Synthesis of 5-chloroformycin A, 5-chloro-2''-deoxyformycin A and certain related 5,7-disubstituted 3-beta-D-ribofuranosylpyrazolo[4,3-d] pyrimidines from formycin A.

A facile synthesis of 7-amino-5-chloro-3-beta-D-ribofuranosylpyrazolo [4,3-d]pyrimidine (5-chloroformycin A, 6), 7-amino-5-chloro-3-(2-deoxy-beta-D-erythro-pentofuranosyl) pyrazolo [4,3-d]-pyrimidine (5-chloro-2'-deoxyformycin A, 13) and certain related 5,7-disubstituted pyrazolo[4,3-d]pyrimidine ribonucleosides is described starting with formycin A. Thiation of tri-O-acetyloxoformycin B (4b) with phosphorus pentasulfide, followed 3-beta-D-ribofuranosyl-7-thioxopyrazolo[4,3-d] pyrimidin-5(1H,4H,6H)-one (3b) in excellent yield. Chlorination of 4b with either phosphorus oxychloride or phenyl phosphonicdichloride furnished the key intermediate 5,7-dichloro-3-(2,3, 5-tri-O-acetyl-beta-D-ribofuranosyl)pyrazolo[4,3-d]pyrimidine (5a), which on deacetylation afforded 5,7-dichloro-3-beta-D-ribofuranosylpyrazolo [4,3-d]pyrimidine (5b). Ammonolysis of 5a with liquid ammonia gave 6, whereas with MeOH/NH3, a mixture of 6 and 7-methoxy-5-chloro-3-beta-D-ribofuranosylpyrazolo[4,3-d]pyrimidine (7) was obtained. Reaction of 6 with lithium azide and subsequent hydrogenation afforded 5-aminoformycin A (10). Treatment of 5a with thiourea gave 5-chloro-3-(2,3,5-tri-O-acetyl-beta-D-ribofuranosyl) pyrazolo[4,3-d]pyrimidine-7(1H,6H)-thione (8a), which on further reaction with sodium hydrosulfide furnished 3-beta-D-ribofuranosylpyrazolo [4,3-d]pyrimidine-5,7(1H,4H,6H)-dithione (11). The four-step deoxygenation procedure using phenoxythiocarbonylation of the 2'-hydroxy group of the 3', 5'-protected 6 gave 5-chloro-2'-deoxyformycin A (13).     

Constituents of human meconium--I. Identification of 3-hydroxy-etianic acids

The monohydroxylated fraction of bile acids of human meconium was analyzed by capillary GC-MS. In the sulfate-glucuronide fraction three saturated, and one unsaturated C20 steroidal acids were found. These acids were identified as 3 alpha-hydroxy-5 alpha-, 3 alpha-hydroxy-5 beta-,3 beta-hydroxy-5 alpha-androstane-17 beta-carboxylic, and 3 beta-hydroxyandrost-5-ene-17 beta-carboxylic based on the unequivocal GC-MS comparison with standards of all possible epimers at C-3, 5 and 17. The amount of the major C20 acid, 3 alpha-hydroxy-5 alpha-androstane-17 beta-carboxylic, in meconium was 0.2 nmol/g, i.e. 5 to 10 times the amount of lithocholic acid. To prevent the oxidation of 21-hydroxy-20-oxopregnanes to C20 acids meconium was extracted in the presence of sodium borohydride. In the absence of this reducing agent the amount of 3 beta-hydroxyandrost-5-ene-17 beta-carboxylic acid was increased and its 17 alpha-epimer could be detected. This indicates partial artifactual formation of this C20 acid from 21-hydroxypregnenolone, which is known to be present in human meconium. The amount of the saturated C20 acids was unaffected by the presence of sodium borohydride in the extraction medium, and their native occurence in human meconium was further confirmed by the absence of their 17 alpha-epimers in extracts obtained both with and without borohydride. The probable metabolic origin of C20 acids in the fetal-placental-maternal unit is discussed.     

The Synthesis of the Sixteen Possible 2′-O-Methyl MMI Dimer Phosphoramidites: Building Blocks for the Synthesis of Novel Antisense Oligonucleotides

Abstract

The synthesis of Methylene(methylimino) or MMI linked nucleoside dimers in all sixteen possible configurations has been accomplished via a reductive coupling of a nucleosidic aldehyde with an hydroxylamine. This has allowed us to prepare all of the necessary 2′-O-methyl MMI dimer building blocks necessary for use in an antisense motif.     

