The effect of light availability on the photosynthetic activity and productivity of outdoor cultures of Arthrospira platensis (Spirulina)

The basic requirement for establishing economically viable large-scale production of algal biomass, be it for food, feed, high-value product, or energy, is the ability to produce the biomass at a low price. To achieve this goal, an efficient production protocol is needed that ensures that the potential productivity is obtained at any given time. When productivity is defined by the ability to utilize the available solar radiation that drives photosynthesis, the production protocol must be optimized to meet this requirement. In the current study, we demonstrate that by modifying the light available to Arthrospira platensis cells cultured outdoors by a variety of options like modifying the standing biomass concentration, changing the mixing rate, or shading can change the potential photosynthetic activity and apparent activity. By optimizing the light available to algae cells under outdoor conditions, productivity can be increased by approximately 50 %, from 15.6 g m^?2 day^?1 in a culture that suffers from overexposure to light to 22.4 g m^?2 day^?1 in a culture in which light downregulation is minimized. Therefore, by using a variety of methodologies to estimate photosynthetic activity, we demonstrate that overexposing the cells to light may result in downregulation of the photosynthetic activity leading to photoinhibition and lower biomass productivity.     

Biomass and lipid enhancement in Ankistrodesmus sp. cultured with reused and minimal nutrients media

Microalgae are a promising feedstock for biofuel production. Lipid content in microalgae could be enhanced under nutrient depletion. This work investigated the effect of the nutrient on lipid accumulation in Ankistrodesmus sp. culture. Batch cultures were carried out using fresh BG11 medium, and after the harvest, the medium was reused for the next culture; this method was repeated two times. The maximum lipid productivity of 29.75 mg L^?1 day^?1 was obtained from the culture with the second reuse medium. In continuous cultures, Ankistrodesmus sp. was cultured in both fresh and modified BG11 mediums. The modified BG11 medium was adjusted to resemble the content of the first reuse medium. As a comparison between batch and continuous cultures, it was proven that the productivity in the continuous culture was better than in the batch, where the achievable maximum biomass and lipid were 188.30 and 38.32 mg L^?1 day^?1. The maximum lipid content of 34.22% was obtained from the continuous culture at a dilution rate of 0.08 day^?1, whereas the maximum saturated and unsaturated fatty acid productivities of 79.96 and 104.54 mg L^?1 day^?1 were obtained at a dilution rate of 0.16 day^?1.     

Effect of extraction temperature on the diffusion coefficient of polysaccharides from Spirulina and the optimal separation method

The extraction temperature had a significant impact on the concentration of polysaccharides derived from solid-liquid extraction of Spirulina. The polysaccharide concentration was significantly higher when the extraction was performed at 90°C than when it was performed at 80, 70, and 50°C. This result is related to the diffusion coefficients of the polysaccharides, which increased from 1.07 × 10^?12 at 50°C to 3.02 × 10^?12 m²/sec at 90°C. Using the Arrhenius equation, the pre-exponential factor (D ₀ ) and the activation energy (E _a ) for Spirulina polysaccharide extraction were calculated as 7.958 × 10^?9 m²/sec and 24.0 kJ/mol, respectively. Among the methods used for the separation of Spirulina polysaccharides, cetyltrimethylammonium bromide (CTAB, method I) and organic solvent (ethanol, in methods II and III) provided similar yields of polysaccharides. However, the separation of polysaccharides using an ultrafiltration (UF) process (method III) and ethanol precipitation was superior to separation via CTAB or vacuum rotary evaporation (method II). The use of a membrane with a molecular weight cut-off (MWCO) of 30 kDa and an area of 0.01 m² at a feed pressure of 103 kPa with a mean permeate flux of 39.3 L/m²/h and a retention rate of 95% was optimal for the UF process. The addition of two volumes (v/v) of ethanol, which gave a total polysaccharide content of approximately 4% dry weight, was found to be most suitable for polysaccharide precipitation. The results of a Sepharose 6B column separation showed that the molecular weights of the polysaccharides in fractions I and II were 212 and 12.6 kDa, respectively.     

