Two-stage anaerobic digestion of biodegradable municipal solid waste using a rotating drum mesh filter bioreactor and anaerobic filter

A rotating drum mesh filter bioreactor (RDMFBR) with a 100 μm mesh coupled to an anaerobic filter was used for the anaerobic digestion of biodegradable municipal solid waste (BMW). Duplicate systems were operated for 72 days at an organic loading rate (OLR) of 7.5 gVS l⁻¹ d⁻¹. Early in the experiment most of the methane was produced in the 2nd stage. This situation gradually reversed as methanogenesis became established in the 1st stage digester, which eventually produced 86–87% of the total system methane. The total methane production was 0.2 l g⁻¹ VS_added with 60–62% volatile solids destruction. No fouling was experienced during the experiment at a transmembrane flux rate of 3.5 l m⁻² h⁻¹. The system proved to be robust and stably adjusted to a shock loading increase to 15 gVS l⁻¹ d⁻¹, although this reduced the overall methane production to 0.15 l g⁻¹ VS_added.     

Rotary drum composting of vegetable waste and tree leaves

High rate composting studies on institutional waste, i.e. vegetable wastes, tree leaves, etc., were conducted on a demonstration-scale (3.5 m³) rotary drum composter by evaluating changes in some physico-chemical and biological parameters. During composting, higher temperature (60–70 °C) at inlet zone and (50–60 °C) at middle zone were achieved which resulted in high degradation in the drum. As a result, all parameters including TOC, C/N ratio, CO₂ evolution and coliforms were decreased significantly within few days of composting. Within a week period, quality compost with total nitrogen (2.6%) and final total phosphorus (6 g/kg) was achieved; but relatively higher final values of fecal coliforms and CO₂ evolution, suggested further maturation. Thus, two conventional composting methods namely windrow (M1) and vermicomposting (M2) tried for maturation of primary stabilized compost. By examining these methods, it was suggested that M2 was found suitable in delivering fine grained, better quality matured compost within 20 days of maturation period.     

Green City

This research analyzes the Green City project in the town of Três Coroas, Brazil. We describe its management system, evaluating the change process and the economic, social, and environmental benefits since the recycling center has been in service. We demonstrate a successful case of operational and cultural change in the disposal of industrial waste, describing the key points that helped the adoption of a new set of procedures, and illustrating the role of the champion in the implementation of a symbiotic cluster.     

Equilibrium and Kinetic Studies on the Removal of Basic Violet 10 from Aqueous Solutions Using Activated Carbons Prepared from Industrial Wastes

Low-cost adsorbents prepared from industrial wastes such as sugarcane bagasse (BC), rice husk (RC), and textile waste cloth (TC) are identified as suitable sorbents for removing basic violet 10 (BV). Fourier transform infrared (FTIR) and scanning electron microscopic (SEM) studies were carried out to characterize the prepared sorbents. The effects of dosage, time, and pH on dye removal were examined. It was observed that BV sorption takes place in acidic, neutral, and alkaline aqueous solutions. The work discussed the best-fit sorption isotherms among Freundlich and Langmuir, in addition to the reaction- and diffusion-based kinetic models. Based on the data obtained, it was found that the BV sorption took place in acidic, neutral, and alkaline aqueous solutions and sorption kinetics found to be controlled by pseudo-second-order and pore diffusion models. Also, thermodynamic parameters such as ΔG ^o, ΔH ^o, ΔS ^o, and E _a were calculated in order to understand the nature of the sorption process. The maximum dye removal capacity (DRC) was found to be 5608, 1244, and 27,495 mg/kg for BC, RC, and TC, respectively. Collectively, it can be concluded that the activated carbon sorbents, prepared from the named wastes, can used to adequately remove the basic violet dye from its aqueous waste solution.     

Methane emission potential and increased efficiency of a phytoremediation system bioaugmented with Bacillus firmus XJSL 1-10

Horizontal subsurface flow constructed wetland mesocosms (HSSCW) designed to treat municipal waste water were bioaugmented with Bacillus firmus XJSL 1-10. The efficiencies of the three HSSCW mesocosms (non-vegetated HSSCW, Schoenoplectus validus HSSCW and Bambusa vulgaris HSSCW) were assessed. Bioaugmentation not only enhanced the efficiency of the phytoremediation system but also reduced methane emission from an average of 51.3 mg/m2/d to 21.6 mg/m2/d in Schoenoplectus validus HSSCW and from an average of 1708 mg/m2/d to 1473 mg/m2/d in Bambusa vulgaris HSSCW. Each of the three types of bioaugmented HSSCWs showed higher purification efficiency with respect to the removal of BOD and NH4-N than the non-bioaugmented HSSCWs. The performance enhancement was most significant in bioaugmented Schoenoplectus validus HSSCW mesocosm with 48.8 and 44.8% lower BOD, and NH4-N, respectively than the non-bioaugmented HSSCW.     

