Rational construction of a 2-hydroxyacid dehydrogenase with new substrate specificity

Using site-directed mutagenesis on the lactate dehydrogenase gene from Bacillus stearothermophilus, three amino acid substitutions have been made at sites in the enzyme which we suggest in part determine specificity toward different hydroxyacids (R-CHOH-COOH). To change the preferred substrates from the pyruvate/lactate pair (R = -CH3) to the oxaloacetate/malate pair (R = -CH2-COO-), the volume of the active site was increased (thr 246----gly), an acid was neutralized (asp-197----asn) and a base was introduced (gln-102 - greater than arg). The wild type enzyme has a catalytic specificity for pyruvate over oxaloacetate of 1000 whereas the triple mutant has a specificity for oxaloacetate over pyruvate of 500. Despite the severity and extent of these active site alterations, the malate dehydrogenase so produced retains a reasonably fast catalytic rate constant (20 s-1 for oxaloacetate reduction) and is still allosterically controlled by fructose-1,6-bisphosphate.     

Structure of porcine heart cytoplasmic malate dehydrogenase: combining X-ray diffraction and chemical sequence data in structural studies

The amino acid sequence of cytoplasmic malate dehydrogenase (sMDH) has been determined by a combination of X-ray crystallographic and chemical sequencing methods. The initial molecular model incorporated an "X-ray amino acid sequence" that was derived primarily from an evaluation of a multiple isomorphous replacement phased electron density map calculated at 2.5-A resolution. Following restrained least-squares crystallographic refinement, difference electron density maps were calculated from model phases, and attempts were made to upgrade the X-ray amino acid sequence. The method used to find the positions of peptides in the X-ray structure was similar to those used for studying protein homology and was shown to be successful for large fragments. For sMDH, X-ray methods by themselves were insufficient to derive a complete amino acid sequence, even with partial chemical sequence data. However, for this relatively large molecule at medium resolution, the electron density maps were of considerable help in determining the linear position of peptide fragments. The N-acetylated polypeptide chain of sMDH has 331 amino acids and has been crystallographically refined to an R factor of 19% for 2.5-A resolution diffraction data.     

Comparison of the precursor and mature forms of rat heart mitochondrial malate dehydrogenase

The complete amino acid sequence of mitochondrial malate dehydrogenase from rat heart has been determined by chemical methods. Peptides used in this study were purified after digestions with cyanogen bromide, trypsin, endoproteinase Lys C, and staphylococcal protease V-8. The amino acid sequence of this mature enzyme is compared with that of the precursor form, which includes the primary structure of the transit peptide. The transit peptide is required for incorporation into mitochondria and appears to be homologous to the NH2-terminal arm of a related cytoplasmic enzyme, pig heart lactate dehydrogenase. The amino acid differences between the rat heart and pig heart mitochondrial malate dehydrogenases are analyzed in terms of the three-dimensional structure of the latter. Only 12/314 differences are found; most are conservative changes, and all are on or near the surface of the enzyme. We propose that the transit peptide is located on the surface of the mitochondrial malate dehydrogenase precursor.     

The structure of crystalline Escherichia coli-derived rat intestinal fatty acid-binding protein at 2.5-A resolution

Rat intestinal fatty acid-binding protein (I-FABP) is an abundant cytoplasmic protein which is synthesized in the small intestinal lining cell where it is thought to participate in the absorption and intracellular metabolism of fatty acids. Each mole of this 132-residue polypeptide binds 1 mol of long chain fatty acid in a noncovalent fashion. Because of its small size and single ligand-binding site, I-FABP represents an attractive model for defining the molecular details of long chain fatty acid-protein interactions. The structure of Escherichia coli-derived rat I-FABP has now been solved to 2.5 A resolution using three isomorphous heavy atom derivatives. The protein consists of 10 anti-parallel beta-strands present as two orthogonal beta-sheets. Together a "clam shell-like" structure is formed with an opening located between two beta-strands and an interior that is lined with the side chains of nonpolar amino acids. The bound fatty acid ligand is located in the interior of the protein and has a bent conformation, possibly reflecting the presence of several gauche bonds in the hydrocarbon tail. Our present interpretation of the electron density map suggests that the fatty acid is oriented with its carboxylate group facing the guanidinium group of Arg127, whereas the end of its hydrocarbon tail is in close proximity to Val106. The indole side chain of Trp83 forms the molecular framework around which the principal bend of the hydrocarbon chain occurs.     

