MicroRNA signature in hepatocellular carcinoma patients: identification of potential markers

MicroRNAs (miRNAs) play important roles in liver pathologies and they are potential biomarkers for diagnosis of liver diseases progression. Changes in miRNA sera expression can be used as non-invasive biomarkers for hepatocellular carcinoma (HCC). The aim of the study was to identify the miRNome profiling of HCC and its diagnostic value in distinguishing HCC from healthy individuals. Expression profiles of miRNAs in serum samples of 20 HCC patients and 10 healthy controls were detected. Whole miRNome profiling was done using next generation sequencing. Receiver operating characteristic (ROC) analysis was performed to assess the diagnostic performance of the deregulated miRNAs for discriminating HCC cases from healthy controls. MiRNA 142 was highly expressed in HCC (P value?=?0.023) while miRNAs 191, 22, and 126 were higher in the controls (P value?=?0.005, 0.034, 0.010 respectively). We have identified 5 novel miRNAs and they were highly expressed in HCC than controls. Analysis of ROC curve demonstrated that these deregulated miRNAs can be used as a reliable biomarker for detection of HCC with high diagnostic accuracy (AUC?=?0.93). We have detected a panel of serum miRNAs that can be used as a reliable noninvasive screening biomarker of HCC. The study recommends further research to shed light on a possible role of the newly discovered novel miRNAs in HCC pathogenesis.

     

Production of pullulanase by free and immobilized cells of <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> NRC22 in batch and continuous cultures

The production of extracellular pullulanase by Bacillus licheniformis NRC22 was investigated using different fermentation modes. In batch culture maximal enzyme activity of 18 U/ml was obtained after 24 h of growth. In continuous fermentation by the free cells, maximal reactor productivity (4.15 KU/l/h) with enzyme concentration of 14.8 U/ml and specific productivity of 334.9 U/g wet cells/h was attained at a dilution rate of 0.28/h, over a period of 25 days. B. licheniformis NRC22 cells were immobilized on Ca-alginate. The immobilization conditions with respect to matrix concentration and cell load was optimized for maximal enzyme production. In repeated batch operation, the activity of the immobilized cells was stable during the 10 cycles and the activity remained between 9.8 and 7.7 U/ml. Continuous production of pullulanase by the immobilized cells was investigated in a packed–bed reactor. Maximal reactor productivity (7.0 KU/h) with enzyme concentration of 16.8 U/ml and specific productivity of 131.64 U/g wet cells/h was attained at dilution rate of 0.42/h. The enzyme activity in the effluent started to decline gradually to the level of 8.7 U/ml after 25 days of the operation.     

Catalytic properties of the immobilized Aspergillus tamarii xylanase

Xylanase from Aspergillus tamarii was covalently immobilized on Duolite A147 pretreated with the bifunctional agent glutaraldehyde. The bound enzyme retained 54.2% of the original specific activity exhibited by the free enzyme (120 U/mg protein). Compared to the free enzyme, the immobilized enzyme exhibited lower optimum pH, higher optimum reaction temperature, lower energy of activation, higher K_m (Michaelis constant), lower V_max (maximal reaction rate). The half-life for the free enzyme was 186.0, 93.0, and 50.0 min for 40, 50, and 60°C, respectively, whereas the immobilized form at the same temperatures had half-life of 320, 136, and 65 min. The deactivation rate constant at 60°C for the immobilized enzyme is about 6.0 × 10⁻³, which is lower than that of the free enzyme (7.77 × 10⁻³ min). The energy of thermal deactivation was 15.22 and 20.72 kcal/mol, respectively for the free and immobilized enzyme, confirming stabilization by immobilization. An external mass transfer resistance was identified with the immobilization carrier (Duolite A147). The effect of some metal ions on the activity of the free and immobilized xylanase has been investigated. The immobilized enzyme retained about 73.0% of the initial catalytic activity even after being used 8 cycles.     

Regulation of radiation-induced liver damage by modulation of SIRT-1 activity: In vivo rat model

Silent information regulator 1 (SIRT-1), a nicotinamide adenine dinucleotide-dependent deacetylase, was found to regulate cell apoptosis, inflammation, and oxidative stress response in living organisms. Therefore, the role of SIRT-1 in regulating forkhead box O/poly ADP-ribose polymerase-1 (FOXO-1/PARP-1) signaling could provide the necessary validation for developing new pharmacological targets for the promotion or inhibition of SIRT-1 activity toward radiation sensitivity. In the present study, the SIRT-1 signaling pathway is being investigated to study the possible modulatory effect of resveratrol (RSV, SIRT-1 activator) versus nicotinamide (NAM, SIRT-1 inhibitor) in case of liver damage induced by whole-body gamma irradiation. Rats were exposed to 6 Gy gamma radiation after being pretreated with either RSV (10 mg/kg/day) or NAM (100 mg/kg/day) for 5 days, and subsequent examining hepatic morphological changes and apoptotic markers were assessed. The expression of SIRT-1, FOXO-1, and cleaved PARP-1 in the liver was analyzed. RSV improved radiation-induced apoptosis, mitochondrial dysfunction, and inflammation signified by low expression of caspase-3, lactate dehydrogenase, complex-I activity, myeloperoxidase, and total nitric oxide content. RSV increased the expression of SIRT-1, whereas cleaved PARP-1 and FOXO-1 were suppressed. These protective effects were suppressed by inhibition of SIRT-1 activity using NAM. These findings suggest that RSV can attenuate radiation-induced hepatic injury by reducing apoptosis and inflammation via SIRT-1 activity modulation.     

