Structural analysis of polymers of sickle cell hemoglobin. III. Fibers within fascicles

We have examined the structure of hemoglobin S fibers, which are associated into large bundles, or fascicles. Electron micrographs of embedded and cross-sectioned fascicles provide an end-on view of the component fibers. The cross-sectional images are rotationally blurred as a result of the twist of the fiber within the finite thickness of the section. We have applied restoration techniques to recover a deblurred image of the fiber. The first step in this procedure involved correlation averaging images of cross-sections of individual fibers in order to improve the signal-to-noise ratio. The rotationally blurred image was then geometrically transformed to polar co-ordinates. In this space, the rotational blur is transformed into a linear blur. The linearly blurred image is the convolution of the unblurred image and a point spread function that can be closely approximated by a square pulse. Deconvolution in Fourier space, followed by remapping to Cartesian co-ordinates, produced a deblurred image of the original micrograph. The deblurred images indicate that the fiber is comprised of 14 strands of hemoglobin S. This result provides confirmation of the fiber structure determined using helical reconstruction techniques and indicates that the association of fibers into ordered arrays does not alter their molecular structure.     

Utilization of milk energy by suckling mink kits

A total of 36 mink dams and their litters of 3, 6 or 9 kits were used for determination of milk intake of the suckling young by means of deuterium dilution technique, and chemical composition of milk and of kit bodies. Measurements were performed during lactation weeks 1?–?4, each week with 3 dams with each litter size. Milk intake was determined over a 48?h measurement period, and by the end of this milk samples were collected and 2 kits (litters of 6 and 9) or 1 kit per litter (litters of 3) were killed for body chemical composition. Based on the results, different models were applied for calculation of the energetic efficiency of milk. Dam milk yield increased steadily from week 1 until week 3 but only slightly from week 3 to 4. The increase declined with increasing litter size, and for dams suckling 9 kits the increment from week 3 to week 4 was only 2?g. The dry matter content of milk increased significantly as lactation progressed, being reflected in crude protein increasing from 6.9% in lactation week 1 to 8.1% in week 4. Milk fat increased concomitantly from 5.6% to 8.0%. In kit bodies, crude protein content increased from 9.4% in week 1 to about 12% in weeks 3 and 4. Body fat content increased from week 1 (4.1%) to week 3 (8.4%) and then declined in week 4 (7.1%). Animals suckled in litters of 3 kits had the highest milk intake and live weight and kits suckled in litters of 9 had the lowest milk intake, live weight and daily gain. In terms of milk intake per g gain kits in litters of 6 were the most efficient, with 4.1?g milk per g body gain. The metabolizable energy requirement for maintenance (MEm) was estimated to 448 kJ/kg^0.75 and the efficiency of utilization of ME for body gain (k_g) to 0.67, the estimates being higher (MEm) or in good agreement with previous findings (k_g) in suckling mink kits.     

Improving the positional accuracy of the goniometer on the Philips CM series TEM

We have developed a method to improve the accuracy for absolute relocation of a target specimen using the goniometer on a Philips transmission electron microscope. We have achieved this by characterizing the performance of the Philips compustage, modeling its behavior, and using this model to calculate the goniometer movements required for accurate target relocation. This resulted in a 10-fold improvement in the positioning accuracy of the goniometer.     

Automated image acquisition for single-particle reconstruction using p97 as the biological sample

We have used Leginon, a fully automatic system capable of acquiring cryo-electron micrographs, to collect data of single particles, specifically of the AAA ATPase p97. The images were acquired under low-dose conditions and required no operator intervention other than the initial setup and periodic refilling of the cold-stage dewar. Each image was acquired at two different defocus values. Two-dimensional projection maps of p97 were calculated from these data and compared to results previously obtained using the conventional manual data collection methods to film. The results demonstrate that Leginon performs as well as an experienced microscopist for the acquisition of single-particle data. The general advantages of automation are discussed.     

Does contamination buildup limit throughput for automated cryoEM?

The development of automated systems for data acquisition in cryo electron microscopy has enabled the possibility of acquiring very large number of images from a single specimen grid. We have demonstrated that over images of 250,000 single particles can be acquired in a 24 h period. This has raised questions as to whether contamination buildup on the specimen limits the quality of the data that can be acquired during these long duration experiments and also whether the data acquisition session could be extended to allow acquisition of more than 1,000,000 particles. We report here a systematic characterization of contamination of specimens maintained for long periods of time at liquid nitrogen temperatures using standard side entry cryo stages. As part of this characterization we developed a more reliable method for accurately estimating specimen ice thickness. Using the method, we were able to calibrate image contrast against ice thickness under a variety of magnifications, objective aperture positions, and defoci, and demonstrated the strong dependence of the calibration curve on these parameters. The results show the anti-contamination aperture is, as expected, critical to the prevention of contamination and that loading film into the microscope dramatically increases the contamination rate, particularly in the first 3 h after the insertion of the film box. In the absence of film, we were able to reproducibly demonstrate that the contamination rate can be limited to a rate of approximately 1 angstrom/h providing reassurance that contamination will not be a major limiting factor for long term cryoEM experiments if a CCD camera is used for the imaging.     