Role of light and photosynthesis on the acclimation process of the cyanobacteriumSpirulina platensis to salinity stress

The response ofSpirulina platensis cells to salinity stress was studied. Once adapted to the higher osmoticum, photosynthetic parameters such as the maximum rate of photosynthesis under saturating irradiance (P_max) and the initial slope of the P-I curve () are reduced by 15% and 25% in 0.5 M NaCl grown cells, respectively. Salt-adapted cells have a modified biochemical composition; reduced protein and chlorophyll content, and an increased level of carbohydrates. The reduction in the photosynthetic capacity of the salt-adaptedSpirulina cells reflects a lower ability to utilize light energy and results in an increase in the susceptibility of the stressed cells to photoinhibition. This conclusion is supported by the finding that cultures exposed to salt stress show not only a decrease in growth rate (), but lose the ability to respond to increased irradiance with an increase in growth. The use of variable fluorescence as a fast and reliable measurement to follow the changes in PSII of salt-stressesSpirulina cells enables following the early events of salinity shock. It indicates that as soon as the cells are exposed to salt, a protection mechanism is induced. This mechanism does not require any protein synthesis and may take place even in the dark, though at somewhat reduced effectiveness. The significance of the result in providing a better understanding of the interaction between two environmental stresses — light and salinity — and their application in the outdoor mass cultivation ofSpirulina are discussed.Author for correspondence     

Transformed phenotype conferred to NIH/3T3 cells by ectopic expression of heparin-binding growth factor 1/acidic fibroblast growth factor

Summary Heparin-binding growth factor 1 (HBGF-1), also known as acidic fibroblast growth factor, is a potent mitogen and angiogenic factor found in tissues such as brain, kidney and heart. The genomic and cDNA sequences indicate that HBGF-1 does not have a typical signal peptide sequence. HBGF-1 was shown to be localized to the extracellular matrix of cardiac myocytes, but the mechanism of secretion is not presently known. We have cloned the HBGF-1 cDNA which allowed us to directly test the biological activity, mechanism of secretion and transforming potential of the recombinant protein. A previous report showed that the truncated HBGF-1 confers partial transformed phenotype to the recipient fibroblasts. However, expression of full-length HBGF-1 has not been reported. The HBGF-1 coding sequence was cloned into the retroviral expression vector, SVX, and transfected into NIH/3T3 cells. Transfectants expressing full-length HBGF-1 protein at high levels form foci and grow to a higher cell density than the parental NIH/3T3 cells. Western blotting analysis showed that the recombinant HBGF-1 is a unique band of approximately 20 kDa and can be detected in the cell homogenate but not in the conditioned medium. NIH/3T3 cells were conferred anchorage independence when HBGF-1 was provided exogenously. We showed the transformed cells are capable of growing on soft agar even in the absence of exogenously-provided HBGF-1. Transfected cells expressing HBGF-1 also induced tumor formation when injected into nude mice. Thus, NIH/3T3 cells acquired a full spectrum of transformed phenotype when full length HBGF-1 was expressed at high levels. This work was supported by grants from the National Cancer Institute (RO1 CA45611), The March of Dimes Birth Defects Foundation (No. 6-549) and The Ohio Cancer Research Associates, Inc. I.-M.C. is a recipient of The Research Career Development Award (KO4 CA01369) from the National Institutes of Health.     

Separation and characterization of adult worm proteins and glycoproteins from the liver fluke Opisthorchis viverrini.

Detailed studies of liver fluke proteins and antigens are necessary to facilitate further investigation of the human immune responses to these parasites. Accordingly, Opisthorchis viverrini antigens were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and immunoblotting. We initially encountered excessive background smearing, vertical streaking, and indistinct bands that were similar to problems previously described by investigators studying this and other trematodes including Schistosoma mansoni. These problems were especially evident with silver staining of proteins and occurred despite the extensive use of protease inhibitors. They were minimized by using mini (vs. large) SDS-PAGE and Coomassie blue protein staining. With the latter 2 techniques, adult worm somatic proteins and excretory-secretory products were separated and characterized. Immunoblots using rabbit anti-adult worm sera demonstrated that some of these proteins were antigens common to both the adult and metacercarial stages. Several of these antigens also corresponded (according to molecular weight) to glycoproteins, detected by concanavalin A blotting. These findings form a base for subsequent studies of the human immune response to liver fluke infection.     

