废电池浸出液对蚕豆种子萌发和根尖细胞有丝分裂的影响

以蚕豆种子为材料,采用水培方法研究废电池浸出液对蚕豆种子萌发及根尖细胞有丝分裂的影响。结果表明,不同浓度废电池浸出液对蚕豆根、芽的萌发及根尖细胞有丝分裂都产生一定程度的抑制作用,并随着浓度的增加,抑制作用逐渐增大,同时微核率也快速上升。本试验表明,较高浓度的废电池浸出液是毒性很强的溶液,属重度污染液。     

Characterization of composted olive mill wastes to predict potential plant disease suppressiveness

Despite its proven agronomic value, the plant disease suppressive effect of composts from olive waste has not been adequately investigated. In the present study, the disease suppressive potential of two olive waste (OW) composts against soil-borne plant pathogens was investigated. Both OW composts showed sizeable, active microbial populations, which were able to grow actively on chitin and cellulose. In plate inhibition trials, OW compost water extracts (CWEs) exerted a significant inhibitory effect on the growth of the pathogens Fusarium oxysporum f.sp. lycopersici (Fol), Pythium ultimum, Phytophtora infestans, Sclerotina sclerotiorum and Verticillium dahliae; and in pot experiments, the OW composts significantly reduced P. ultimum damping-off and Fol wilt diseases on tomato seedlings. The disease suppressive effect of OW composts seems to be due to the combined effects of suppression phenomena caused by the presence of microorganisms competing for both nutrients and space as well as by the activity of specific antagonistic microorganisms.     

Effects of sodium bisulfate on the bacterial population structure of dairy cow waste

Aims: To determine the effects of sodium bisulfate (SBS) on the bacterial populations in cattle waste. Methods and Results: We applied SBS at 0, 60, 70 or 100 kg week^?1 to cattle waste as it accumulated on the floors of four cattle pens, housing eight cattle each. We observed significant pH decreases in all of the treated wastes on day one; however, the 60 kg week^?1 treatment returned to control levels by day four, while the others remained significantly lower. Heterotrophic plate counts of the waste revealed that all treatments reduced the bacterial populations in the wastes on day one; however, all returned to control levels by day four. The 16S rRNA gene libraries derived from the wastes revealed significant reductions in sequences associated with the phyla Bacteroidetes and Firmicutes and increases in the Proteobacteria, Actinobacteria and Spirochaetes on day one, but resembled the control by day seven. Sequences associated with Escherichia coli increased significantly after SBS application, but became undetectable by day seven. Conclusions: SBS application significantly alters the bacterial population structure of waste during the first few days of application, but the populations return to almost normal after 7 days. Significance and Impact of the Study: Application of SBS to animal waste can reduce emissions; however, biosecurity precautions must be rigorously maintained during the initial application to ensure that pathogenic E. coli is not released into the environment.     

Mechanistically distinct roles for Sgs1p in checkpoint activation and replication fork maintenance

The RecQ helicase Sgs1p forms a complex with the type 1 DNA topoisomerase Top3p that resolves double Holliday junctions resulting from Rad51-mediated exchange. We find, however, that Sgs1p functions independently of both Top3p and Rad51p to stimulate the checkpoint kinase Rad53p when replication forks stall due to dNTP depletion on hydroxyurea. Checkpoint activation does not require Sgs1p function as a helicase, and correlates with its ability to bind the Rad53p kinase FHA1 motif directly. On the other hand, Sgs1p's helicase activity is required together with Top3p and the strand-exchange factor Rad51p, to help stabilise DNA polymerase epsilon at stalled replication forks. In this function, the Sgs1p/Top3p complex acts in parallel to the Claspin-related adaptor, Mrc1p, although the sgs1 and mrc1 mutations are epistatic for Rad53p activation. We thus identify two distinct pathways through which Sgs1p contributes to genomic integrity: checkpoint kinase activation requires Sgs1p as a noncatalytic Rad53p-binding site, while the combined Top3p/Sgs1p resolvase activity contributes to replisome stability and recovery from arrested replication forks.     

