Kinetics and hydrodynamics of Agapanthus umbellatus pollen-tube growth: A structural and stereological study

Summary In vitro pollen germination of Agapanthus umbellatus follows a logistic-type curve. It has a lag phase, which corresponds to pollen grain (PG) hydration, followed by an exponential phase — initial pollentube (PT) growth. The lag phase is characterized by an increase of about 40% in the volume of the PG as a result of the hydration process. During the exponential phase the PT emerges, and 40 min later it possesses an ultrastructural organization with a typical two-layer wall and four well-defined zones: the apical, sub-apical, nuclear and vacuolar zones. In this period the material transported by the Golgi vesicles seems to be mostly incorporated into the pollen-tube wall (PTW). Stereological analysis showed that the increase in tube volume is correlated with the increase in the vacuolar compartment at the PG level. The decrease in the relative volume occupied by the mitochondria, generative cell and vegetative nucleus in the PG suggests that these organelles move to the PT. A correlation between the disappearance of lipid droplets in the lag phase and the metabolic reactions that take place during hydration is suggested.Abbreviations PT Pollen tube - Pg pollen grain - PTW pollen-tube wall     

Ultrastructural localization of acid phosphatase in the pollen tube of Prunus avium L. (sweet cherry)

The pollen tube of Prunus avium (cherry) consists of a growth zone of vesicles at the tip and an assemblage of organelles typical of an actively metabolizing cell. Electron opaque globules are closely associated with the plasma membrane and fibrillar cell wall layer at the tip. Acid phosphatase (EC 3.1.3.2) activity is localized in the membranes of 120 nm vesicles and ER system, the lumen of 50 nm vesicles, the plasma membrane and the tube nucleus.     

Netrin‐1 is required for efficient neural tube closure

During neural tube formation, neural plate cells migrate from the lateral aspects of the dorsal surface towards the midline. Elevation of the lateral regions of the neural plate produces the neural folds which then migrate to the midline where they fuse at their dorsal tips, generating a closed neural tube comprising an apicobasally polarized neuroepithelium. Our previous study identified a novel role for the axon guidance receptor neogenin in Xenopus neural tube formation. We demonstrated that loss of neogenin impeded neural fold apposition and neural tube closure. This study also revealed that neogenin, via its interaction with its ligand, RGMa, promoted cell–cell adhesion between neural plate cells as the neural folds elevated and between neuroepithelial cells within the neural tube. The second neogenin ligand, netrin‐1, has been implicated in cell migration and epithelial morphogenesis. Therefore, we hypothesized that netrin‐1 may also act as a ligand for neogenin during neurulation. Here we demonstrate that morpholino knockdown of Xenopus netrin‐1 results in delayed neural fold apposition and neural tube closure. We further show that netrin‐1 functions in the same pathway as neogenin and RGMa during neurulation. However, contrary to the role of neogenin‐RGMa interactions, neogenin‐netrin‐1 interactions are not required for neural fold elevation or adhesion between neuroepithelial cells. Instead, our data suggest that netrin‐1 contributes to the migration of the neural folds towards the midline. We conclude that both neogenin ligands work synergistically to ensure neural tube closure. © 2012 Wiley Periodicals, Inc., 2013     

The pollen tube: a soft shell with a hard core

Plant cell expansion is controlled by a fine‐tuned balance between intracellular turgor pressure, cell wall loosening and cell wall biosynthesis. To understand these processes, it is important to gain in‐depth knowledge of cell wall mechanics. Pollen tubes are tip‐growing cells that provide an ideal system to study mechanical properties at the single cell level. With the available approaches it was not easy to measure important mechanical parameters of pollen tubes, such as the elasticity of the cell wall. We used a cellular force microscope (CFM) to measure the apparent stiffness of lily pollen tubes. In combination with a mechanical model based on the finite element method (FEM), this allowed us to calculate turgor pressure and cell wall elasticity, which we found to be around 0.3 MPa and 20–90 MPa, respectively. Furthermore, and in contrast to previous reports, we showed that the difference in stiffness between the pollen tube tip and the shank can be explained solely by the geometry of the pollen tube. CFM, in combination with an FEM‐based model, provides a powerful method to evaluate important mechanical parameters of single, growing cells. Our findings indicate that the cell wall of growing pollen tubes has mechanical properties similar to rubber. This suggests that a fully turgid pollen tube is a relatively stiff, yet flexible cell that can react very quickly to obstacles or attractants by adjusting the direction of growth on its way through the female transmitting tissue.     

Mesh considerations for finite element blast modelling in biomechanics

Finite element (FE) modelling is a popular tool for studying human body response to blast exposure. However, blast modelling is a complex problem owing to more numerous fluid–structure interactions (FSIs) and the high–frequency loading that accompanies blast exposures. This study investigates FE mesh design for blast modelling using a sphere in a closed-ended shock tube meshed with varying element sizes using both tetrahedral and hexahedral elements. FSI was consistent for sphere-to-fluid element ratios between 0.25 and 4, and acceleration response was similar for both element types (R² = 0.997). Tetrahedral elements were found to become increasingly volatile following shock loading, causing higher pressures and stresses than predicted with the hexahedral elements. Deviatoric stress response was dependent on the sphere mesh size (p < 0.001), while the pressure response was dependent on the shock tube mesh size (p < 0.001). The results of this study highlight the necessity for mesh sensitivity analysis in blast models.     

