Oligomeric State and Thermal Stability of Apo- and Holo- Human Ornithine δ-Aminotransferase

Human ornithine δ-aminotransferase (hOAT) (EC 2.6.1.13) is a mitochondrial pyridoxal 5′-phosphate (PLP)-dependent aminotransferase whose deficit is associated with gyrate atrophy, a rare autosomal recessive disorder causing progressive blindness and chorioretinal degeneration. Here, both the apo- and holo-form of recombinant hOAT were characterized by means of spectroscopic, kinetic, chromatographic and computational techniques. The results indicate that apo and holo-hOAT (a) show a similar tertiary structure, even if apo displays a more pronounced exposure of hydrophobic patches, (b) exhibit a tetrameric structure with a tetramer-dimer equilibrium dissociation constant about fivefold higher for the apoform with respect to the holoform, and (c) have apparent T_m values of 46 and 67?°C, respectively. Moreover, unlike holo-hOAT, apo-hOAT is prone to unfolding and aggregation under physiological conditions. We also identified Arg217 as an important hot-spot at the dimer–dimer interface of hOAT and demonstrated that the artificial dimeric variant R217A exhibits spectroscopic properties, T_m values and catalytic features similar to those of the tetrameric species. This finding indicates that the catalytic unit of hOAT is the dimer. However, under physiological conditions the apo-tetramer is slightly less prone to unfolding and aggregation than the apo-dimer. The possible implications of the data for the intracellular stability and regulation of hOAT are discussed.     

Putrescine Channels in the Plasma Membrane of Arabidopsis thaliana

The patch-clamp technique was used in the whole-cell configuration to study plasma membrane channels permeable to the diamine putrescine in protoplasts isolated from cultured cells of Arabidopsis thaliana L. Under our experimental conditions, no channels selectively mediating putrescine influx were observed. Inward K+ channels showed a low permeability to putrescine, the permeability ratio of putrescine relative to K+ being around 0.1. Further characterization of the previously identified outward channels mediating putrescine efflux (R. Colombo, R. Cerana, N. Bagni [1992] Biochem Biophys Res Commun 182: 1187-1192) indicated that their activity was regulated by the overall ion concentration of the external medium.     

In vitro biocompatibility evaluation of a heat‐resistant 3D printing material for use in customized cell culture devices

Additive manufacturing (3D printing) enables the fabrication of highly customized and complex devices and is therefore increasingly used in the field of life sciences and biotechnology. However, the application of 3D‐printed parts in these fields requires not only their biocompatibility but also their sterility. The most common method for sterilizing 3D‐printed parts is heat steam sterilization—but most commercially available 3D printing materials cannot withstand high temperatures. In this study, a novel heat‐resistant polyacrylate material for high‐resolution 3D Multijet printing was evaluated for the first time for its resistance to heat steam sterilization and in vitro biocompatibility with mouse fibroblasts (L929), human embryonic kidney cells (HEK 293E), and yeast (Saccharomyces cerevisiae (S. cerevisiae)). Analysis of the growth and viability of L929 cells and the growth of S. cerevisiae confirmed that the extraction media obtained from 3D‐printed parts had no negative effect on the aforementioned cell types, while, in contrast, viability and growth of HEK 293E cells were affected. No different effects of the material on the cells were found when comparing heat steam sterilization and disinfection with ethanol (70%, v/v). In principle, the investigated material shows great potential for high‐resolution 3D printing of novel cell culture systems that are highly complex in design, customized and easily sterilizable—however, the biocompatibility of the material for other cell types needs to be re‐evaluated.     

A scoping review of burden of disease studies estimating disability-adjusted life years due to Taenia solium

BackgroundTaenia solium is the most significant global foodborne parasite and the leading cause of preventable human epilepsy in low and middle-income countries in the form of neurocysticercosis.ObjectivesThis scoping review aimed to examine the methodology of peer-reviewed studies that estimate the burden of T. solium using disability-adjusted life years.Eligibility criteriaStudies must have calculated disability-adjusted life years relating to T. solium.Charting methodsThe review process was managed by a single reviewer using Rayyan. Published data relating to disease models, data sources, disability-adjusted life years, sensitivity, uncertainty, missing data, and key limitations were collected.Results15 studies were included for review, with seven global and eight national or sub-national estimates. Studies primarily employed attributional disease models that relied on measuring the occurrence of epilepsy before applying an attributable fraction to estimate the occurrence of neurocysticercosis-associated epilepsy. This method relies heavily on the extrapolation of observational studies across populations and time periods; however, it is currently required due to the difficulties in diagnosing neurocysticercosis. Studies discussed that a lack of data was a key limitation and their results likely underestimate the true burden of T. solium. Methods to calculate disability-adjusted life years varied across studies with differences in approaches to time discounting, age weighting, years of life lost, and years of life lived with disability. Such differences limit the ability to compare estimates between studies.ConclusionsThis review illustrates the complexities associated with T. solium burden of disease studies and highlights the potential need for a burden of disease reporting framework. The burden of T. solium is likely underestimated due to the challenges in diagnosing neurocysticercosis and a lack of available data. Advancement in diagnostics, further observational studies, and new approaches to parameterising disease models are required if estimates are to improve.     