Synthesis and characterization of a novel cellulose-g-poly(acrylic acid-co-acrylamide) superabsorbent composite based on flax yarn waste

A new, low-cost, and eco-friendly cellulose-based superabsorbent was successfully prepared from flax yarn waste. The method used was a free-radical graft copolymerization of AA and AM onto a cellulose backbone in a homogeneous aqueous solution. APS was used as the initiator in the presence of a crosslinker, MBA. The effects of various factors on water absorbency were discussed. The factors included reaction temperature, initiator amount, monomer amount, salt solution type, and solution pH. Under the optimized conditions, the water absorbencies of the obtained superabsorbent composite were 875 g/g distilled water, 490 g/g natural rainwater, and 90 g/g 0.9 wt% aqueous NaCl solution. The product also had excellent water retention and salt resistance properties. Fourier-transform infrared spectroscopy and scanning electron microscopy were employed to examine the structure of the prepared superabsorbent.     

Sustainable sanitation technology options for urban slums

Poor sanitation in urban slums results in increased prevalence of diseases and pollution of the environment. Excreta, grey water and solid wastes are the major contributors to the pollution load into the slum environment and pose a risk to public health. The high rates of urbanization and population growth, poor accessibility and lack of legal status in urban slums make it difficult to improve their level of sanitation. New approaches may help to achieve the sanitation target of the Millennium Development Goal (MDG) 7; ensuring environmental sustainability. This paper reviews the characteristics of waste streams and the potential treatment processes and technologies that can be adopted and applied in urban slums in a sustainable way. Resource recovery oriented technologies minimise health risks and negative environmental impacts. In particular, there has been increasing recognition of the potential of anaerobic co-digestion for treatment of excreta and organic solid waste for energy recovery as an alternative to composting. Soil and sand filters have also been found suitable for removal of organic matter, pathogens, nutrients and micro-pollutants from grey water.     

Harnessing the power of enzymes for environmental stewardship

Enzymes are versatile catalysts with a growing number of applications in biotechnology. Their properties render them also attractive for waste/pollutant treatment processes and their use might be advantageous over conventional treatments. This review highlights enzymes that are suitable for waste treatment, with a focus on cell-free applications or processes with extracellular and immobilized enzymes. Biological wastes are treated with hydrolases, primarily to degrade biological polymers in a pre-treatment step. Oxidoreductases and lyases are used to biotransform specific pollutants of various nature. Examples from pulp and paper, textile, food and beverage as well as water and chemical industries illustrate the state of the art of enzymatic pollution treatment. Research directions in enzyme technology and their importance for future development in environmental biotechnology are elaborated. Beside biological and biochemical approaches, i.e. enzyme prospection and the design of enzymes, the review also covers efforts in adjacent research fields such as insolubilization of enzymes, reactor design and the use of additives. The effectiveness of enzymatic processes, especially when combined with established technologies, is evident. However, only a limited number of enzymatic field applications exist. Factors like cost and stability of biocatalysts need to be addressed and the collaboration and exchange between academia and industry should be further strengthened to achieve the goal of sustainability.     

脱硫废弃物对碱胁迫下水稻叶片钙分布、Ca2+-ATPase活性及抗氧化特征的影响

为了探讨脱硫废弃物提高水稻抗盐碱的作用机制,采用盆栽法,研究脱硫废弃物对碱胁迫下水稻幼苗叶片总钙含量、Ca2+分布、细胞膜Ca2+-ATPase活性及活性氧含量等的变化.结果表明： 对照处理的细胞中钙颗粒零星分布于细胞壁和叶绿体中,添加脱硫废弃物和CaSO4处理的细胞质膜、细胞间隙、细胞壁和液泡中有大量的钙颗粒分布;随着脱硫废弃物和CaSO4添加量的增加,叶片总钙含量增加,质膜和液泡膜Ca2+-ATPase活性呈上升趋势,质膜透性、MDA含量和活性氧O2〖SX(B-*3〗-〖〗·〖SX)〗产生速率呈下降趋势,SOD、POD等保护酶活性升高.添加脱硫废弃物在一定程度上能够减缓碱胁迫对水稻造成的细胞伤害,起主要作用的物质可能是其主要成分CaSO4.     

A survey of keratinophilic fungi as a tool for hen feather utilization

One hundred keratinophilic fungi belonging toAcremonium, Aphanoascus, Amauroascus, Botryotrichum, Chrysosporium, Ctenomyces, Gymnoascus, Malbranchea, Microsporum, Narashimella andVerticillium were tested for their potential to utilize hen feathers as keratinous waste.Acremonium sp. 2 andChrysosporium europae released 494.33 and 457.33 μg/ml protein from feathers respectively.Microsporum gypseum released 698.66 μg/ml protein from feathers. Some of these keratinophilic strains other thanMicrosporum may prove beneficial as tools for rapid utilization of not only feathers but other hard keratinous substrates and their end product may be of industrial importance.