Fluorine‐Free Noble Salt Anion for High‐Performance All‐Solid‐State Lithium–Sulfur Batteries

Amongst post‐Li‐ion battery technologies, lithium–sulfur (Li–S) batteries have captured an immense interest as one of the most appealing devices from both the industrial and academia sectors. The replacement of conventional liquid electrolytes with solid polymer electrolytes (SPEs) enables not only a safer use of Li metal (Li°) anodes but also a flexible design in the shape of Li–S batteries. However, the practical implementation of SPEs‐based all‐solid‐state Li–S batteries (ASSLSBs) is largely hindered by the shuttling effect of the polysulfide intermediates and the formation of dendritic Li° during the battery operation. Herein, a fluorine‐free noble salt anion, tricyanomethanide [C(CN)₃^?, TCM^?], is proposed as a Li‐ion conducting salt for ASSLSBs. Compared to the widely used perfluorinated anions {e.g., bis(trifluoromethanesulfonyl)imide anion, [N(SO₂CF₃)₂)]^?, TFSI^?}, the LiTCM‐based electrolytes show decent ionic conductivity, good thermal stability, and sufficient anodic stability suiting the cell chemistry of ASSLSBs. In particular, the fluorine‐free solid electrolyte interphase layer originating from the decomposition of LiTCM exhibits a good mechanical integrity and Li‐ion conductivity, which allows the LiTCM‐based Li–S cells to be cycled with good rate capability and Coulombic efficiency. The LiTCM‐based electrolytes are believed to be the most promising candidates for building cost‐effective and high energy density ASSLSBs in the near future.     

Subthreshold sodium current from rapidly inactivating sodium channels drives spontaneous firing of tuberomammillary neurons

A role for "persistent," subthreshold, TTX-sensitive sodium current in driving the pacemaking of many central neurons has been proposed, but this has been impossible to test pharmacologically. Using isolated tuberomammillary neurons, we assessed the role of subthreshold sodium current in pacemaking by performing voltage-clamp experiments using a cell's own pacemaking cycle as voltage command. TTX-sensitive sodium current flows throughout the pacemaking cycle, even at voltages as negative as -70 mV, and this current is sufficient to drive spontaneous firing. When sodium channels underlying transient current were driven into slow inactivation by rapid stimulation, persistent current decreased in parallel, suggesting that persistent sodium current originates from subthreshold gating of the same sodium channels that underlie the phasic sodium current. This behavior of sodium channels may endow all neurons with an intrinsic propensity for rhythmic, spontaneous firing.     

Formulation and in vitro transfection efficiency of poly (D, L-lactideco-glycolide) microspheres containing plasmid DNA for gene delivery

The stability, in vitro release, and in vitro cell transfection efficiency of plasmid DNA (pDNA) poly (D,L.-lactide-co-glycolide) (PLGA) microsphere formulations were investigated. PLGA microspheres containing free and polylysine (PLL)-complexed pDNA were prepared by a water-oil-water solvent extraction/evaporation technique. Encapsulation enhanced the retention of the supereoiled structure of pDNA as determined by gel electrophoresis. PLL complexation of pDNA prior to encapsulation increased both the stability of the supercoiled form and the encapsulation efficiency. Free pDNA was completely degraded after exposure to DNase while encapsulation protected the pDNA from enzymatic degradation. Rapid initial in vitro release of pDNA was obtained from microspheres containing free pDNA. while the release from microspheres containing PLL-complexed pDNA was sustained for more than 42 days. Bioactivity of encapsulated pDNA determined by in vitro cell transfection using Chinese hamster ovary cells (CHO) showed that the bioactivity of encapsulated pDNA was retained in both formulations but to a greater extent with PLL-complexed pDNA microspheres. These results demonstrated that PLGA microspheres could be used to formulate a controlledrelease delivery system for pDNA that can protect the pDNA from DNase degradation without loss of functional activity.     

