Assessment of IL-10, IL-1ß and TNF-α gene polymorphisms in patients with peri-implantitis and healthy controls

Molecular Biology Reports - Peri-implantitis (PI) is a multifactorial condition caused by the interactions of pathogens and the host immune response. Previous studies have demonstrated a...     

Highly Efficient Solar‐Driven Carbon Dioxide Reduction on Molybdenum Disulfide Catalyst Using Choline Chloride‐Based Electrolyte

Conversion of CO₂ to energy‐rich chemicals using renewable energy is of much interest to close the anthropogenic carbon cycle. However, the current photoelectrochemical systems are still far from being practically feasible. Here the successful demonstration of a continuous, energy efficient, and scalable solar‐driven CO₂ reduction process based on earth‐abundant molybdenum disulfide (MoS₂) catalyst, which works in synergy with an inexpensive hybrid electrolyte of choline chloride (a common food additive for livestock) and potassium hydroxide (KOH) is reported. The CO₂ saturated hybrid electrolyte utilized in this study also acts as a buffer solution (pH ≈ 7.6) to adjust pH during the reactions. This study reveals that this system can efficiently convert CO₂ to CO with solar‐to‐fuel and catalytic conversion efficiencies of 23% and 83%, respectively. Using density functional theory calculations, a new reaction mechanism in which the water molecules near the MoS₂ cathode act as proton donors to facilitate the CO₂ reduction process by MoS₂ catalyst is proposed. This demonstration of a continuous, cost‐effective, and energy efficient solar driven CO₂ conversion process is a key step toward the industrialization of this technology.     

Hyaluronic acid with or without bone marrow derived-mesenchymal stem cells improves osteoarthritic knee changes in rat model: a preliminary report

Despite being a complex degenerative joint disease, studies on osteoarthritis (OA) suggest that its progression can be reduced by the use of hyaluronic acid (HA) or mesenchymal stem cells (MSC). The present study thus aims to examine the effects of MSC, HA and the combination of HA-MSC in treating OA in rat model. The histological observations using O'Driscoll score indicate that it is the use of HA and MSC independently and not their combination that delays the progression of OA. In conclusion, the preliminary study suggest that the use of either HA or MSCs effectively reduces OA progression better than their combined use.     

Prospects of implant with locking plate in fixation of subtrochanteric fracture: experimental demonstration of its potential benefits on synthetic femur model with supportive hierarchical nonlinear hyperelastic finite element analysis

Background

Effective fixation of fracture requires careful selection of a suitable implant to provide stability and durability. Implant with a feature of locking plate (LP) has been used widely for treating distal fractures in femur because of its favourable clinical outcome, but its potential in fixing proximal fractures in the subtrochancteric region has yet to be explored. Therefore, this comparative study was undertaken to demonstrate the merits of the LP implant in treating the subtrochancteric fracture by comparing its performance limits against those obtained with the more traditional implants; angle blade plate (ABP) and dynamic condylar screw plate (DCSP).

Materials and Methods

Nine standard composite femurs were acquired, divided into three groups and fixed with LP (n?=?3), ABP (n?=?3) and DCSP (n?=?3). The fracture was modeled by a 20?mm gap created at the subtrochanteric region to experimentally study the biomechanical response of each implant under both static and dynamic axial loading paradigms. To confirm the experimental findings and to understand the critical interactions at the boundaries, the synthetic femur/implant systems were numerically analyzed by constructing hierarchical finite element models with nonlinear hyperelastic properties. The predictions from the analyses were then compared against the experimental measurements to demonstrate the validity of each numeric model, and to characterize the internal load distribution in the femur and load bearing properties of each implant.

Results

The average measurements indicated that the constructs with ABP, DCPS and LP respectively had overall stiffness values of 70.9, 110.2 and 131.4?N/mm, and exhibited reversible deformations of 12.4, 4.9 and 4.1?mm when the applied dynamic load was 400?N and plastic deformations of 11.3, 2.4 and 1.4?mm when the load was 1000?N. The corresponding peak cyclic loads to failure were 1100, 1167 and 1600?N. The errors between the displacements measured experimentally or predicted by the nonlinear hierarchical hyperelastic model were less than 18?%. In the implanted femur heads, the principal stresses were spatially heterogeneous for ABP and DCSP but more homogenous for LP, meaning LP had lower stress concentrations.

Conclusion

When fixed with the LP implant, the synthetic femur model of the subtrochancteric fracture consistently exceeds in the key biomechanical measures of stability and durability. These capabilities suggest increased resistance to fatigue and failure, which are highly desirable features expected of functional implants and hence make the LP implant potentially a viable alternative to the conventional ABP or DCSP in the treatment of subtrochancteric femur fractures for the betterment of clinical outcome.     

