Response of no-till and conventionally planted grain sorghum to weed control method and row spacing

Grain sorghum can substitute for corn as a full season crop and replace soybeans in double cropping systems with wheat in the southeastern United States. Relatively few studies have been conducted to measure the response of grain sorghum to tillage, weed control method, and row spacing. These experiments were designed to determine the effects of weed control method and row spacing on no-till planted grain sorghum (Sorghum bicolor L. Moench G1516-BR) after wheat (Triticum aestivum L. Coker 68–15) and crimson clover (Trifolium incarnatum L. Bigbee) grown for winter forage in comparison to sorghum planted on a conventionally prepared seedbed. The experiment included 45, 60, and 90 cm row spacings and three weed control regimes: none, mechanical, and chemical. Grain sorghum planted no-till in crimson clover or wheat sod yielded considerably more grain than conventionally planted sorghum. Grain sorghum produced significantly higher yields in 45-cm rows than in 60-and 90-cm row spacings with all three planting methods. Effects of chemical weed control on weed population with all tillage methods and on grain yield with conventional tillage were significant. There were no significant differences in grain protein content due to row spacing or weed control method.     

Activation characteristics of transient receptor potential ankyrin 1 and its role in nociception

Transient receptor potential (TRP) ankyrin 1 (TRPA1) is a Ca(2+)-permeant, nonselective cationic channel. It is predominantly expressed in the C afferent sensory nerve fibers of trigeminal and dorsal root ganglion neurons and is highly coexpressed with the nociceptive ion channel transient receptor potential vanilloid 1 (TRPV1). Several physical and chemical stimuli have been shown to activate the channel. In this study, we have used electrophysiological techniques and behavioral models to characterize the properties of TRPA1. Whole cell TRPA1 currents induced by brief application of lower concentrations of N-methyl maleimide (NMM) or allyl isothiocyanate (AITC) can be reversed readily by washout, whereas continuous application of higher concentrations of NMM or AITC completely desensitized the currents. The deactivation and desensitization kinetics differed between NMM and AITC. TRPA1 current amplitude increased with repeated application of lower concentrations of AITC, whereas saturating concentrations of AITC induced tachyphylaxis, which was more pronounced in the presence of extracellular Ca(2+). The outward rectification exhibited by native TRPA1-mediated whole cell and single-channel currents was minimal as compared with other TRP channels. TRPA1 currents were negatively modulated by protons and polyamines, both of which activate the heat-sensitive channel, TRPV1. Interestingly, neither protein kinase C nor protein kinase A activation sensitized AITC-induced currents, but each profoundly sensitized capsaicin-induced currents. Current-clamp experiments revealed that AITC produced a slow and sustained depolarization as compared with capsaicin. TRPA1 is also expressed at the central terminals of nociceptors at the caudal spinal trigeminal nucleus. Activation of TRPA1 in this area increases the frequency and amplitude of miniature excitatory or inhibitory postsynaptic currents. In behavioral studies, intraplantar and intrathecal administration of AITC induced more pronounced and prolonged changes in nociceptive behavior than those induced by capsaicin. In conclusion, the characteristics of TRPA1 we have delineated suggest that it might play a unique role in nociception.     

Sorption of heavy metals from electroplating effluent using immobilized biomass Trichoderma viride in a continuous packed-bed column

The sorption of heavy metals ions by immobilized Trichoderma viride biomass in a packed-bed column was studied. Fungal biomass T. viride was immobilized to Ca-alginate used for removal of Cr(VI), Ni(II) and Zn(II) ions from synthetic solutions and electroplating effluent. The experiments were conducted to study the effect of important design parameters such as bed height, flow rate and initial concentration of metal ions. The maximum sorption capacity was observed at flow rate 5 ml/min, bed height 20 cm and metal ions concentration 50 mg/L with immobilized biomass. Whereas, breakthrough time and saturation time decreased with increase flow rate and metal ions concentration and an inverse condition was found in bed height. The bed depth service time (BDST) Adams-Bohart model was used to analyze the experimental data. The regeneration efficiency was observed 40.1%, 75% and 53% for Cr(VI), Ni(II) and Zn(II) without any significant alteration in sorption capacity after 5th sorption-desorption cycles.     

A prospective observational study to sequentially determine the dermoscopic features of vitiligo and its association with disease activity in patients on medical treatment

Prospective data on correlation between dermoscopic features of vitiligo and disease activity are scarce. This study was conducted to sequentially determine the dermoscopic features of vitiligo and to evaluate their association with disease activity. A cohort of 30 patients with 60 active vitiligo patches on medical therapy was subjected to sequential clinical and dermoscopic examination at four weekly intervals till 16 weeks. Disease activity at each visit was assessed using serial clinical photographs and modified vitiligo activity severity index. The dermoscopic images were merged and analysed for a predefined set of dermoscopic parameters by two blinded dermatologists. Paired analysis of dermoscopic features was done between baseline, and stabilized vitiligo patches at 12 and 16 weeks. Pigment network changes (absent and reduced pigment network, p < .001), perifollicular depigmentation (p = .02), ill-defined margins (p = .04) and satellite lesions and micro-Koebner phenomenon (p < .001) were associated with active vitiligo while perifollicular repigmentation (p < .001) was associated with stabilizing and repigmenting vitiligo. Satellite lesions and micro-Koebner's phenomena were suggestive of unstable disease irrespective of site of target lesion, while perifollicular repigmentation was suggestive of stabilized/repigmenting disease only at non-acral sites. We found sequential dermoscopy to be useful to assess disease activity and potential for repigmentation in localized vitiligo.     

