Point Mutations in Dimerization Motifs of the Transmembrane Domain Stabilize Active or Inactive State of the EphA2 Receptor Tyrosine Kinase

The EphA2 receptor tyrosine kinase plays a central role in the regulation of cell adhesion and guidance in many human tissues. The activation of EphA2 occurs after proper dimerization/oligomerization in the plasma membrane, which occurs with the participation of extracellular and cytoplasmic domains. Our study revealed that the isolated transmembrane domain (TMD) of EphA2 embedded into the lipid bicelle dimerized via the heptad repeat motif L⁵³⁵X₃G⁵³⁹X₂A⁵⁴²X₃V⁵⁴⁶X₂L⁵⁴⁹ rather than through the alternative glycine zipper motif A⁵³⁶X₃G⁵⁴⁰X₃G⁵⁴⁴ (typical for TMD dimerization in many proteins). To evaluate the significance of TMD interactions for full-length EphA2, we substituted key residues in the heptad repeat motif (HR variant: G539I, A542I, G553I) or in the glycine zipper motif (GZ variant: G540I, G544I) and expressed YFP-tagged EphA2 (WT, HR, and GZ variants) in HEK293T cells. Confocal microscopy revealed a similar distribution of all EphA2-YFP variants in cells. The expression of EphA2-YFP variants and their kinase activity (phosphorylation of Tyr⁵⁸⁸ and/or Tyr⁵⁹⁴) and ephrin-A3 binding were analyzed with flow cytometry on a single cell basis. Activation of any EphA2 variant is found to occur even without ephrin stimulation when the EphA2 content in cells is sufficiently high. Ephrin-A3 binding is not affected in mutant variants. Mutations in the TMD have a significant effect on EphA2 activity. Both ligand-dependent and ligand-independent activities are enhanced for the HR variant and reduced for the GZ variant compared with the WT. These findings allow us to suggest TMD dimerization switching between the heptad repeat and glycine zipper motifs, corresponding to inactive and active receptor states, respectively, as a mechanism underlying EphA2 signal transduction.     

Biosynthetic uniform 13C,15N-labelling of zervamicin IIB. Complete 13C and 15N NMR assignment.

Zervamicin IIB is a member of the alpha-aminoisobutyric acid containing peptaibol antibiotics. A new procedure for the biosynthetic preparation of the uniformly 13C- and 15N-enriched peptaibol is described This compound was isolated from the biomass of the fungus-producer Emericellopsis salmosynnemata strain 336 IMI 58330 obtained upon cultivation in the totally 13C, 15N-labelled complete medium. To prepare such a medium the autolysed biomass and the exopolysaccharides of the obligate methylotrophic bacterium Methylobacillus flagellatus KT were used. This microorganism was grown in totally 13C, 15N-labelled minimal medium containing 13C-methanol and 15N-ammonium chloride as the only carbon and nitrogen sources. Preliminary NMR spectroscopic analysis indicated a high extent of isotope incorporation (> 90%) and led to the complete 13C- and 15N-NMR assignment including the stereospecific assignment of Aib residues methyl groups. The observed pattern of the structurally important secondary chemical shifts of 1H(alpha), 13C=O and 13C(alpha) agrees well with the previously determined structure of zervamicin IIB in methanol solution.     

An estimate of spin diffusion in a spin subset: Application to iterative distance calculation from 3D 15N NOESY-HMQC

Summary A method for quantification of distances between amide hydrogens using only the 3D NOESY-HMQC experiment recorded on a ¹⁵N-labelled protein is presented. This method is based on an approximate expression of the NOE intensities between amide hydrogens obtained from continuum modelling of the non-amide spins; this expression is used in a distance calculation algorithm. The algorithm has been named CROWD, standing for Continuum approximation of Relaxati On path Ways between Dilute spins. This approximation as well as the CROWD algorithm are tested on a simulated case; the CROWD algorithm is then applied to experimental data, measured on a fragment of bacteriorhodopsin.     