Dibutyltin activates MAP kinases in human natural killer cells,in vitro

Previous studies have shown that dibutyltin (DBT) interferes with the function of human natural killer (NK) cells, diminishing their capacity to destroy tumor cells, in vitro. DBT is a widespread environmental contaminant and has been found in human blood. As NK cells are our primary immune defense against tumor cells, it is important to understand the mechanism by which DBT interferes with their function. The current study examines the effects of DBT exposures on key enzymes in the signaling pathway that regulates NK responsiveness to tumor cells. These include several protein tyrosine kinases (PTKs), mitogen-activated protein kinases (MAPKs), and mitogen-activated protein kinase kinases (MAP2Ks). The results showed that in vitro exposures of NK cells to DBT had no effect on PTKs. However, exposures to DBT for as little as 10 min were able to increase the phosphorylation (activation) of the MAPKs. The DBT-induced activations of these MAPKs appear to be due to DBT-induced activations of the immediate upstream activators of the MAPKs, MAP2Ks. The results suggest that DBT-interference with the MAPK signaling pathway is a consequence of DBT exposures, which could account for DBT-induced decreases in NK function.     

Differences in the fitness of two diverse wild-type human immunodeficiency virus type 1 isolates are related to the efficiency of cell binding and entry

The ability of one primary human immunodeficiency virus type 1 (HIV-1) isolate to outcompete another in primary CD4+ human lymphoid cells appears to be mediated by the efficiency of host cell entry. This study was designed to test the role of entry on fitness of wild-type HIV-1 isolates (e.g., replicative capacity) and to examine the mechanism(s) involved in differential entry efficiency. The gp120 coding regions of two diverse HIV-1 isolates (the more-fit subtype B strain, B5-91US056, and less-fit C strain, C5-97ZA003) were cloned into a neutral HIV-1 backbone by using a recently described yeast cloning technique. The fitness of the primary B5 HIV-1 isolates and its env gene cloned into the NL4-3 laboratory strain had similar fitness, and both were more fit than the C5 primary isolate and its env/NL4-3 chimeric counterpart. Increased fitness of the B5 over C5 virus was mediated by the gp120 coding region of the env gene. An increase in binding/fusion, as well as decreased sensitivity to entry inhibitors (PSC-RANTES and T-20), was observed in cell fusion assays mediated by B5 gp120 compared to C5 gp120. Competitive binding assays using a novel whole virus-cell system indicate that the primary or chimeric B5 had a higher avidity for CD4/CCR5 on host cells than the C5 counterpart. This increased avidity of an HIV-1 isolate for its cell receptors may be a significant factor influencing overall replicative capacity or fitness.     

Rear Surface Passivation for Ink-Based,Submicron CuIn(S,Se)2 Solar Cells

A N, N-dimethylformamide and thiourea-based route is developed to fabricate submicron (0.55 and 0.75 µm) thick CuIn(S,Se)₂ (CISSe) thin films for photovoltaic applications, addressing challenges of material usage, throughput, and manufacturing costs. However, reducing the absorber film thickness below 1 µm in a regular CISSe solar cell decreases the device efficiency due to losses at the highly-recombinative, and mediocre-reflective Mo/CISSe rear interface. For the first time, to mitigate the rear recombination losses, a novel rear contacting structure involving a surface passivation layer and point contact openings is developed for solution processed CISSe films and demonstrated in tangible devices. An atomic layer deposited Al₂O₃ film is employed to passivate the Mo/CISSe rear surface while precipitates formed via chemical bath deposition of CdS are used to generate nanosized point openings. Consequently, Al₂O₃ passivated CISSe solar cells show an increase in the open-circuit voltage (V_OC) and short-circuit current density when compared to reference cells with equivalent absorber thicknesses. Notably, a V_OC increase of 59 mV contributes to active area efficiencies of 14.2% for rear passivated devices with 0.75 µm thick absorber layers, the highest reported value for submicron-based solution processed, low bandgap CISSe solar cells.     