Periconceptional maternal alcohol consumption and neural tube defects

BACKGROUND: Neural tube defects (NTD)s, which occur when the neural tube fails to close during early gestation, are some of the most common birth defects worldwide. Alcohol is a known teratogen and has been shown to induce NTDs in animal studies, although most human studies have failed to corroborate these results. Using data from the National Birth Defects Prevention Study, associations between maternal reports of periconceptional (1 month prior through 2 months postconception) alcohol consumption and NTDs were examined. METHODS: NTD cases and unaffected live born control infants, delivered from 1997 through 2005, were included. Interview reports of alcohol consumption (quantity, frequency, variability, and type) were obtained from 1223 case mothers and 6807 control mothers. Adjusted odds ratios (aOR)s and 95% confidence intervals were estimated using multivariable logistic regression analysis. RESULTS: For all NTDs combined, most aORs for any alcohol consumption, one or more binge episodes, and different type(s) of alcohol consumed were near unity or modestly reduced (≥0.7<aOR≤1.1) and were not statistically significant. Findings were similar for individual NTD subtypes. CONCLUSIONS: These findings suggest no elevated association between maternal periconceptional alcohol consumption and NTDs. Underreporting of alcohol consumption, due to negative social stigma associated with alcohol consumption during pregnancy, and limited reports for mothers with early pregnancy loss of a fetus with an NTD may have affected the estimated odds ratios. Future studies should aim to increase sample sizes for less prevalent subtypes, reduce exposure misclassification, and improve ascertainment offetal deaths and elective terminations. Birth Defects Research (Part A), 2013. © 2013 Wiley Periodicals, Inc.     

Proportion of neural tube defects attributable to known risk factors

BACKGROUND

Recognized risk factors for neural tube defects (NTDs) poorly predict population‐level NTD risk. However, the proportion of NTDs that can be attributed to these risk factors is uncertain.

METHODS

To determine the proportion of NTD cases that is attributable to known or suspected risk factors (i.e., female infant sex, family history of NTDs, and maternal Hispanic ethnicity, obesity, pregestational diabetes, gestational diabetes, low dietary folate intake, lack of folic acid supplementation, anticonvulsant use, and hot tub or sauna use), we estimated the adjusted population attributable fraction (aAF) for each factor, using the method of Eide and Geffler and data from the National Birth Defects Prevention Study.

RESULTS

Our analyses of these data indicate that the proportion of cases of spina bifida and anencephaly that can be attributed to known risk factors is 28% and 44%, respectively. For spina bifida, the factor with the greatest attributable fraction was maternal obesity (aAF, 10%), whereas for anencephaly it was Hispanic ethnicity (aAF, 15%).

CONCLUSION

Our analyses indicate that known risk factors account for <50% of NTD cases. Hence, the majority of NTD cases are attributable to, as yet, unidentified factors. These findings highlight the need for continued research to identify genetic and additional nongenetic risk factors for NTDs. Further, these findings suggest that strategies that aim to reduce the risk of NTDs associated with maternal Hispanic ethnicity and obesity may have the greatest impact on the population prevalence of these conditions. Birth Defects Research (Part A), 2013. © 2012 Wiley Periodicals, Inc.     

The maternal folate hydrolase gene polymorphism is associated with neural tube defects in a high-risk Chinese population

Folate hydrolase 1 (FOLH1) gene encodes intestinal folate hydrolase, which regulates intestinal absorption of dietary folate. Previous studies on the association between polymorphisms rs202676 and rs61886492 and the risk of neural tube defects (NTDs) were inconclusive. A case–control study of women with NTD-affected pregnancies (n = 160) and controls (n = 320) was conducted in the Chinese population of Lvliang, a high-risk area for NTDs. We genotyped the polymorphic sites rs202676 and rs61886492 and assessed maternal plasma folate and total homocysteine (tHcy). Our results showed that in case group, plasma folate concentrations were 18 % lower compared with those of control group (8.32 vs. 6.79 nmol/L, p = 0.033) and tHcy concentrations were 17 % higher (10.47 vs. 12.65 μmol/L, p = 0.047). Almost all samples had the rs61886492 GG genotype (99.78 %). The result showed that the frequency of GG genotype in rs202676 was significantly higher in group with multiple NTDs than in controls (p = 0.030, OR = 2.157, 95 % CI, 1.06–4.38). The multiple-NTD group showed higher maternal plasma concentrations of tHcy (10.47 vs. 13.96 μmol/L, p = 0.024). The GG genotype of rs202676 had a lower maternal folate and higher tHcy concentrations than other genotypes with no significant differences. The result of structural prediction indicated that this variation might change the spatial structure of the protein. These results suggested that the maternal polymorphism rs202676 was a potential risk factor for multiple NTDs in this Chinese population. The allele G might affect maternal plasma folate and tHcy concentration.