Phylogenetic distribution in the genus Mus of t-complex-specific DNA and protein markers: inferences on the origin of t-haplotypes

We have examined the phylogenetic distribution of two t-specific markers among representatives of various taxa belonging to the genus Mus. The centromeric TCP-1a marker (a testicular protein variant specific for all t-haplotypes so far studied) has also been apparently detected in several non-t representatives of the Mus IVA, Mus IVB, and probably M. cervicolor species. By contrast, a t-specific restriction- fragment-length polymorphism allele (RFLP) of the telomeric alpha- globin pseudogene DNA marker alpha-psi-4 was found only in animals belonging to the M. musculus-complex species either bearing genuine t- haplotypes or, like the M. m. bactrianus specimen studied here, likely to do so. This t-specific alpha-psi-4 RFLP allele was found to be as divergent from the RFLP alleles of the latter, non-t, taxonomical groups as it is from Mus 4A, Mus 4B, or M. spretus ones. These results suggest the presence of t-haplotypes and of t-specific markers in populations other than those belonging to the M. m. domesticus and M. m. musculus subspecies, implying a possible origin for t-haplotypes prior to the radiation of the most recent offshoot of the Mus genus (i.e., the spretus/domesticus divergence), some 1-3 Myr ago.      

The contractile basis of amoeboid movement: V. The control of gelation, solation, and contraction in extracts from dictyostelium discoideum

Motile extracts have been prepared from Dictyostelium discoideum by homogenization and differential centrifugation at 4 degrees C in a stabilization solution (60). These extracts gelled on warming to 25 degrees Celsius and contracted in response to micromolar Ca++ or a pH in excess of 7.0. Optimal gelation occurred in a solution containing 2.5 mM ethylene glycol-bis (β-aminoethyl ether)N,N,N',N'-tetraacetate (EGTA), 2.5 mM piperazine-N-N'-bis [2-ethane sulfonic acid] (PIPES), 1 mM MgC1(2), 1 mM ATP, and 20 mM KCI at ph 7.0 (relaxation solution), while micromolar levels of Ca++ inhibited gelation. Conditions that solated the gel elicited contraction of extracts containing myosin. This was true regardless of whether chemical (micromolar Ca++, pH >7.0, cytochalasin B, elevated concentrations of KCI, MgC1(2), and sucrose) or physical (pressure, mechanical stress, and cold) means were used to induce solation. Myosin was definitely required for contraction. During Ca++-or pH-elicited contraction: (a) actin, myosin, and a 95,000-dalton polypeptide were concentrated in the contracted extract; (b) the gelation activity was recovered in the material sqeezed out the contracting extract;(c) electron microscopy demonstrated that the number of free, recognizable F-actin filaments increased; (d) the actomyosin MgATPase activity was stimulated by 4- to 10-fold. In the absense of myosin the Dictyostelium extract did not contract, while gelation proceeded normally. During solation of the gel in the absense of myosin: (a) electron microscopy demonstrated that the number of free, recognizable F- actin filaments increased; (b) solation-dependent contraction of the extract and the Ca++-stimulated MgATPase activity were reconstituted by adding puried Dictyostelium myosin. Actin purified from the Dictyostelium extract did not gel (at 2 mg/ml), while low concentrations of actin (0.7-2 mg/ml) that contained several contaminating components underwent rapid Ca++ regulated gelation. These results indicated : (a) gelation in Dictyostelium extracts involves a specific Ca++-sensitive interaction between actin and several other components; (b) myosin is an absolute requirement for contraction of the extract; (c) actin-myosin interactions capable of producing force for movement are prevented in the gel, while solation of the gel by either physical or chemical means results in the release of F-actin capable of interaction with myosin and subsequent contraction. The effectiveness of physical agents in producting contraction suggests that the regulation of contraction by the gel is structural in nature.     

