33?±?0.49, 8.75?±?0.13?g/L, 56.61?±?0.04% (w/w), and 2.19?±?0.03?g/L/day, respectively. Meanwhile, the fatty acids of lipids from strain KX709872 had high oleic acid content (60?62%) which was similar to those of vegetable oils, indicating that these lipids are promising as an alternative biodiesel feedstock. Moreover, the biodiesel derived from lipids of strain KX709872 had properties satisfying the criteria of ASTM D6751 and EN 14214 standards.