A covalently bound photoisomerizable agonist. Comparison with reversibly bound agonists at electrophorus electroplaques

After disulphide bonds are reduced with dithiothreitol, trans-3- (α-bromomethyl)-3’-[α- (trimethylammonium)methyl]azobenzene (trans-QBr) alkylates a sulfhydryl group on receptors. The membrane conductance induced by this “tethered agonist” shares many properties with that induced by reversible agonists. Equilibrium conductance increases as the membrane potential is made more negative; the voltage sensitivity resembles that seen with 50 [mu]M carbachol. Voltage- jump relaxations follow an exponential time-course; the rate constants are about twice as large as those seen with 50 μM carbachol and have the same voltage and temperature sensitivity. With reversible agonists, the rate of channel opening increases with the frequency of agonist-receptor collisions: with tethered trans-Qbr, this rate depends only on intramolecular events. In comparison to the conductance induced by reversible agonists, the QBr-induced conductance is at least 10-fold less sensitive to competitive blockade by tubocurarine and roughly as sensitive to “open-channel blockade” bu QX-222. Light-flash experiments with tethered QBr resemble those with the reversible photoisomerizable agonist, 3,3’,bis-[α-(trimethylammonium)methyl]azobenzene (Bis-Q): the conductance is increased by cis {arrow} trans photoisomerizations and decreased by trans {arrow} cis photoisomerizations. As with Bis-Q, ligh-flash relaxations have the same rate constant as voltage-jump relaxations. Receptors with tethered trans isomer. By comparing the agonist-induced conductance with the cis/tans ratio, we conclude that each channel’s activation is determined by the configuration of a single tethered QBr molecule. The QBr-induced conductance shows slow decreases (time constant, several hundred milliseconds), which can be partially reversed by flashes. The similarities suggest that the same rate-limiting step governs the opening and closing of channels for both reversible and tethered agonists. Therefore, this step is probably not the initial encounter between agonist and receptor molecules.     

Palatability and feeding preferences of Uresiphita maorialis (Lepidoptera: Crambidae) for three Sophora species

In a three-hour bioassay, we tested the palatability and feeding preferences of Uresiphita maorialis (kōwhai moth) for Sophora tetraptera, Sophora microphylla and Sophora prostrata. Palatability tests showed no differences among the Sophora species. Feeding preferences, on the other hand, showed that S. tetraptera and S. microphylla leaves are preferred over S. prostrata leaves. Our results support our field observations in Wellington city parks and gardens showing that S. tetraptera and S. microphylla plants frequently have higher densities of larvae than S. prostrata.     

Biodeterioration of Mayan buildings at uxmal and tulum,Mexico

Uxmal and Tulum are two important Mayan sites in the Yucatan peninsula. The buildings are mainly composed of limestone and grey/black discoloration is seen on exposed walls and copious greenish biofilms on inner walls. The principal microorganisms detected on interior walls at both Uxmal and Tulum were cyanobacteria; heterotrophic bacteria and filamentous fungi were also present. A dark‐pigmented mitosporic fungus and Bacillus cereus, both isolated from Uxmal, were shown to be acidogenic in laboratory cultures. Cyanobacteria belonging to rock‐degrading genera Synechocystis and Gloeocapsa were identified at both sites. Surface analysis previously showed that calcium ions were present in the biofilms on buildings at Uxmal and Tulum, suggesting the deposition of biosolubilized stone. Apart from their potential to degrade the substrate, the coccoid cyanobacteria supply organic nutrients for bacteria and fungi, which can produce organic acids, further increasing stone degradation.     

The role of fish-poultry integration on fish growth performance,yields and economic benefits among smallholder farmers in sub-Saharan Africa,Tanzania

Aquaculture practices from sub-Saharan Africa are characterised by low production, owing to improper technology. Production can be increased through integrating fish farming with other existing on-farm activities, particularly livestock husbandry. We assessed the role of fish-poultry integration on all male Nile tilapia, Oreochromis niloticus growth performance, yields and economic benefits among smallholder farmers in sub-Saharan Africa, Tanzania. The study also compared phytoplankton species composition, abundance and biomass between the fish-poultry integration and non-integrated system. After 180 days of the experiment, all male O. niloticus cultured under fish-poultry integration exhibited significantly higher growth rates than those in the non-integrated system (p < 0.05). Gross fish yield (GFY), net fish yield (NFY) and net annual yields (NAY) obtained from fish-poultry integration were significantly higher than those from non-integrated system (p < 0.05). Partial enterprise budget analysis revealed that fish-poultry integration was more profitable than the non-integrated system. Moreover, fish-poultry integrated system produced significantly higher phytoplankton abundance and biomass than those from the non-integrated system. Results demonstrate that rural smallholder farmers can achieve higher growth rate, farm net yields and income by integrating all male O. niloticus with other on-farm activities than practising a stand-alone fish culture system.     

