Acetic acid formation in Escherichia coli fermentation

Theoretical analysis of cellulase product inhibition (by cellobiose and glucose) has been performed in terms of the mathematical model for enzymatic cellulose hydrolysis. The analysis showed that even in those cases when consideration of multienzyme cellulase system as one enzyme (cellulase) or two enzymes (cellulase and beta-glucosidase) is valid, double-reciprocal plots, usually used in a product inhibition study, may be nonlinear, and different inhibition patterns (noncompetitive, competitive, or mixed type) may be observed. Inhibition pattern depends on the cellulase binding constant, enzyme concentration, maximum adsorption of the enzyme (cellulose surface area accessible to the enzyme), the range in which substrate concentration is varied, and beta-glucosidase activity. A limitation of cellulase adsorption by cellulose surface area that may occur at high enzyme/substrate ratio is the main reason for nonlinearity of double-reciprocal plots. Also, the results of calculations showed that material balance by substrate, which is usually neglected by researchers studying cellulase product inhibition, must be taken into account in kinetic analysis even in those cases when the enzyme concentration is rather low. (c) 1992 John Wiley & Sons, Inc.     

Yeast calmodulin localizes to sites of cell growth

Summary Intracellular localization of calmodulin was examined in the budding yeast,Saccharomyces cerevisiae. Distribution of calmodulin changes in a characteristic way during the cell cycle. Calmodulin localizes to a patch at the presumptive bud site of unbudded cells. It concentrates at the bud tip in small-budded cells, and later it diffuses throughout the entire bud. At cytokinesis, calmodulin is largely at the neck between the mother and daughter cells. Double staining experiments have shown that the location of some polarized actin dots is coincident with that of calmodulin dots. Polarized localization of actin dots is observed in cells depleted of calmodulin, suggesting that calmodulin is not required for localization of the actin dots. Thecdc24 mutant that has a defect in bud assembly at the restrictive temperature fails to exhibit polarized localization of calmodulin, indicating that theCDC24 gene product is responsible for controlling the polarity of calmodulin.     

Relationship of actin organization to growth in the two forms of the dimorphic yeastCandida tropicalis

Summary Candida tropicalis is a dimorphic yeast capable of growing both as a budding yeast and as filamentous hyphae depending upon the source of the carbon used in the culture medium. The organization of F-actin during growth of the yeast form (Y-form) and the hyphal form (H-form) was visualized by rhodamine-conjugated phalloidin by using a conventional fluorescence microscope as well as a laser scanning confocal fluorescence microscope. In single cells without a bud or non-growing hyphae, actin dots were evenly distributed throughout the cytoplasm. Before the growth of the bud or hypha, the actin dots were concentrated at one site. During bud growth, actin dots were located solely in the bud. They filled the small bud and then filled the apical two-thirds of the cytoplasm of the middlesized bud. During growth of the large bud, actin dots which had filled the apical half of the cytoplasm gradually moved to the tip of the bud. In the formation of the septum, actin dots were arranged in two lines at the conjunction of the bud and the mother cell. During hyphal growth, the majority of actin dots were concentrated at the hyphal apex. A line of clustered spots or a band of actin was observed only at the site where the formation of a new septum was imminent. This spatial and temporal organization of actin in both categories of cells was demonstrated to be closely related to the growth and local deposition of new cell wall material by monitoring the mode of growth with Calcofluor staining. Treatment of both forms of cells with cytochalasin A (CA) confirmed the close relationship between actin and new cell wall deposition. CA treatment revealed lightly stained unlocalized actin which was associated with abnormal cell wall deposition as well as changes in morphology. These results suggest that actin is required for proper growth and proper deposition of cell wall material and also for maintaining the morphology of both forms of cells.Abbrevations FM fluorescence microscopy - EM electron microscopy - rh rhodamine - CA cytochalasin A - CD cytochalasin D - PBS phosphate-buffered saline - DMSO dimethylsulfoxide - GA glutaraldehyde     

The xylanase introns from Cryptococcus albidus are accurately spliced in transgenic tobacco plants

The xylanase gene from Cryptococcus albidus contains seven introns. Genomic and cDNA clones under the control of the CaMV 35S promoter were transferred into tobacco plants using Agrobacterium-mediated cell transformation. The genes were transcribed and the mRNAs were amplified by the polymerase chain reaction using primers on each side of the intron region. About 90% of the amplification products from plants transformed with the genomic clone corresponded to the size of the pre-mRNA (1.2 kb) and 10% represented the spliced product (0.85 kb). The 0.85 kb fragment was cloned and sequenced and the result indicated that the introns from the xylanase gene were accurately spliced by the plant cells.     