Photosynthetic characterization of a mutant of Spirulina platensis

A mutant of Spirulina(Arthrospira) platensis, strain I22,obtained by mutagenesis with ethylmethanesulfonate, was partially defective inthe production of -linolenic acid. However, when compared with the wildform, the I22 mutant almost lost its capacity to grow at low temperatures,although at optimal temperature growth was unaffected. Measurement of themutant's photosynthetic characteristics, including O₂-evolution,Pmaxand light saturation values, revealed significantly lower values than for thewild type, in contrast to the higher content of photosynthetic pigments,chlorophyll and phycocyanin. Whereas the total activity of photosynthesis oftheI22 mutant was 58% lower than that of the wild type, the PS II activity of theI22 mutant was 23% higher. On the other hand, the I22 mutant was 69% lower inPSI activity, and the growth rate of this mutant was limited at high lightintensity. These results indicated that the defect in the PS I complex of theI22 mutant may reduce its ability to utilize light to generate the energy usedin diverse biochemical processes, including fatty acid desaturation.     

Revealing differentially expressed proteins in two morphological forms of <Emphasis Type="Italic">Spirulina platensis</Emphasis> by proteomic analysis

Spirulina is distinguished from other cyanobacteria by its spiral morphology; however, this cyanobacterium has frequently been observed with a linear morphology in laboratory and industrial conditions. In our laboratory conditions, the simultaneously presence of the linear and spiral forms has also been observed. In the present study, the two forms of S. platensis C1 were separated and grown as axenic cultures in order to study the proteins that were differentially expressed in the soluble and insoluble protein fractions of the spiral and the linear forms. Two dimensional-differential gel electrophoresis (2D-DIGE) was performed to separate differentially expressed proteins that were subsequently identified by mass spectrometry. The differentially expressed proteins suggested two points. First, the morphological change is possibly induced by various environmental stresses such as oxygen level, carbon dioxide level, nutrient availability, and light. Second, the change of cell-shape might be a result of the change in a cell shape determination mechanism. Thus, this study is the first to show evidence at the protein level that may explain this morphological transformation in Spirulina.     

Removal of lead (Pb(2+)) by the cyanobacterium Gloeocapsa sp

Pb²⁺ removal ability of the viable-freshwater cyanobacterium Gloeocapsa sp. was studied in batch experiments. Gloeocapsa sp. was cultured in the Medium 18 with pH adjusted to 3, 4, 5, 6 and 7. Growth was subsequently determined based on the increase of chlorophyll-a content. Gloeocapsa sp. was able to grow at all pH levels tested, except at pH 3. Removal of Pb²⁺ was then further studied under pH 4. The results showed that Pb²⁺ concentration in the range of 0–20 mg L⁻¹ was not inhibitory to Gloeocapsa sp. growth but reduced its Pb²⁺ removal efficiency (by 4.5% when Pb²⁺ concentration increased from 2.5 to 20 mg L⁻¹). Pb²⁺ removal characteristics followed the Langmuir adsorption isotherm with the maximum removal capacity (q_max) of 232.56 mg g⁻¹. Adsorption of Pb²⁺ by this cyanobacterium followed the second order rate reaction and intraparticle diffusion was likely the rate-determining step. The initial rate of Pb²⁺adsorption during intraparticle diffusion was slower under light than under dark conditions, indicating that light probably slowed down the initial rate of intraparticle diffusion through the repulsion effects on cell membrane.     

Stability of phycocyanin extracted from Spirulina sp.: Influence of temperature,pH and preservatives

Temperature and pH play an important role in the stability of phycocyanin, a natural blue colorant. Systematic investigations showed the maximum stability of phycocyanin was in the pH range 5.5–6.0. Incubation at temperatures between 47 and 64 °C caused the concentration (C_R) and half-life of phycocyanin in solution to decrease rapidly. The C_R value remained at approximately 50% after incubating for 30 min at 59 °C. After heating at 60 °C for 15 min, the C_R value of phycocyanin at pH 7.0 was maintained at around 62–70% when 20–40% glucose or sucrose was added, and the half-life increased from 19 min to 30–44 min. 2.5% sodium chloride was found to be an effective preservative for phycocyanin at pH 7.0 as a C_R value of 76% was maintained and the half-life of 67 min was increased.