Three-dimensional structure of ectatomin from Ectatomma tuberculatum ant venom

Summary Two-dimensional ¹H NMR techniques were used to determine the spatial structure of ectatomin, a toxin from the venom of the ant Ectatomma tuberculatum. Nearly complete proton resonance assignments for two chains of ectatomin (37 and 34 amino acid residues, respectively) were obtained using 2D TOCSY, DQF-COSY and NOESY experiments. The cross-peak volumes in NOESY spectra were used to define the local structure of the protein and generate accurate proton-proton distance constraints employing the MARDIGRAS program. Disulfide bonds were located by analyzing the global fold of ectatomin, calculated with the distance geometry program DIANA. These data, combined with data on the rate of exchange of amide protons with deuterium, were used to obtain a final set of 20 structures by DIANA. These structures were refined by unrestrained energy minimization using the CHARMm program. The resulting rms deviations over 20 structures (excluding the mobile N- and C-termini of each chain) are 0.75 ? for backbone heavy atoms, and 1.25 ? for all heavy atoms. The conformations of the two chains are similar. Each chain consists of two α-helices and a hinge region of four residues; this forms a hairpin structure which is stabilized by disulfide bridges. The hinge regions of the two chains are connected together by a third disulfide bridge. Thus, ectatomin forms a four-α-helical bundle structure.     

Buckwheat trypsin inhibitor with helical hairpin structure belongs to a new family of plant defence peptides

A new peptide trypsin inhibitor named BWI-2c was obtained from buckwheat (Fagopyrum esculentum) seeds by sequential affinity, ion exchange and reversed-phase chromatography. The peptide was sequenced and found to contain 41 amino acid residues, with four cysteine residues involved in two intramolecular disulfide bonds. Recombinant BWI-2c identical to the natural peptide was produced in Escherichia coli in a form of a cleavable fusion with thioredoxin. The 3D (three-dimensional) structure of the peptide in solution was determined by NMR spectroscopy, revealing two antiparallel α-helices stapled by disulfide bonds. Together with VhTI, a trypsin inhibitor from veronica (Veronica hederifolia), BWI-2c represents a new family of protease inhibitors with an unusual α-helical hairpin fold. The linker sequence between the helices represents the so-called trypsin inhibitory loop responsible for direct binding to the active site of the enzyme that cleaves BWI-2c at the functionally important residue Arg(19). The inhibition constant was determined for BWI-2c against trypsin (1.7×10(-1)0 M), and the peptide was tested on other enzymes, including those from various insect digestive systems, revealing high selectivity to trypsin-like proteases. Structural similarity shared by BWI-2c, VhTI and several other plant defence peptides leads to the acknowledgement of a new widespread family of plant peptides termed α-hairpinins.     

Two closely linked tomato HKT coding genes are positional candidates for the major tomato QTL involved in Na+/K+ homeostasis

The location of major quantitative trait loci (QTL) contributing to stem and leaf [Na⁺] and [K⁺] was previously reported in chromosome 7 using two connected populations of recombinant inbred lines (RILs) of tomato. HKT1;1 and HKT1;2, two tomato Na⁺‐selective class I‐HKT transporters, were found to be closely linked, where the maximum logarithm of odds (LOD) score for these QTLs located. When a chromosome 7 linkage map based on 278 single‐nucleotide polymorphisms (SNPs) was used, the maximum LOD score position was only 35 kb from HKT1;1 and HKT1;2. Their expression patterns and phenotypic effects were further investigated in two near‐isogenic lines (NILs): 157‐14 (double homozygote for the cheesmaniae alleles) and 157‐17 (double homozygote for the lycopersicum alleles). The expression pattern for the HKT1;1 and HKT1;2 alleles was complex, possibly because of differences in their promoter sequences. High salinity had very little effect on root dry and fresh weight and consequently on the plant dry weight of NIL 157‐14 in comparison with 157‐17. A significant difference between NILs was also found for [K⁺] and the [Na⁺]/[K⁺] ratio in leaf and stem but not for [Na⁺] arising a disagreement with the corresponding RIL population. Their association with leaf [Na⁺] and salt tolerance in tomato is also discussed.     

Fusion Peptide Interaction with Lipid Bilayer: Modeling with Monte Carlo Simulation and Continuum Electrostatics Calculation

Abstract

Conformation of 20-residue peptide E5, an analog of the fusion peptide of influenza virus hemagglutinin, was explored by Monte-Carlo technique starting with the fully buried in the membrane ideal α-helix. The lipid bilayer (of 30 Å width) together with surrounding water were modeled by the atomic solvation parameters. During the simulation, residues 2–18 of the peptide retained α-helical conformation, and the peptide was found to be partially immersed into the bilayer. In the resulting low-energy conformers, the N-terminus was buried inside the membrane, its position with respect to the bilayer surface (Z_NT) being varied from 2.5 to 7.5 Å, and the orientation of the helical axis relative to the membrane plane (Θ) – from 10 to 35°. The low-energy conformers (below -200kcal/mol) were clustered in the space (Z_NT, Θ) into 4 groups. To select low-energy states of the peptide compatible with NMR data, we calculated pKa values of E5 ionizable groups and compared them with the experimental values. It was shown that the best correlation coefficient (0.87) and rmsd (0.68 in pH units) were obtained for the group of states which is characterized by Θ = 15–19° and Z_NT = 3.5–4.5Å.     

