Life cycle and matrix analyses for re-refined Oil in Japan

Unstable market systems and consumer preferences for virgin oil have inhibited the development of waste oil re-refining in Japan. In this papery comparative life cycle inventories were developed for re-refining waste oil and for the no-refining case in which the waste oil is incinerated and needs are supplied with virgin oil. Total energy, CO₂, NO_x, and SO₂ emissions were included during the re-refining and consumption (incineration) stages; all are lower in the case of re-refined fuel use. In addition, by using a streamlined LCA matrix, we demonstrate that re-refining waste oil can reduce environmental impacts compared with the case in which virgin oil is chosen.     

Volatile fatty acid production during anaerobic mesophilic digestion of tea and vegetable market wastes

Extraction of the organic content from vegetable market waste and tea waste was carried out in a packed digester for 24 and 300 h respectively. The sequence of appearance of volatile fatty acids during digestion of both the substrates was found to be different. The sequence was (Acetic, Propionic) > (Isobutyric, Butyric) > Valeric for digestion of vegetable market waste while it was Isovaleric > (Isobutyric, Acetic) > Propionic during digestion of tea waste. During the course of digestion, the early appearance of an acid did not relate to its high concentration. The rate of production of acetic acid and propionic acid was found to be higher than other volatile acids during digestion of both the substrates, although it was approximately ten times higher for vegetable market waste compared to tea waste. The acids can be arranged in four groups according to their rate of production as Acetic > Propionic > Butyric > (Valeric, Isobutyric) for vegetable market waste and Acetic > Isobutyric > Isovaleric > Propionic for tea waste.     

From Life Cycle Assessment to Life Cycle Management

Life cycle assessment (LCA) is a widely accepted methodology to support decision‐making processes in which one compares alternatives, and that helps prevent shifting of environmental burdens along the value chain or among impact categories. According to regulation in the European Union (EU), the movement of waste needs to be reduced and, if unavoidable, the environmental gain from a specific waste treatment option requiring transport must be larger than the losses arising from transport. The EU explicitly recommends the use of LCA or life cycle thinking for the formulation of new waste management plans. In the last two revisions of the Industrial Waste Management Programme of Catalonia (PROGRIC), the use of a life cycle thinking approach to waste policy was mandated. In this article we explain the process developed to arrive at practical life cycle management (LCM) from what started as an LCA project. LCM principles we have labeled the “3/3” principle or the “good enough is best” principle were found to be essential to obtain simplified models that are easy to understand for legislators and industries, useful in waste management regulation, and, ultimately, feasible. In this article, we present the four models of options for the management of waste solvent to be addressed under Catalan industrial waste management regulation. All involved actors concluded that the models are sufficiently robust, are easy to apply, and accomplish the aim of limiting the transport of waste outside Catalonia, according to the principles of proximity and sufficiency.     

Use of textile waste water along with liquid NPK fertilizer for production of wheat on saline sodic soils

A field experiment in collaboration with a private textile industry (Noor Fatima Fabrics Private (Ltd.), Faisalabad) was conducted to evaluate the effect of disposed water from bleaching unit, printing unit and end drain for improving growth and yield of wheat under saline sodic soil. Textile waste water along with canal water (control) was applied with and without liquid NPK fertilizer. The application of liquid NPK fertilizer with end drain waste water increased plant height, spike length, flag leaf length, root length, number of tillers (m^?2), number of fertile tillers (m^?2), 1000 grain weight, grain yield, straw yield and biological yield up to 21, 20, 20, 44, 17, 20, 14, 44, 40 and 41%, respectively compared to canal water (control). Similarly, the NPK uptake in grain was increased up to 15, 30 and 28%, respectively by liquid fertilizer treated end drain water as compare to canal water with liquid fertilizer. Moreover, concentration of different heavy metals particularly Cu, Cr, Pb and Cd was decreased in grains by application of waste water along with liquid NPK. The result may imply that waste water application along with liquid-NPK could be a novel approach for improving growth and yield of wheat in saline sodic soils.     

Biofilter performance and characterization of a biocatalyst degrading alkylbenzene gases

A biofilter treating alkylbenzene vapors was characterized for its optimal running conditions and kinetic parame-ters. Kinetics of the continuous biofilter were compared to batch kinetic data obtained with biofilm samples as well as with defined microbial consortia and with pure culture isolates from the biofilter. Both bacteria and fungi were present in the bioreactor. Five strains were isolated. Two bacteria, Bacillus and Pseudomonas, were shown to be dominant, as well as a Trichosporon strain which could, however, hardly grow on alkylbenzenes in pure culture. The remaining two strains were most often overgrown by the other three organisms in liquid phase batch cultures μ _max, K_S, K_I values and biodegradation rates were calculated and compared for the difterent mixed and pure cultures. Since filter bed acidification was observed during biofiltration studies reaching a pH of about 4, experiments were also undertaken to study the influence of pH on performance of the different cultures. Biodegradation and growth were possible in all cases, over the pH range 3.5–7.0 at appreciable rates, both with mixed cultures and with pure bacterial cultures. Under certain conditions, microbial activity was even observed in the presence of alkylbenzenes down to pH 2.5 with mixed cultures, which is quite unusual and explains the ability of the present biocatalyst to remove alkylbenzenes with high efficiency in biofilters under acidic conditions.     