Immobilization of Aspergillus oryzae tannase and properties of the immobilized enzyme

Tannase enzyme from Aspergillus oryzae was immobilized on various carriers by different methods. The immobilized enzyme on chitosan with a bifunctional agent (glutaraldehyde) had the highest activity. The catalytic properties and stability of the immobilized tannase were compared with the corresponding free enzyme. The bound enzyme retained 20·3% of the original specific activity exhibited by the free enzyme. The optimum pH of the immobilized enzyme was shifted to a more acidic range compared with the free enzyme. The optimum temperature of the reaction was determined to be 40 °C for the free enzyme and 55 °C for the immobilized form. The stability at low pH, as well as thermal stability, were significantly improved by the immobilization process. The immobilized enzyme exhibited mass transfer limitation as reflected by a higher apparent K_m value and a lower energy of activation. The immobilized enzyme retained about 85% of the initial catalytic activity, even after being used 17 times.     

Stabilization of cellobiase by covalent coupling to soluble polysaccharide.

Cellobiase from Aspergillus niger was glycosylated by covalent coupling to cyanogen bromide activated dextran. The conjugated enzyme retained 62% of the original specific activity exhibited by the native cellobiase. The optimum pH as well as the pH stability of the conjugated form remain almost the same as for the native enzyme. Compared to the native enzyme, the conjugated form exhibited a higher optimal reaction temperature and energy of activation, a higher K(m) (Michaelis constant) and lower Vmax (maximal reaction rate), and improved thermal stability. The thermal deactivation of the native and conjugated cellobiase obeyed the first-order kinetics. The calculated half-life values of heat inactivation at 60, 70 and 80 degrees C was 10.7, 6.25, and 4.05 h, respectively, whereas at these temperatures the native enzyme was less stable (half-life of 3.5, 1.69, and 0.83 h, respectively). The deactivation rate constant at 80 degrees C for the conjugated cellobiase is about 7.9 x 10(-2) h-1, which is lower than that of the native enzyme (36.0 x 10(-2) h-1). The activation energy for denaturation of the native enzyme is about 10.58 kcal/mol, which is 7.25 kcal/mol lower than that of the conjugated enzyme. The effect of different surfactants and some metal ions on the activity of the conjugated cellobiase has been investigated.     

Catalytic properties of the immobilized Aspergillus tamarii xylanase

Xylanase from Aspergillus tamarii was covalently immobilized on Duolite A147 pretreated with the bifunctional agent glutaraldehyde. The bound enzyme retained 54.2% of the original specific activity exhibited by the free enzyme (120 U/mg protein). Compared to the free enzyme, the immobilized enzyme exhibited lower optimum pH, higher optimum reaction temperature, lower energy of activation, higher K_m (Michaelis constant), lower V_max (maximal reaction rate). The half-life for the free enzyme was 186.0, 93.0, and 50.0 min for 40, 50, and 60°C, respectively, whereas the immobilized form at the same temperatures had half-life of 320, 136, and 65 min. The deactivation rate constant at 60°C for the immobilized enzyme is about 6.0 × 10⁻³, which is lower than that of the free enzyme (7.77 × 10⁻³ min). The energy of thermal deactivation was 15.22 and 20.72 kcal/mol, respectively for the free and immobilized enzyme, confirming stabilization by immobilization. An external mass transfer resistance was identified with the immobilization carrier (Duolite A147). The effect of some metal ions on the activity of the free and immobilized xylanase has been investigated. The immobilized enzyme retained about 73.0% of the initial catalytic activity even after being used 8 cycles.     

Correction to: MicroRNA signature in hepatocellular carcinoma patients: identification of potential markers

Molecular Biology Reports - The correct spelling of the 7th authors' name is Mona Watany.     

Production and properties of fibrinolytic enzyme fromStreptomyces sp. NRC 411

Of 16Streptomyces spp. investigated for the production of extracellular fibrinolytic enzyme, one species was chosen as the most promising producer. Using shaken cultures grown for 7 days, optimal conditions for enzyme production were pH 6.0, 5% (w/v) starch as carbon source, (NH₄)₂SO₄ and soybean flour as nitrogen sources and KH₂PO₄ at 1.2 g/l. Maximal activity of the crude enzyme was at pH 6.0 and 45°C. Holding the enzyme at 37°C for 2 h decreased the activity by only 10%.     

Pretreatment and enzymic saccharification of water hyacinth cellulose

Water hyacinth was pretreated, under variable conditions, with NaOH, alkaline H₂O₂, peracetic acid and sodium chlorite. Combined pretreatments included sodium chlorite with each of NaOH, alkaline H₂O₂ and peracetic acid. Combined pretreatment with 0.1% NaClO₂ for 1 h at 100 °C and peracetic acid at 100 °C for 15 min afforded the most promising sample. The recovered lignin, cellulose and hemicellulose of this sample was 2.56%, 96.69%, and 81.38%, respectively. The same sample, by cellulase hydrolysis showed the highest cellulose conversion (80.8%) and 90% saccharification using 200 FPU/g substrate. Some ambient factors affecting saccharification of pretreated water hyacinth were investigated. Enzymic saccharification after 6 h was about 50% of that at 48 h, indicating a slow hydrolysis rate by time. Addition of 8% glucose at the beginning of the enzymic hydrolysis decreased the saccharification to about its half while addition of 8% ethanol brought about complete inhibition of the enzyme. Addition of cellobiase to the reaction mixture increased cellulose conversion and saccharification by 10%.