Pluripotency of embryonic stem cells lacking clathrin-mediated endocytosis cannot be rescued by restoring cellular stiffness

Mouse embryonic stem cells (mESCs) display unique mechanical properties, including low cellular stiffness in contrast to differentiated cells, which are stiffer. We have previously shown that mESCs lacking the clathrin heavy chain (Cltc), an essential component for clathrin-mediated endocytosis (CME), display a loss of pluripotency and an enhanced expression of differentiation markers. However, it is not known whether physical properties such as cellular stiffness also change upon loss of Cltc, similar to what is seen in differentiated cells, and if so, how these altered properties specifically impact pluripotency. Using atomic force microscopy (AFM), we demonstrate that mESCs lacking Cltc display higher Young''s modulus, indicative of greater cellular stiffness, compared with WT mESCs. The increase in stiffness was accompanied by the presence of actin stress fibers and accumulation of the inactive, phosphorylated, actin-binding protein cofilin. Treatment of Cltc knockdown mESCs with actin polymerization inhibitors resulted in a decrease in the Young''s modulus to values similar to those obtained with WT mESCs. However, a rescue in the expression profile of pluripotency factors was not obtained. Additionally, whereas WT mouse embryonic fibroblasts could be reprogrammed to a state of pluripotency, this was inhibited in the absence of Cltc. This indicates that the presence of active CME is essential for the pluripotency of embryonic stem cells. Additionally, whereas physical properties may serve as a simple readout of the cellular state, they may not always faithfully recapitulate the underlying molecular fate.     

Stage 2 Process Performance Qualification (PPQ): a Scientific Approach to Determine the Number of PPQ Batches

The approach documented in this article reviews data from earlier process validation lifecycle stages with a described statistical model to provide the “best estimate” on the number of process performance qualification (PPQ) batches that should generate sufficient information to make a scientific and risk-based decision on product robustness. This approach is based upon estimation of a statistical confidence from the current product knowledge (Stage 1), historical variability for similar products/processes (batch-to-batch), and label claim specifications such as strength. The analysis is to determine the confidence level with the measurements of the product quality attributes and to compare them with the specifications. The projected minimum number of PPQ batches required will vary depending on the product, process understanding, and attributes, which are critical input parameters for the current statistical model. This new approach considers the critical finished product CQAs (assay, dissolution, and content uniformity), primarily because assay/content uniformity and dissolution as well as strength are the components of the label claim. The key CQAs determine the number of PPQ batches. This approach will ensure that sufficient scientific data is generated to demonstrate process robustness as desired by the 2011 FDA guidance.     

Regulation of bile acid synthesis. Isolation and characterization of microsomal phosphatases

In preliminary experiments, we have shown that rat liver microsomes possess phosphatase activity which was inhibited in the presence of sodium fluoride. We have now separated six microsomal phosphatase fractions appearing to be isoenzymes. They all possess different kinetic constants and are not equally inhibited by tartrate and fluoride ions, inhibitors of phosphatase activity. One phosphatase fraction, in fact, is almost completely unaffected by fluoride ion. More pertinent to our interest, these isoenzymes exhibit differing abilities to modulate the activities of hydroxymethylglutaryl CoA reductase, acyl-CoA:cholesterol O-acetyltransferase, and cholesterol 7 alpha-hydroxylase. Interaction of four of the fractions with rat liver microsomes resulted in a decrease in cholesterol 7 alpha-hydroxylase activity; two were without effect.     

Synthesis of 2',3'-dideoxy-2',3'-didehydro nucleosides via a serendipitous route

This paper describes a "green" synthesis of 2',3'-unsaturated 2',3'-dideoxynucleosides via an electrochemical reaction. Using this approach d4T, d4U, ddA and ddI can be synthesized in high yields.     

Novel synthesis of 2'-O-methylguanosine

An efficient and chemoselective synthesis of 2'-O-methylguanosine (6) has been accomplished in high yield without protection of the guanine base. The salient feature of the synthesis of 6 lies in the application of methylene-bis-(diisopropylsilyl chloride), (MDPSCl(2), 2) as a new 3',5'-O-protecting group for nucleosides. Use of CH(3)Cl as a weak electrophile and NaHMDS as a mild base was crucial to the success of the 2'-O-methylation of 3',5'-O-protected guanosine.