Crystal structure of recombinant murine adipocyte lipid-binding protein.

Adipocyte lipid-binding protein (ALBP) is the adipocyte member of an intracellular hydrophobic ligand-binding protein family. ALBP is phosphorylated by the insulin receptor kinase upon insulin stimulation. The crystal structure of recombinant murine ALBP has been determined and refined to 2.5 A. The final R factor for the model is 0.18 with good canonical properties. Crystalline ALBP has a conformation which is essentially identical to that of intestinal fatty acid binding protein and myelin P2 protein. Although the crystal structure is of the apo- form, a cavity resembling that in other family members is present. It contains a number of bound and implied unbound water molecules and shows no large obvious portal to the external milieu. The cavity of ALBP, which by homology is the ligand-binding site, is formed by both polar and hydrophobic residues among which is tyrosine 19. Y19 is phosphorylated by the insulin receptor kinase as described in the accompanying paper [Buelt, M. K., Xu, Z., Banaszak, L. J., & Bernlohr, D. A. (1992) Biochemistry (following paper in this issue)]. By comparing ALBP with the earlier structural results on intestinal fatty acid binding protein, it is now possible to delineate conserved amino acids which help form the binding site in this family.     

A model for the regulation of D-3-phosphoglycerate dehydrogenase,a Vmax-type allosteric enzyme.

Escherichia coli D-3-phosphoglycerate dehydrogenase (ePGDH) is a tetramer of identical subunits that is allosterically inhibited by L-serine, the end product of its metabolic pathway. Because serine binding affects the velocity of the reaction and not the binding of substrate or cofactor, the enzyme is classified as of the Vmax type. Inhibition by a variety of amino acids and analogues of L-serine indicate that all three functional groups of serine are required for optimal interaction. Removing or altering any one functional group results in an increase in inhibitory concentration from micromolar to millimolar, and removal or alteration of any two functional groups removes all inhibitory ability. Kinetic studies indicate at least two serine-binding sites, but the crystal structure solved in the presence of bound serine and direct serine-binding studies show that there are a total of four serine-binding sites on the enzyme. However, approximately 85% inhibition is attained when only two sites are occupied. The three-dimensional structure of ePGDH shows that the serine-binding sites reside at the interface between regulatory domains of adjacent subunits. Two serine molecules bind at each of the two regulatory domain interfaces in the enzyme. When all four of the serines are bound, 100% inhibition of activity is seen. However, because the domain contacts are symmetrical, the binding of only one serine at each interface is sufficient to produce approximately 85% inhibition. The tethering of the regulatory domains to each other through multiple hydrogen bonds from serine to each subunit apparently prevents the body of these domains from undergoing the reorientation that must accompany a catalytic cycle. It is suggested that part of the conformational change may involve a hinge formed in the vicinity of the union of two antiparallel beta-sheets in the regulatory domains. The tethering function of serine, in turn, appears to prevent the substrate-binding domain from closing the cleft between it and the nucleotide-binding domain, which may be necessary to form a productive hydrophobic environment for hydride transfer. Thus, the structure provides a plausible model that is consistent with the binding and inhibition data and that suggests that catalysis and inhibition in this rare Vmax-type allosteric enzyme is based on the movement of rigid domains about flexible hinges.     