Statistical modelling and optimization of substrate composition for bacterial growth and cadmium removal using response surface methodology

In this study, substrate composition was optimized for the growth of Achromobacter xyloxidans and biosorption of Cd(II) from aqueous solution. Response surface methodology (RSM) was used to investigate the function of three independent operating variables, namely, peptone (2.5-10 g/L), beef extract (2.5-5.0 g/L) and incubation time (24-96 h), on dependent variables, i.e. sorption of Cd(II) ions, protein content and biomass growth of A. xyloxidans. The maximum Cd(II) removal efficiency of 69.2%, protein content 1.9 mg/L and growth 0.354 optical density was found at optimal conditions of peptone 10 g/L, incubation time 60 h and beef extract 2.5 g/L. The significance of independent variables and interactions between variables were tested by means of the analysis of variance (ANOVA) with 95% confidence limits and values of “Prob > F” less than 0.0500 indicate that model terms are significant. Fourier transfer infrared (FTIR) analysis was used to investigate sorption mechanism and involved functional groups in Cd(II) binding.     

Changes in protein profile of pigeonpea genotypes in response to NaCl and boron stress

Two pigeonpea [Cajanus cajan (L.) Millsp.] genotypes, a salt tolerant Manak and a salt sensitive ICPL 88039 were subjected to stress treatment of 3 mM boron, 60 mM NaCl and boron + NaCl at the seedling stage. Radicle and plumule proteins were analyzed by SDS-PAGE. Boron treatment increased 28.3 kDa proteins in plumule and 38.3 and 51.9 kDa proteins in radicle of Manak, however, there was no specific protein in ICPL 88039 either in plumule or in radicle. In NaCl treatment 95.6 kDa proteins appeared in plumule and 67.5 kDa proteins in radicle of Manak. Conversely content of some proteins decreased by boron treatment alone or in combination with NaCl although they were present in the controls. Thus, 54.3 kDa protein disappeared in ICPL 88039 plumule, 68.4 kDa in Manak radicle and 28.1 kDa in ICPL 88039 radicle.     

Optimization of enzymatic hydrolysis of pretreated rice straw and ethanol production

Cellulase, Tween 80, and β-glucosidase loading were studied and optimized by response surface methodology to improve saccharification. Microwave alkali-pretreated rice straw used as substrate for onsite enzyme production by Aspergillus heteromorphus and Trichoderma reesei. The highest enzymatic hydrolysis (84%) was obtained from rice straw at crude enzyme loading of 10 FPU/gds of cellulase, 0.15% Tween 80, and 100 international unit/g dry solids of β-glucosidase activities. Enzymatic hydrolyzate of pretreated rice straw was used for ethanol production by Saccharomyces cerevisiae, Scheffersomyces stipitis, and by co-culture of both. The yield of ethanol was 0.50, 0.47, and 0.48 g_p/g_s by S. cerevisiae, S. stipitis, and by co-culture, respectively, using pretreated rice straw hydrolyzate. The co-culture of S. cerevisiae and S. stipitis produced 25% more ethanol than S. cerevisiae alone and 31% more ethanol than S. stipitis alone. During anaerobic fermentation 65.08, 36.45, and 50.31 μmol/ml CO₂ released by S. cerevisiae, S. stipitis, and by co-culture, respectively. The data indicated that saccharification efficiency using optimized crude enzyme cocktail was good, and enzymatic hydrolyzate could be fermented to produce ethanol.     

Response surface methodology as a decision-making tool for optimization of culture conditions of green microalgae Chlorella spp. for biodiesel production

We have evaluated process optimization and the interactive effects of a number of variables using a Box–Behnken design of response surface methodology (RSM). The process variables nitrate, phosphate, glucose and pH were optimized to enhance the cell growth rate, lipid accumulation and other biochemical parameters of Chlorella spp. The most significant increase in lipid production (dry cell weight basis) occurred at limited concentrations of nitrate and phosphate, 1 % glucose and pH 7.5. The addition of nitrates during the mid-lag and mid-exponential phases produced the maximum inhibitory effect on lipid accumulation and the presence of yeast extract led to a further enhancement of lipid accumulation. Of all the media tested, BG-11 was the best suited medium for algal biomass production and chlorophyll content. A significant increase in algal biomass was observed in BG-11 supplemented with bicarbonate and glucose (1 %). The maximum specific growth rate observed was on 9th day of culturing. Results of optimization of process variables through response surface methodology and optimization of various other conditions reflect cutting edge research directed towards increasing algal biomass and lipid content for biodiesel production using an efficient economical technological approach.