Emulsifying Activity, Particle Uniformity and Rheological Properties of a Natural Polysaccharide-Protein Biopolymer from Durian Seed

Polysaccharide-protein gums are complex polymers with many applications in emulsion and emulsion-based products. It is crucial to enclose a concept on understanding of functional properties of polysaccharide-protein biopolymer in order to select the appropriate one based on the application scope. The main objective of the current study was to investigate the effect of three extraction variables on the surface activity, particle uniformity, apparent viscosity, and protein content of a natural polysaccharide-protein biopolymer from durian fruit seed. Three extraction variables namely water: seed (W/S) ratio (20:1?C60:1), temperature (25.0?C85.0?°C) and pH (4.0?C10.0) were considered as independent variables. The results indicated that durian seed gum induced very low viscosity (0.93?C4.98?mPa.s) with pseudoplastic rheological behavior in the aqueous system. The current study revealed that the extraction variables had the most significant (p?<?0.05) effect on the emulsifying surface activity of the natural biopolymer from durian fruit seed. This might be due to the significant (p?<?0.05) effect of the proteineous constituent present in the chemical structure of the biopolymer from durian fruit seed. The aqueous extraction variables showed the most and least significant (p?<?0.05) effect on the specific surface area and protein content, respectively. Among all extraction variables, W/S ratio and pH exhibited the highest and lowest significant (p?<?0.05) effect on the physicochemical and functional properties of the natural biopolymer from durian fruit seed.     

Detection of combined genomic variants in a Jordanian family with familial non-autoimmune hyperthyroidism

Five patients, four brothers and their paternal aunt, presented with a history of overt hyperthyroidism and goiter. Hyperthyroidism in this family was remarkable for its poor response to carbimazole (30–50 mg/d). The thyroid ultrasound showed a diffusely enlarged gland in all the affected members, and thyroid stimulating antibodies (TSAB) were negative. Screening for germline mutations in thyroid stimulating hormone (TSH) receptor (TSHR) gene was performed by direct sequencing of genomic DNA extracted from peripheral blood leukocytes of all family members. The sequence analysis of all TSHR gene exons and intron borders revealed two genomic variants. The first was a single nucleotide polymorphism (SNP) within exon seven (Asn187Asn), whereas the other was located in intron seven (IVS7+68T>G). All affected members, two asymptomatic brothers with sub-clinical hyperthyroidism, and their father were heterozygous for those two genomic variants. Anti-thyroid drug treatment for several months successfully relieved symptoms in one subject, whereas the remaining patients required total thyroidectomy to control their disease. This is the first Jordanian family with familial non-autoimmune hyperthyroidism, with mutations affecting the TSHR gene.     

Translocations of Chromosome End-Segments and Facultative Heterochromatin Promote Meiotic Ring Formation in Evening Primroses

Due to reciprocal chromosomal translocations, many species of Oenothera (evening primrose) form permanent multichromosomal meiotic rings. However, regular bivalent pairing is also observed. Chiasmata are restricted to chromosomal ends, which makes homologous recombination virtually undetectable. Genetic diversity is achieved by changing linkage relations of chromosomes in rings and bivalents via hybridization and reciprocal translocations. Although the structural prerequisite for this system is enigmatic, whole-arm translocations are widely assumed to be the mechanistic driving force. We demonstrate that this prerequisite is genome compartmentation into two epigenetically defined chromatin fractions. The first one facultatively condenses in cycling cells into chromocenters negative both for histone H3 dimethylated at lysine 4 and for C-banding, and forms huge condensed middle chromosome regions on prophase chromosomes. Remarkably, it decondenses in differentiating cells. The second fraction is euchromatin confined to distal chromosome segments, positive for histone H3 lysine 4 dimethylation and for histone H3 lysine 27 trimethylation. The end-segments are deprived of canonical telomeres but capped with constitutive heterochromatin. This genomic organization promotes translocation breakpoints between the two chromatin fractions, thus facilitating exchanges of end-segments. We challenge the whole-arm translocation hypothesis by demonstrating why reciprocal translocations of chromosomal end-segments should strongly promote meiotic rings and evolution toward permanent translocation heterozygosity. Reshuffled end-segments, each possessing a major crossover hot spot, can furthermore explain meiotic compatibility between genomes with different translocation histories.     

The sensitive to freezing3 mutation of Arabidopsis thaliana is a cold-sensitive allele of homomeric acetyl-CoA carboxylase that results in cold-induced cuticle deficiencies

The sfr3 mutation causes freezing sensitivity in Arabidopsis thaliana. Mapping, sequencing, and transgenic complementation showed sfr3 to be a missense mutation in ACC1, an essential gene encoding homomeric (multifunctional) acetyl-CoA carboxylase. Cuticle permeability was compromised in the sfr3 mutant when plants were grown in the cold but not in the warm. Wax deposition on the inflorescence stem of cold-grown sfr3 plants was inhibited and the long-chain components of their leaf cuticular wax were reduced compared with wild-type plants. Thus, freezing sensitivity of sfr3 appears, from these results, to be due to cuticular deficiencies that develop during cold acclimation. These observations demonstrated the essential role of the cuticle in tolerance to freezing and drought.     

Phenotypic and molecular identification of a novel thermophilic Anoxybacillus species: a lipase-producing bacterium isolated from a Malaysian hotspring

Eleven lipase-producing thermophilic bacteria strains were recently isolated from Kuala Woh Hot Spring, in Peninsular Malaysia. These strains have been qualitatively screened using Rhodamine B-olive oil plate agar. All strains showed lipase activity in the range of 0.56–2.62 U/ml. Their thermostabilities were then determined by incubation at 80°C for 30 min. Results showed that strain KW 6 and KW 12 produced relatively thermostable lipases, which retained 62 and 54% of their original activity, respectively. They were identified based on their morphological characteristics, biochemical tests and the Biolog system. Strain KW 12 showed exceptionally unique characteristics (over KW 6) being able to grow in a broad range of pH and temperature. It was further identified using 16S rRNA partial sequence analysis and the result of 16S rRNA partial sequence analysis identified KW 12 as Anoxybacillus kamchatkensis.