Density and intercohort priority effects on larval <Emphasis Type="Italic">Salamandra salamandra</Emphasis> in temporary pools

Priority effects, i.e., effects of an early cohort on the performance of a later cohort, are generally studied between, and not within, species. The paucity of intraspecific assessments does not reflect a lack of ecological importance, but the technical problem associated with differentiating between conspecific cohorts. Here, we examine priority and density-dependent effects on larval Salamandra salamandra infraimmaculata. Larvae deposited by their mother early in the season have increased risk of desiccation, as rains at the beginning of the season are less frequent and unpredictable. However, breeding later may incur a high cost through conspecific priority effects, including cannibalism and competition. In an outdoor artificial pool experiment, we established densities of 0, 1, 2, 4 or 6 newly born larvae per pool (∼30 l), and 40 days later, added a second cohort of three newly born larvae to each pool. We differentiated between cohorts using natural individual-specific markings. For the early cohort, increasing density decreased survival and size at metamorphosis, and increased time to metamorphosis. For the late cohort, survival was 100% in pools without early-cohort larvae, but ranged between 13 and 33% in the presence of early-cohort larvae. Time to metamorphosis was significantly longer in the presence of low vs high densities of early-cohort larvae. Results suggest that early-cohort larvae are mainly subjected to exploitative competition and cannibalism mediated by food limitation, and that late-cohort larvae are subjected to cannibalism and interference due to size asymmetry between cohorts. The strong priority effects suggest that Salamandra females could increase their fitness by adjusting the number of larvae they deposit in specific pools to avoid cannibalism and intraspecific competition.     

Declines of zoonotic agents in liquid livestock wastes stored in batches on-farm

AIM: To measure the decline rates of zoonotic agents introduced into liquid livestock wastes in on-farm storage tanks. METHODS AND RESULTS: Salmonella spp., Escherichia coli O157, Campylobacter jejuni, Listeria monocytogenes and Cryptosporidium parvum, propagated in laboratory-controlled conditions, were inoculated into 35,000-l volumes of fresh livestock wastes (pig slurries, cattle slurries and dirty waters). D-values for bacteria were six to 44 days, and for C. parvum were 133 to 345 days. Campylobacter jejuni declined significantly more rapidly than the other bacterial pathogens, while E. coli O157 declined significantly more slowly. On average, bacterial declines were not affected by the season of waste deposition and storage or by the dry matter content of the wastes, but were more rapid in dirty waters than in pig slurries. The physiciochemical composition of wastes in each category varied significantly. CONCLUSIONS: Zoonotic agents can survive for several months during storage of liquid livestock wastes. Livestock wastes should be batch-stored and not subjected to continuous additions. SIGNIFICANCE AND IMPACT OF THE STUDY: This study indicates that batches of liquid livestock waste, if contaminated with bacterial pathogens, should be stored for 6 months to reduce contamination levels. Alternative strategies for reducing C. parvum levels in liquid livestock wastes should be explored.     

Cultivation of oyster mushrooms (<Emphasis Type="Italic">Pleurotus</Emphasis> spp.) on various lignocellulosic wastes

Cultivation of speciality mushrooms on lignocellulosic wastes represents one of the most economically and cost-effective organic recycling processes. Three species of Pleurotus, namely P. columbinus, P. sajor-caju and P. ostreatus were experimentally evaluated on untreated organic wastes including chopped office papers, cardboard, sawdust and plant fibres. Production studies were carried out in polyethylene bags of about 1 kg wet weight with 5% spawning rates of substrate fresh weight in a custom-made growth room especially designed for spawn run and cropping. The conversion percentage from dry substrate weight to fresh mushroom weight (biological efficiency) was determined. The highest biological efficiency was noted with P. columbinuson cardboard (134.5%) and paper (100.8%), whereas P. ostreatus produced maximum yield on cardboard (117.5%) followed by paper (112.4%). The overall yield of P. sajor-cajuwas comparatively low (range 47–78.4%). The average number of sporophore flushings ranged between 5 and 6 times. The findings that P. columbinus and P. ostreatus are superior to P. sajor-caju are consistent with previous reports elsewhere. Further evaluation of P. columbinus alone on different bagging systems containing partially pasteurized office papers as a growing substrate revealed that polyethylene bags resulted in 109.4% biological efficiency in contrast to pottery (86%), plastic trays (72%) or polyester net (56%). The above findings reveal an opportunity for commercial implication of oyster mushroom especially P. columbinus for utilization of different feasible and cheap recyclable residues.     