Modeling of Peptides in Implicit Membrane-Mimetic Media

Abstract

Lipid bilayer plays a crucial role in folding of membrane peptides and their stabilization in the membrane-bound state. Correct treatment of the media effects is thus essential for realistic simulations of peptides in bilayers. Previously (Volynsky et al., 1999), we proposed an efficient solvation model which mimics heterogeneous membrane-water system. The model is based on combined employment of atomic solvation parameters for water and hydrocarbon, which approximate hydrated headgroups and acyl chains of lipids, respectively. In this study, the model is employed in non-restrained Monte Carlo simulations of several peptides: totally apolar 20-residue poly-L-Leu, hydrophobic peptide with polar edges, and strongly amphiphilic pep-tide. The principal goals are: to explore energy landscape of these peptides in membrane; to characterize the structures of low-energy states and their orientations with respect to the bilayer. Simulations were performed starting from different structures (unordered or helical) and orientations. It was found that the membrane environment significantly promotes an α-helical conformation for all the peptides, while their energetically favourable orientations are quite different. Thus, poly-Leu was immobilized inside the membrane, the hydrophobic peptide with polar termini adapted transbilayer orientation, whereas the amphiphilic peptide stayed on the lipid-water interface in peripherial orientation. Energy barriers between different states were characterized. The computational results were compared with the experimental structural data.     

Preparation of pro-oncogenic mutant forms V659E and V659Q of the transmembrane domain of receptor protein kinase ErbB2 for structural studies

Receptor tyrosine kinases (RTKs) play an important role in intercellular signal transduction through the plasma membrane. RTKs are integral membrane proteins activated upon lateral homo- or heterodimerization involving their transmembrane domain. The polymorphism and mutations in RTK transmembrane (TM) domains are directly associated with a number of human diseases. The family of epidermal growth factor receptors, ErbB, is an important class of RTKs participating in human cell growth, development, and differentiation. In order to investigate the influence of pathogenic mutations in ErbB TM domains on the structural and dynamic properties of these receptors and on specific interactions of their TM domains, we have developed highly effective systems of bacterial expression and purification of recombinant transmembrane fragments ErbB2_641–684 with pro-oncogenic substitution of Val⁶⁵⁹ by Glu or Gln. Transmembrane fragments were obtained in Escherichia coli BL21 (DE3) pLysS as a fusion protein with thioredoxin A. The purification protocol includes immobilized metal ion affinity chromatography (IMAC) and cation-exchange chromatography. The application of the protease Thrombin for hybrid protein hydrolysis considerably reduces financial expenditure as compared to the analogous protocols. The described techniques allow obtaining the milligram quantities of ErbB2 transmembrane fragments and its ¹⁵N-/[¹⁵N, ¹³C]-isotope-labeled derivatives for the analysis of their spatial structure using high-resolution heteronuclear NMR spectroscopy in a membrane-mimicking milieu.     

Production of endothelial progenitor cells obtained from human Wharton's jelly using different culture conditions

Endothelial progenitor cells (EPC) participate in revascularization and angiogenesis. EPC can be cultured in vitro from mononuclear cells of peripheral blood, umbilical cord blood or bone marrow; they also can be transdifferentiated from mesenchymal stem cells (MSC). We isolated EPCs from Wharton's jelly (WJ) using two methods. The first method was by obtaining MSC from WJ and characterizing them by flow cytometry and their adipogenic and osteogenic differentiation, then applying endothelial growth differentiating media. The second method was by direct culture of cells derived from WJ into endothelial differentiating media. EPCs were characterized by morphology, Dil-LDL uptake/UEA-1 immunostaining and testing the expression of endothelial markers by flow cytometry and RT-PCR. We found that MSC derived from WJ differentiated into endothelial-like cells using simple culture conditions with endothelium induction agents in the medium.