Comparison of Different Standard Methods to Evaluate the Total Concentrations of Heavy Metals in Waste Rock

The mining industry is a very rapidly increasing production sector in Finland. Many new mines have been opened recently and others are in the planning phase. Mining legislation has been recently revised and compilation of an ID-directive (Industrial Emission Directive, 2010) required to implement environmental law revision is in progress. The aim of this study was to compare different digestion methods recommended by the Finnish Environmental Administration for threshold and guideline value determinations in the Finnish PIMA Decree (214/2007) and Government Decree (591/2006) concerning recovery of certain wastes in earth construction. Altogether six methods were tested, of which five were microwave-assisted acid digestion methods: ISO 11466, EPA Method 3051A (aqua region), EPA Method 3051A (HNO₃), EPA Method 3051A (HNO₃/HCl), and SFS-EN 13656, while one was a fusion method with lithium tetraborate (ASTM C 1391 - 95). The results showed that concentrations of heavy metals (As, Cd, Co, Cu, Ni, Pb, Sb, V, and Zn) can be determined reproducibly with standard methods, but the chemical method used can have a significant impact on the results. This conclusion is very important, because the measured heavy metal values can affect the classification and processing of waste materials, and thereby can significantly impact the cost of treatment.     

Extended Producer Responsibility in Thailand

Waste electrical and electronic equipment (WEEE) sheds light on the dimmer side of production and consumption patterns in modern societies. The rapid increase in its quantity and complexity contribute to the challenges it poses to solid waste management systems. Several members of the Organisation for Economic Co‐operation and Development (OECD) have relied on the principle of extended producer responsibility (EPR) to tackle the issue, with varying degrees of success. Several non‐OECD countries, including Thailand, are now developing WEEE programs and are looking for lessons from these first movers. This case study aims to provide an understanding both of this context and of the EPR program for WEEE proposed for Thailand. It finds that EPR mechanisms in general, and the proposed buy‐back system financed by product fees in Thailand in particular, have a strong potential to consolidate WEEE collection for the formal recycling sector by offering end users monetary incentives. On the negative side, this is an expensive combination of policy instruments, and the institutional design of the governmental fund is rigid. The policy proposal also contains no mechanism for product redesign—one of the objectives in the national WEEE strategy. This article suggests that the effectiveness of the policy might benefit from more flexibility at the compliance scheme level, in order to lessen the monopoly of the governmental fund, as well as the introduction of differentiated fees to promote environmentally friendly products.     

Use of Lethal Control to Reduce Habituation to Blank Rounds by Scavenging Birds

Abstract Scavenging bird deterrence frequently fails due to habituation. We demonstrated such habituation by gulls and corvids to blank rounds used in a dawn-to-dusk regime at a landfill site in southern England. We then combined blank rounds with live rounds and shot birds whenever they attempted to land. Gull numbers declined significantly despite only 1.9% of the population being shot. Corvid numbers returned to precontrol levels despite 52.7% of the population being shot. We suggest that shooting reduces gull habituation to blank rounds but is ineffective at reducing habituation by corvids.     

Plant bioregenerative life supports: The Italian CAB Project

Abstract

The Bioregenerative Life Support program CAB (Controllo Ambientale Biorigenerativo) is a key element of the Italian Space Agency (ASI) Medicine & Biotechnology scientific program, set forth in the ASI Activity Plan 2006–2008. The CAB program started in October 2006, under the prime partnership of Thales Alenia Space Italia, with a feasibility study of a controlled biological system, allowing the regeneration of resources and the production of food for life support in long duration missions. Main constituents of the CAB program are: (a) Higher plants as basic elements for food and oxygen production, CO₂ regeneration and water purification via the photosynthetic and leaf transpiration processes, and (b) biological & physico-chemical systems for environmental control, monitoring, power & data distribution, etc. The sectors of technological and scientific concern are practically all the ones typical for life support systems in the frame of long duration human missions; i.e., food production, in particular via the cultivation of higher plants, and food management; air regeneration (production of O₂, removal of CO₂, trace gas control); water regeneration (urine processing, gray water processing, potable water management); solid waste processing; resources allocation and storage; control of environmental conditions (Thermal-hygrometric, light, pressure, radiation, etc).     

Lead phytoextraction from printed circuit computer boards by Lolium perenne L. and Medicago sativa L.

This work assessed the ability of Lolium perenne and Medicago sativa for extracting lead (Pb) from particulate printed circuit computer boards (PCB) mixed in sand with the following concentrations: 0.5, 1.0 and 1.5 g of PCB, and including a control treatment without PCB. The PCB were obtained from computers, and grinded in two particle sizes: 0.0594 mm (PCB1) and 0.0706 mm (PCB2). The PCB particle sizes at their corresponding concentrations were applied to L. perenne and M. sativa by using three experimental assays. In assay II, PCB2 affected the biomass production for both plants. For assay III, the PCB1 increased the biomass of M. sativa (236.5%) and L. perenne (142.2%) when applying either 0.5 or 1.0 g, respectively. In regards to phytoextraction, assay I showed the highest Pb-extraction by roots of L. perenne (4.7%) when exposed to 1.5 g of PCB1. At assay I, L. perenne showed a Pb-bioconcentration factor higher than 1.0 when growing at 0.5 g of PCB1, and when HNO₃ was used as digestion solution; moreover, in assay III both plants showed a Pb-translocation factor higher than 1.0. Therefore, Lolium perenne and Medicago sativa are able to recover Pb from electronic wastes (PCB).