Bipyrimidine ruthenium(II) arene complexes: structure, reactivity and cytotoxicity

The synthesis and characterization of complexes [(η(6)-arene)Ru(N,N')X][PF(6)], where arene is para-cymene (p-cym), biphenyl (bip), ethyl benzoate (etb), hexamethylbenzene (hmb), indane (ind) or 1,2,3,4-tetrahydronaphthalene (thn), N,N' is 2,2'-bipyrimidine (bpm) and X is Cl, Br or I, are reported, including the X-ray crystal structures of [(η(6)-p-cym)Ru(bpm)I][PF(6)], [(η(6)-bip)Ru(bpm)Cl][PF(6)], [(η(6)-bip)Ru(bpm)I][PF(6)] and [(η(6)-etb)Ru(bpm)Cl][PF(6)]. Complexes in which N,N' is 1,10-phenanthroline (phen), 1,10-phenanthroline-5,6-dione or 4,7-diphenyl-1,10-phenanthroline (bathophen) were studied for comparison. The Ru(II) arene complexes undergo ligand-exchange reactions in aqueous solution at 310?K; their half-lives for hydrolysis range from 14 to 715?min. Density functional theory calculations on [(η(6)-p-cym)Ru(bpm)Cl][PF(6)], [(η(6)-p-cym)Ru(bpm)Br][PF(6)], [(η(6)-p-cym)Ru(bpm)I][PF(6)], [(η(6)-bip)Ru(bpm)Cl][PF(6)], [(η(6)-bip)Ru(bpm)Br][PF(6)] and [(η(6)-bip)Ru(bpm)I][PF(6)] suggest that aquation occurs via an associative pathway and that the reaction is thermodynamically favourable when the leaving ligand is I?>?Br?≈?Cl. pK (a)* values for the aqua adducts of the complexes range from 6.9 to 7.32. A binding preference for 9-ethylguanine (9-EtG) compared with 9-ethyladenine (9-EtA) was observed for [(η(6)-p-cym)Ru(bpm)Cl][PF(6)], [(η(6)-hmb)Ru(bpm)Cl](+), [(η(6)-ind)Ru(bpm)Cl](+), [(η(6)-thn)Ru(bpm)Cl](+), [(η(6)-p-cym)Ru(phen)Cl](+) and [(η(6)-p-cym)Ru(bathophen)Cl](+) in aqueous solution at 310?K. The X-ray crystal structure of the guanine complex [(η(6)-p-cym)Ru(bpm)(9-EtG-N7)][PF(6)](2) shows multiple hydrogen bonding. Density functional theory calculations show that the 9-EtG adducts of all complexes are thermodynamically preferred compared with those of 9-EtA. However, the bmp complexes are inactive towards A2780 human ovarian cancer cells. Calf thymus DNA interactions for [(η(6)-p-cym)Ru(bpm)Cl][PF(6)] and [(η(6)-p-cym)Ru(phen)Cl][PF(6)] consist of weak coordinative, intercalative and monofunctional coordination. Binding to biomolecules such as glutathione may play a role in deactivating the bpm complexes.     

Energy and Mass Exchange Over Incomplete Vegetation Cover

Competition for fresh water between agriculture and domestic and industrial uses is increasing worldwide. This is forcing subsistence and commercial agriculture to produce more with less water. Consequently, it is crucial to properly and efficiently manage water resources. This requires accurate determination of crop water loss into the atmosphere, which is greatly influenced by the exchange of energy and mass between the surface and the atmosphere. Measurement of these exchange processes can best be accomplished by micrometeorological methods. However, most micrometeorological methods are very expensive, difficult to set up, require extensive post-data collection corrections and/or involve a high degree of empiricism. This review discusses estimation of evapotranspiration using relatively inexpensive micrometeorological methods in temperature-variance (TV), surface renewal (SR) and mathematical models. The TV and SR methods use high frequency air temperature measurements above a surface to estimate sensible heat flux (H). The latent heat flux (λE), and hence evapotranspiration, is calculated as a residual of the shortened surface energy balance using measured or estimated net radiation and soil heat flux, assuming surface energy balance closure is met. For crops with incomplete cover, the disadvantage of these methods is that they do not allow separation of evapotranspiration into soil evaporation and plant transpiration. The mathematical models (single- and dual-source) involve a combination of radiation and resistance equations to determine evapotranspiration from inputs of automatic weather station observations. Single-source models (Penman-Monteith type equations) are used to determine evapotranspiration over homogeneous surfaces. The dual-source models, basically an extension of single-source models, determine soil evaporation and plant transpiration separately over heterogeneous or sparse vegetation. These mathematical models have also been modified to accommodate inputs of remotely-sensed radiometric surface temperatures that enable estimation of evapotranspiration on a regional and global scale.