Rapid determination of plasmid-carrying yeast cells by using an imaging sensor system

A novel imaging sensor system for the determination of plasmid carrying yeast cells was developed. The sensor system consisted of an Silicon Intensifier Target (SIT) video camera, a fluorescent microscope, and a personal computer system equipped with an image memory board. This system was based on the fact that the membrane integrity of only plasmid-carrying cells is lost following cell growth in 5-fluoro-orotic acid (5-FOA) containing medium, and consequently these target cell can be stained with fluorescent probes and detected. In this study, plasmid-carrying cells were detected and their fraction determined in a mixture of both plasmid-carring and plasmid-free cells. A good correlation was observed between the values determined by this sensor system and the conventional method in the 30%-80% range, and one assay was possible within 4 h. This sensor system could be used for the monitoring of plasmid-carrying fraction in recombinant yeast cells during cultivation.     

Optimal production of glutathione by controlling the specific growth rate of yeast in fed-batch culture

The optimal of the specific growth rate was obtained with simple mathematical model in a yeast fed-batch cultures. The model was based on the mass balance around the fed-batch system and the relationship between the specific growth rate, mu, and the specific production rate of glutathione, rho(G). The optimal profile of mu was calculated as a bang-bang type, That is mu, should start from the maximum value, mu(max) and should be kept at mu(max); then mu should be switched to mu(c), which gives a maximum value of rho(G). It was proven from the maximum principle that switching was needed only once, with the switching time from mu(max) to mu(c) depending on the final required glutathione content. Finally, this ideal profile of mu for the maximum production of glutathione was realized by manipulating the substrates feed rate in the fed-batch culture. Using the extended Kalman filter and a programmed-controller/feedback-compensator (PF) system, mu could be controlled at the optimal profile obtained. As a result, the maximum production of glutathione was accomplished fairly successfully. However, further improvement in the controller performance for mu is desired. The control strategy employed here can be applied to other batch reaction processes.     

Some factors influencing the proportion of periplasmic hepatitisB virus pre-S2 antigen in the recombinant yeastHansenula polymorpha

Summary A central composite design (CCD) was used to evaluate, for the purpose of future process optimization, the influence of pH, yeast extract and ammonium chloride concentrations on the proportion of periplasmic hepatitisB pre-S2 antigen in the recombinant yeastHansenula polymorpha. Each factor was tested at five levels, and a second order polynomial model for the proportion of periplasmic antigen was fitted to the treatment combinations. pH showed the greatest effect: the proportion of periplasmic antigen was greatly increased at the higher pH levels. At the higher pH levels used, the proportion of periplasmic antigen was enhanced by a high concentration of ammonium chloride. Additional experiments have confirmed both the validity of the selected model and the optimal conditions found. A significant correlation was found between the proportion of periplasmic antigen and the total yield of antigen. These results indicated that is should be possible to modulate the distribution of the pre-S2 antigen between the periplasm and the cytoplasm of the yeast.     

A Dictyostelium discoideum DNA fragment complements a Saccharomyces cerevisiae ura3 mutant

Dictyostelium discoideum DNA fragments have been inserted into the chimeric bacterium-yeast plasmid YEp13. Recombinant plasmids were used to transform yeast using a strain of Saccharomyces cerevisiae deficient in OMP decarboxylase activity. Several clones were selected for growth in uracil-free medium. One clone was further analysed and contains a plasmid with a segment of D. discoideum DNA which complements a yeast ura3 mutation.     

Molecular cloning of the gene for dihydrofolate reductase from Lactobacillus casei

The Lactobacillus casei gene for dihydrofolate reductase has been cloned in Escherichia coli using the multicopy vector pBR322. A restriction map of the cloned DNA has been prepared. The cloned DNA directs the synthesis of L. casei dihydrofolate reductase in E. coli and confers trimethoprim and methotrexate resistance.     

On the origin of mitochondria: a reexamination of the molecular structure and kinetic properties of pyruvate dehydrogenase complex from brewer''s yeast

45Ca2+ incorporated in response to glucose was selectively mobilized from the beta-cell-rich pancreatic islets of ob/ob-mice after raising the intracellular Na+ by removal of K+ or addition of ouabain or veratridine. Also studies of insulin release indicated opposite effects of glucose and Na+ on the intracellular sequestration of calcium. The fact that glucose inhibits insulin release induced by raised intracellular Na+ indicates that this sugar can lower the cytoplasmic [Ca2+]. The concept of a dual action of glucose on the cytoplasmic [Ca2+]. The concept of a dual action of glucose on the cytoplasmic [Ca2+] might well explain previous observations of an inhibitory component in the glucose action on the 45Ca2+ efflux.