Salicylaldoxime derivatives as new leads for the development of carbonic anhydrase inhibitors

New compounds containing a novel zinc binding group (salicylaldoxime system) were identified as effective inhibitors of carbonic anhydrases (CAs). This structural motif seems to bind the catalytic zinc ion of CAs, revealing itself as a new valid alternative to the sulfonamide group. Computational procedures were used to investigate the binding mode of this class of compounds, within the active site of CAII. This study suggests that the salicylaldoxime moiety binds the zinc ion through the oxime oxygen atom that also forms an H-bond with T199. The results herein obtained will allow the development of new CA-inhibitors bearing the salicylaldoxime moiety.     

Dynamic changes in microbiota and mycobiota during spontaneous ‘Vino Santo Trentino’ fermentation

Vino Santo is a sweet wine produced from late harvesting and pressing of Nosiola grapes in a small, well‐defined geographical area in the Italian Alps. We used metagenomics to characterize the dynamics of microbial communities in the products of three wineries, resulting from spontaneous fermentation with almost the same timing and procedure. Comparing fermentation dynamics and grape microbial composition, we show a rapid increase in a small number of wine yeast species, with a parallel decrease in complexity. Despite the application of similar protocols, slight changes in the procedures led to significant differences in the microbiota in the three cases of fermentation: (i) fungal content of the must varied significantly in the different wineries, (ii) Pichia membranifaciens persisted in only one of the wineries, (iii) one fermentation was characterized by the balanced presence of Saccharomyces cerevisiae and Hanseniaspora osmophila during the later phases. We suggest the existence of a highly winery‐specific ‘microbial‐terroir’ contributing significantly to the final product rather than a regional ‘terroir’. Analysis of changes in abundance during fermentation showed evident correlations between different species, suggesting that fermentation is the result of a continuum of interaction between different species and physical–chemical parameters.     

Cytotoxicity,apoptosis, DNA damage and methylation in mammary and kidney epithelial cell lines exposed to ochratoxin A

This study aimed to investigate the in vitro damage induced by ochratoxin A (OTA) in BME-UV1 and MDCK epithelial cells. Both cells lines were treated with OTA (0 up to 10 μg/mL), and cell viability (MTT assay), membrane stability (lactate dehydrogenase (LDH) release assay) and apoptotic cell rate (Tunel assay) were investigated. Further, the effect of the incubation with OTA has been evaluated at DNA level by the determination of DNA integrity, by the quantification of DNA adduct formation (8-hydroxy-2′-deoxyguanosine (8-OHdG)) and by the assessment of the global DNA methylation status (5-methyl-cytosine (5-mC)). The obtained results showed that after 24 h of OTA treatment, BME-UV1 cell viability was reduced in a dose-dependent way. OTA significantly (P?<?0.05) increased LDH release in BME-UV1 cells at all concentrations tested. OTA (1.25 μg/mL) induced 35 % LDH release in MDCK cells (P?<?0.05). A significant (P?<?0.05) change in percentages of apoptotic BME-UV1 (10?±?0.86) and MDCK (25?±?0.88) cells was calculated when the cells were co-incubated with OTA. The level of 8-OHdG adduct formation was significantly (P?<?0.05) increased in BME-UV1 cells treated with 1.25 μg/mL of OTA. The results of the present study suggest that a different mechanism of action may occur in these cell lines.

Open image in new window

Graphical abstract Study results overview

     

Computational evaluation of load carriage effects on gait balance stability

Evaluating the effects of load carriage on gait balance stability is important in various applications. However, their quantification has not been rigorously addressed in the current literature, partially due to the lack of relevant computational indices. The novel Dynamic Gait Measure (DGM) characterizes gait balance stability by quantifying the relative effects of inertia in terms of zero-moment point, ground projection of center of mass, and time-varying foot support region. In this study, the DGM is formulated in terms of the gait parameters that explicitly reflect the gait strategy of a given walking pattern and is used for computational evaluation of the distinct balance stability of loaded walking. The observed gait adaptations caused by load carriage (decreased single support duration, inertia effects, and step length) result in decreased DGM values (p < 0.0001), which indicate that loaded walking motions are more statically stable compared with the unloaded normal walking. Comparison of the DGM with other common gait stability indices (the maximum Floquet multiplier and the margin of stability) validates the unique characterization capability of the DGM, which is consistently informative of the presence of the added load.