Toolbox for non-intrusive structural and functional analysis of recombinant VLP based vaccines: a case study with hepatitis B vaccine

Background

Fundamental to vaccine development, manufacturing consistency, and product stability is an understanding of the vaccine structure-activity relationship. With the virus-like particle (VLP) approach for recombinant vaccines gaining popularity, there is growing demand for tools that define their key characteristics. We assessed a suite of non-intrusive VLP epitope structure and function characterization tools by application to the Hepatitis B surface antigen (rHBsAg) VLP-based vaccine.

Methodology

The epitope-specific immune reactivity of rHBsAg epitopes to a given monoclonal antibody was monitored by surface plasmon resonance (SPR) and quantitatively analyzed on rHBsAg VLPs in-solution or bound to adjuvant with a competitive enzyme-linked immunosorbent assay (ELISA). The structure of recombinant rHBsAg particles was examined by cryo transmission electron microscopy (cryoTEM) and in-solution atomic force microscopy (AFM).

Principal Findings

SPR and competitive ELISA determined relative antigenicity in solution, in real time, with rapid turn-around, and without the need of dissolving the particulate aluminum based adjuvant. These methods demonstrated the nature of the clinically relevant epitopes of HBsAg as being responsive to heat and/or redox treatment. In-solution AFM and cryoTEM determined vaccine particle size distribution, shape, and morphology. Redox-treated rHBsAg enabled 3D reconstruction from CryoTEM images – confirming the previously proposed octahedral structure and the established lipid-to-protein ratio of HBsAg particles. Results from these non-intrusive biophysical and immunochemical analyses coalesced into a comprehensive understanding of rHBsAg vaccine epitope structure and function that was important for assuring the desired epitope formation, determinants for vaccine potency, and particle stability during vaccine design, development, and manufacturing.

Significance

Together, the methods presented here comprise a novel suite of non-intrusive VLP structural and functional characterization tools for recombinant vaccines. Key VLP structural features were defined and epitope-specific antigenicity was quantified while preserving epitope integrity and particle morphology. These tools should facilitate the development of other VLP-based vaccines.     

Engineered mutations change the structure and stability of a virus-like particle

The single-coat protein (CP) of bacteriophage Qβ self-assembles into T = 3 icosahedral virus-like particles (VLPs), of interest for a wide range of applications. These VLPs are very stable, but identification of the specific molecular determinants of this stability is lacking. To investigate these determinants along with manipulations that confer more capabilities to our VLP material, we manipulated the CP primary structure to test the importance of various putative stabilizing interactions. Optimization of a procedure to incorporate fused CP subunits allowed for good control over the average number of covalent dimers in each VLP. We confirmed that the disulfide linkages are the most important stabilizing elements for the capsid and that acidic conditions significantly enhance the resistance of VLPs to thermal degradation. Interdimer interactions were found to be less important for VLP assembly than intradimer interactions. Finally, a single point mutation in the CP resulted in a population of smaller VLPs in three distinct structural forms.     

Nucleotide-dependent conformational changes in the N-Ethylmaleimide Sensitive Factor (NSF) and their potential role in SNARE complex disassembly

Homohexameric, N-Ethylmaleimide Sensitive Factor (NSF) disassembles Soluble NSF Attachment Protein Receptor (SNARE) complexes after membrane fusion, an essential step in vesicular trafficking. NSF contains three domains (NSF-N, NSF-D1, and NSF-D2), each contributing to activity. We combined electron microscopic (EM) analysis, analytical ultracentrifugation (AU) and functional mutagenesis to visualize NSF's ATPase cycle. 3D density maps show that NSF-D2 remains stable, whereas NSF-N undergoes large conformational changes. NSF-Ns splay out perpendicular to the ADP-bound hexamer and twist upwards upon ATP binding, producing a more compact structure. These conformations were confirmed by hydrodynamic, AU measurements: NSF-ATP sediments faster with a lower frictional ratio (f/f(0)). Hydrodynamic analyses of NSF mutants, with specific functional defects, define the structures underlying these conformational changes. Mapping mutations onto our 3D models allows interpretation of the domain movement and suggests a mechanism for NSF binding to and disassembly of SNARE complexes.