Roles of creatine in the regulation of cardiac protein synthesis

The observation that increased muscular activity leads to muscle hypertrophy is well known, but identification of the biochemical and physiological mechanisms by which this occurs remains an important problem. Experiments have been described (5, 6) which suggest that creatine, an end product of contraction, is involved in the control of contractile protein synthesis in differentiating skeletal muscle cells and may be the chemical signal coupling increased muscular activity and the increased muscular mass. During contraction, the creatine concentration in muscle transiently increases as creatine phosphate is hydrolyzed to regenerate ATP. In isometric contraction in skeletal muscle for example, Edwards and colleagues (3) have found that nearly all of the creatine phosphate is hydrolyzed. In this case, the creatine concentration is increased about twofold, and it is this transient change in creatine concentration which is postulated to lead to increased contractile protein synthesis. If creatine is found in several intracellular compartments, as suggested by Lee and Vissher (7), local changes in concentration may be greater then twofold. A specific effect on contractile protein synthesis seems reasonable in light of the work of Rabinowitz (13) and of Page et al. (11), among others, showing disproportionate accumulation of myofibrillar and mitochondrial proteins in response to work-induced hypertrophy and thyroxin-stimulated growth. Previous experiments (5, 6) have shown that skeletal muscles cells which have differentiated in vitro or in vivo synthesize myosin heavy-chain and actin, the major myofibrillar polypeptides, faster when supplied creatine in vitro. The stimulation is specific for contractile protein synthesis since neither the rate of myosin turnover nor the rates of synthesis of noncontractile protein and DNA are affected by creatine. The experiments reported in this communication were undertaken to test whether creatine selectively stimulates contractile protein synthesis in heart as it does in skeletal muscle.     

Microengineered systems with iPSC-derived cardiac and hepatic cells to evaluate drug adverse effects

Hepatic and cardiac drug adverse effects are among the leading causes of attrition in drug development programs, in part due to predictive failures of current animal or in vitro models. Hepatocytes and cardiomyocytes differentiated from human induced pluripotent stem cells (iPSCs) hold promise for predicting clinical drug effects, given their human-specific properties and their ability to harbor genetically determined characteristics that underlie inter-individual variations in drug response. Currently, the fetal-like properties and heterogeneity of hepatocytes and cardiomyocytes differentiated from iPSCs make them physiologically different from their counterparts isolated from primary tissues and limit their use for predicting clinical drug effects. To address this hurdle, there have been ongoing advances in differentiation and maturation protocols to improve the quality and use of iPSC-differentiated lineages. Among these are in vitro hepatic and cardiac cellular microsystems that can further enhance the physiology of cultured cells, can be used to better predict drug adverse effects, and investigate drug metabolism, pharmacokinetics, and pharmacodynamics to facilitate successful drug development. In this article, we discuss how cellular microsystems can establish microenvironments for these applications and propose how they could be used for potentially controlling the differentiation of hepatocytes or cardiomyocytes. The physiological relevance of cells is enhanced in cellular microsystems by simulating properties of tissue microenvironments, such as structural dimensionality, media flow, microfluidic control of media composition, and co-cultures with interacting cell types. Recent studies demonstrated that these properties also affect iPSC differentiations and we further elaborate on how they could control differentiation efficiency in microengineered devices. In summary, we describe recent advances in the field of cellular microsystems that can control the differentiation and maturation of hepatocytes and cardiomyocytes for drug evaluation. We also propose how future research with iPSCs within engineered microenvironments could enable their differentiation for scalable evaluations of drug effects.     

Role of zymogen and activated factor X as scaffolds for the inhibition of the blood coagulation factor VIIa-tissue factor complex by recombinant nematode anticoagulant protein c2

Recombinant nematode anticoagulant protein c2 (rNAPc2) is a potent, factor Xa (fXa)-dependent small protein inhibitor of factor VIIa-tissue factor (fVIIa.TF), which binds to a site on fXa that is distinct from the catalytic center (exo-site). In the present study, the role of other fX derivatives in presenting rNAPc2 to fVIIa.TF is investigated. Catalytically active and active site blocked fXa, as well as a plasma-derived and an activation-resistant mutant of zymogen fX bound to rNAPc2 with comparable affinities (K(D) = 1-10 nm), and similarly supported the inhibition of fVIIa.TF (K(i)* = approximately 10 pm). The roles of phospholipid membrane composition in the inhibition of fVIIa.TF by rNAPc2 were investigated using TF that was either detergent-solubilized (TF(S)), or reconstituted into membranes, containing phosphatidylcholine (TF(PC)) or a mixture of phosphatidylcholine and phosphatidylserine (TF(PCPS)). In the absence of the fX derivative, inhibition of fVIIa.TF was similar for all three conditions (K(i) approximately 1 microm), whereas the addition of the fX derivative increased the respective inhibition by 35-, 150-, or 100,000-fold for TF(S), TF(PC), and TF(PCPS). The removal of the gamma-carboxyglutamic acid-containing domain from the fX derivative did not affect the binding to rNAPc2, but abolished the effect of factor Xa as a scaffold for the inhibition of fVIIa.TF by rNAPc2. The overall anticoagulant potency of rNAPc2, therefore, results from a coordinated recognition of an exo-site on fX/fXa and of the active site of fVIIa, both of which are properly positioned in the ternary fVIIa.TF.fX(a) complex assembled on an appropriate phospholipid surface.     