Evidence for multiple sites of ferricyanide reduction in chloroplasts

Various sites of ferricyanide reduction were studied in spinach chloroplasts. It was found that in the presence of dibromothymoquinone a fraction of ferricyanide reduction was dibromothymoquinone sensitive, implying that ferricyanide can be reduced by photosystem I as well as photosystem II. To separate ferricyanide reduction sites in photosystem II, orthophenanthroline and dichlorophenyl dimethylurea inhibitions were compared at various pH's. It was noted that at low pH ferricyanide reduction was not completely inhibited by orthophenanthroline. At high pH's, however, inhibition of ferricyanide reduction by orthophenanthroline was complete. It was found that varying concentration of orthophenanthroline at a constant pH showed different degrees of inhibition. In the study of ferricyanide reduction by photosystem II various treatments affecting plastocyanin were performed. It was found that Tween-20 or KCN treatments which inactivated plastocyanin did not completely inactivate ferricyanide reduction. These data support the conclusion that ferricyanide accepts electrons both before and after plastoquinone in photosystem II.Abbreviations DCMU 3-(3,4-dichlorophenyl)-1,1-dimethyurea - MV methyl viologen - DBMIB 2,5-dibromothymoquinone - DMBQ 2,6-dimethyl benzoquinone - OP 1,10-orthophenanthroline - TMPD tetramethyl-p-phenylenediamine - PS 1 photosystem I - PS II photosystem II - SN sucrose-sodium chloride chloroplasts Supported by NSF Grant BMS 74-19689.     

Selectivity of Ni(II) and Zn(II) binding to Sporosarcina pasteurii UreE, a metallochaperone in the urease assembly: a calorimetric and crystallographic study

Urease is a nickel-dependent enzyme that plays a critical role in the biogeochemical nitrogen cycle by catalyzing the hydrolysis of urea to ammonia and carbamate. This enzyme, initially synthesized in the apo form, needs to be activated by incorporation of two nickel ions into the active site, a process driven by the dimeric metallochaperone UreE. Previous studies reported that this protein can bind different metal ions in vitro, beside the cognate Ni(II). This study explores the metal selectivity and affinity of UreE from Sporosarcina pasteurii (Sp, formerly known as Bacillus pasteurii) for cognate [Ni(II)] and noncognate [Zn(II)] metal ions. In particular, the thermodynamic parameters of SpUreE Ni(II) and Zn(II) binding have been determined using isothermal titration calorimetry. These experiments show that two Ni(II) ions bind to the protein dimer with positive cooperativity. The high-affinity site involves the conserved solvent-exposed His¹⁰⁰ and the C-terminal His¹⁴⁵, whereas the low-affinity site comprises also the C-terminal His¹⁴⁷. Zn(II) binding to the protein, occurring in the same protein regions and with similar affinity as compared to Ni(II), causes metal-driven dimerization of the protein dimer. The crystal structure of the protein obtained in the presence of equimolar amounts of both metal ions indicates that the high-affinity metal binding site binds Ni(II) preferentially over Zn(II). The ability of the protein to select Ni(II) over Zn(II) was confirmed by competition experiments in solution as well as by analysis of X-ray anomalous dispersion data. Overall, the thermodynamics and structural parameters that modulate the metal ion specificity of the different binding sites on the protein surface of SpUreE have been established.     

The liver fatty acid binding protein - comparison of cavity properties of intracellular lipid-binding proteins

The crystal and solution structures of all of the intracellular lipid binding proteins (iLBPs) reveal a common -barrel framework with only small local perturbations. All existing evidence points to the binding cavity and a poorly delimited portal region as defining the function of each family member. The importance of local structure within the cavity appears to be its influence on binding affinity and specificity for the lipid. The portal region appears to be involved in the regulation of ligand exchange. Within the iLBP family, liver fatty acid binding protein or LFABP, has the unique property of binding two fatty acids within its internalized binding cavity rather than the commonly observed stoichiometry of one. Furthermore, LFABP will bind hydrophobic molecules larger than the ligands which will associate with other iLBPs. The crystal structure of LFABP contains two bound oleate molecules and provides the explanation for its unusual stoichiometry. One of the bound fatty acids is completely internalized and has its carboxylate interacting with an arginine and two serines. The second oleate represents an entirely new binding mode with the carboxylate on the surface of LFABP. The two oleates also interact with each other. Because of this interaction and its inner location, it appears the first oleate must be present before the second more external molecule is bound.