Establishment of a biomimetic device based on tri-layer polymer actuators--propulsion fins

We propose to use bending type tri-layer polymer actuators as propulsion fins for a biomimetic device consisting of a rigid body, like a box fish having a carapace, and paired fins running through the rigid body, like a fish having pectoral fins. The fins or polymer bending actuators can be considered as individually controlled flexible membranes. Each fin is activated with sinusoidal inputs such that there is a phase lag between the movements of successive fins to create enough thrust force for propulsion. Eight fins with 0.125 aspect ratio have been used along both sides of the rigid body to move the device in the direction perpendicular to the longitudinal axis of the body. The designed device with the paired fins was successfully tested, moving in an organic solution consisting of solvent, propylene carbonate (PC), and electrolyte. The design procedure outlined in this study is offered as a guide to making functional devices based on polymer actuators and sensors.     

The effect of high dose digoxin on cytokines in healthy dogs

BACKGROUND: Tumor necrosis factor (TNF)-alpha and interleukin (IL)-1beta are pro-inflammatory cytokines, causing myocardial dysfunction and a negative inotropic effect. The drugs used to treat heart failure affect the production of cytokines. Digoxin, on which this study was focused, is one of the drugs for the treatment of heart failure. AIM: The present study was designed to examine the early effects of high doses of digoxin on the production of cytokines in healthy dogs. METHODS: Digoxin was given parenterally to dogs at 0.15 mg/kg. IL-1beta and TNF-alpha production and levels of digoxin in the serum were measured 0, 12, 24, 48, and 72 h following administration of digoxin. RESULTS: As the levels of serum digoxin taken at 12, 24, 48, and 72 h of administration were considered significantly high compared with preceding values (p < 0.001), no notable change in serum IL-1beta and TNF-alpha levels was observed. CONCLUSIONS: These results suggest that high doses of digoxin do not cause a significant cytokine production in heart muscle in the early phase.     

Association of male pattern baldness with angiographic coronary artery disease severity and collateral development

Objective

We aimed to investigate whether there is an association between male pattern baldness and angiographic coronary artery disease (CAD) severity and collateral development, which has not been reported previously.

Methods

Coronary arteriograms, CAD risk factors, lipid parameters and presence and severity of baldness in 511 male patients were prospectively evaluated. Baldness was classified into five groups. Severity of CAD was evaluated with the Gensini scoring system and collateral development with Rentrop scores.

Results

Although subjects with a higher Gensini score had more frequent and severe baldness, they were older than the group with lower Gensini scores. Bald patients had a higher Gensini score when compared with their non-bald counterparts. In univariate analysis, age more than 60, body mass index more than 30, smoking and baldness were predictors of high Gensini scores. In multivariate analysis, only age more than 60, body mass index more than 30 and smoking were independent predictors of a high Gensini score. There were no differences in terms of presence and severity of baldness in subjects with and without adequate collateral development.

Conclusions

There was no relation between presence, severity and age of occurrence of male pattern baldness and Gensini and Rentrop scores, which are important measures of presence and severity of CAD.     

Simulation of deformable models with the Poisson equation

In this paper, we present a new methodology for the deformation of soft objects by drawing an analogy between the Poisson equation and elastic deformation from the viewpoint of energy propagation. The potential energy stored due to a deformation caused by an external force is calculated and treated as the source injected into the Poisson system, as described by the law of conservation of energy. An improved Poisson model is developed for propagating the energy generated by the external force in a natural manner. An autonomous cellular neural network (CNN) model is established by using the analogy between the Poisson equation and CNN to solve the Poisson model for the real-time requirement of soft object deformation. A method is presented to derive the internal forces from the potential energy distribution. The proposed methodology models non-linear materials with the non-linear Poisson equation and thus non-linear CNN, rather than geometric non-linearity. It not only deals with large-range deformations, but also accommodates isotropic, anisotropic and inhomogeneous materials by simply modifying constitutive coefficients. A haptic virtual reality system has been developed for deformation simulation with force feedback. Examples are presented to demonstrate the efficiency of the proposed methodology.