Analysis of the N-acetylneuraminic acid and N-glycolylneuraminic acid contents of glycoproteins by high-pH anion-exchange chromatography with pulsed amperometric detection

Presence or absence of N-acetylneuraminic acid (Neu5Ac) can change a sialylated glycoprotein's serum half-life and possibly its function. We evaluated the linearity, sensitivity, reproducibility, and accuracy of a HPAEC/PAD method to determine its suitability for routine simultaneous analysis of Neu5Ac and N-glycolylneuraminic acid (Neu5Gc). An effective internal standard for this analysis is 3-deoxy-d-glycero-d- galacto-2-nonulosonic acid (KDN). We investigated the effect of the Au working electrode recession and determined that linear range and sensitivity were dependent on electrode recession. Using an electrode that was 350 &mgr;m recessed from the electrode block, the minimum detection limits of Neu5Ac, KDN, and Neu5Gc were 2, 5, and 2 pmol, respectively, and were reduced to 1, 2, and 0.5 pmol using a new electrode. The response of standards was linear from 10 to 500 pmol (r2>0.99) regardless of electrode recession. When Neu5Ac, KDN, and Neu5Gc (200 pmol each) were analyzed repetitively for 48 h, area RSDs were <3%. Reproducibility was unaffected when injections of glycoprotein neuraminidase and acid digestions were interspersed with standard injections. Area RSDs of Neu5Ac and Neu5Gc improved when the internal standard was used. We determined the precision and accuracy of this method for both a recessed and a new working electrode by analyzing Neu5Ac and Neu5Gc contents of bovine fetuin and bovine and human transferrins. Results were consistent with published values and independent of the working electrode. The sensitivity, reproducibility, and accuracy of this method make it suitable for direct routine analysis of glycoprotein Neu5Ac and Neu5Gc contents.      

Improvement of sordarin production through process optimization: combining traditional approaches with DOE

BMS-353645, also known as sordarin, was of interest based on its activity against pathogenic fungi. The objective of these studies was to provide high quality starting substrate for chemical modification aimed at further improving biological activity, with particular interest in the inhibition of Aspergillus. In the work presented here, Design of Experiments, or DOE, was successfully combined with traditional approaches to significantly improve sordarin yields in fermentation flasks. Overall, yields were increased 25-fold from <100 μg/g to as high as 2,609 μg/g in flasks through the use of various medium and conduction changes supplemented with DOE. The improved process was then successfully scaled to pilot plant tanks with the best batch producing 2,389 μg/g sordarin at the 250-l scale.     

The effects of long-term endurance training on the immune and endocrine systems of elderly men: the role of cytokines and anabolic hormones

Background  

a decline in immune and endocrine function occurs with aging. The main purpose of this study was to investigate the impact of long-term endurance training on the immune and endocrine system of elderly men. The possible interaction between these systems was also analysed.     

Evaluation of the Performance Characteristics of Bilayer Tablets: Part I. Impact of Material Properties and Process Parameters on the Strength of Bilayer Tablets

Bilayer tableting technology has gained popularity in recent times, as bilayer tablets offer several advantages over conventional tablets. There is a dearth of knowledge on the impact of material properties and process conditions on the performance of bilayer tablets. This paper takes a statistical approach to develop a model that will determine the effect of the material properties and bilayer compression process parameters on the bonding strength and mode of breakage of bilayer tablets. Experiments were carried out at pilot scale to simulate the commercial manufacturing conditions. As part of this endeavor, a seven-factor half-fraction factorial (2⁷⁻¹) design was executed to study the effect of bilayer tablet compression process factors on the bonding strength of bilayer tablets. Factors studied in this work include: material properties (plastic and brittle), layer ratio, dwell time, layer sequence, first- and second-layer forces, and lubricant concentration. Bilayer tablets manufactured in this study were tested using the axial tester, as it considers both the interfacial and individual layer bonding strengths. Responses of the experiments were analyzed using PROC GLM of SAS (SAS Institute Inc, Cary, North Carolina). A model was fit using all the responses to determine the significant interactions (p < 0.05). The results of this study indicated that nature of materials played a critical role on the strength of bilayer compacts and also on mode of fracture. Bilayer tablets made with brittle materials in both the layers are strongest, and fracture occurred in the first layer indicating that interface is stronger than layers. Significant interactions were observed between the selected factors and these results will provide an insight into the interplay of material properties, process parameters, and lubricant concentration on the bonding strength and mode of breakage of bilayer tablets.

Electronic supplementary material

The online version of this article (doi:10.1208/s12249-012-9845-9) contains supplementary material, which is available to authorized users.KEY WORDS: axial tester, bilayer tablets, DOE, interfacial strength, process parameters