Waste Treatment and Assessment of Long-Term Emissions (8pp)

Goal, Scope and Background The disposal phase of a product’s life cycle in LCA is often neglected or based on coarse indicators like ‘kilogram waste’. The goal of report No. 13 of the ecoinvent project (Doka 2003) is to create detailed Life Cycle Inventories of waste disposal processes. The purpose of this paper is to give an overview of the models behind the waste disposal inventories in ecoinvent, to present exemplary results and to discuss the assessment of long-term emissions. This paper does not present a particular LCA study. Inventories are compiled for many different materials and various disposal technologies. Considered disposal technologies are municipal incineration and different landfill types, including sanitary landfills, hazardous waste incineration, waste deposits in deep salt mines, surface spreading of sludges, municipal wastewater treatment, and building dismantling. The inventoried technologies are largely based on Swiss plants. Inventories can be used for assessment of the disposal of common, generic waste materials like paper, plastics, packaging etc. Inventories are also used within the ecoinvent database itself to inventory the disposal of specific wastes generated during the production phase. Inventories relate as far as possible to the specific chemical composition of the waste material (waste-specific burdens). Certain expenditures are not related to the waste composition and are inventoried with average values (process-specific burdens). Methods The disposal models are based on previous work, partly used in earlier versions of ecoinvent/ETH LCI data. Important improvements were the extension of the number of considered chemical elements to 41 throughout all disposal models and new landfill models based on field data. New inventories are compiled for waste deposits in deep salt mines and building material disposal. Along with the ecoinvent data and the reports, also Excel-based software tools were created, which allow ecoinvent members to calculate waste disposal inventories from arbitrary waste compositions. The modelling of long-term emissions from landfills is a crucial part in any waste disposal process. In ecoinvent long-term emissions are defined as emissions occurring 100 years after present. They are reported in separate emission categories. The landfill inventories include long-term emissions with a time horizon of 60’000 years after present. Results and Discussion As in earlier studies, the landfills prove to be generally relevant disposal processes, as also incineration and wastewater treatment processes produce landfilled wastes. Heavy metals tend to concentrate in landfills and are washed out to a varying degree over time. Long-term emissions usually represent an important burden from landfills. Comparisons between burdens from production of materials and the burdens from their disposal show that disposal has a certain relevance. Conclusion The disposal phase should by default be included in LCA studies. The use of a material not only necessitates its production, but also requires its disposal. The created inventories and user tools facilitate heeding the disposal phase with a similar level of detail as production processes. The risk of LCA-based decisions shifting burdens from the production or use phase to the disposal phase because of data gaps can therefore be diminished. Recommendation and Perspective Future improvements should include the modelling of metal ore refining waste (tailings) which is currently neglected in ecoinvent, but is likely to be relevant for metals production. The disposal technologies considered here are those of developed Western countries. Disposal in other parts of the World can differ distinctly, for logistic, climatic and economic reasons. The cross-examination of landfill models to LCIA soil fate models could be advantageous. Currently only chemical elements, like copper, zinc, nitrogen etc. are heeded by the disposal models. A possible extension could be the modelling of the behaviour of chemical compounds, like dioxins or other hydrocarbons.     

Sorption of chromium(VI) from aqueous solution by cassava (Manihot sculenta Cranz.) waste biomass

The sorption of highly toxic Cr(VI) ions by cassava waste biomass was quantitatively investigated. The sorption was found to be influenced by several physico-chemical factors such as agitation speed, temperature, contact time, pH, and sorbent/sorbate ratio. The adsorption data at equilibrium were fitted to Freundlich and Langmuir isotherms. The monolayer sorption capacity was found to be 61.79 mg of Cr(VI) per gram of biomass. The kinetics of Cr(VI) adsorption to pure cassava-tuber-bark wastes were determined based on a pseudo-second-order-rate model using the batch-sorption technique at a temperature of 30 degrees. The kinetics data suggest that the adsorption process is exothermic, and that the rate-limiting step is physisorption. Negative DeltaG(ads) values indicate that the adsorption is spontaneous and exothermic in nature. Also, under optimal conditions (in agitated 1M H(2)SO(4) at 30 degrees), the cassava waste biomass appears to be recyclable.