城市空气污染对周边区域空气质量的影响

京津冀地区是全球以PM_(2.5)为首要污染物的空气污染最严重的区域之一,并已严重制约区域发展。大区域尺度上(例全国尺度)开展城市与其周边区域的PM_(2.5)的研究通常直接比较二者的浓度差异,以定量地评估城市PM_(2.5)污染对周边区域的影响,但这种方法在小区域较难精细地刻画城市对周边区域的影响的方向性和距离性差异。利用京津冀地区13个城市2000年,2005年,2010年,2015年PM_(2.5)浓度和土地覆盖类型数据,以城市重心到城市边界的平均距离为基本距离,建立每个城市的一级(一倍基本距离)和二级(二倍基本距离)缓冲区,然后将缓冲区分成8个象限,以定量分析城市PM_(2.5)污染对周边区域影响的方向性和距离差异。结果发现:(1)2000—2015年,京津冀城市群各地级市与周边区域空气质量时空分布分为以下两种模式:第一种模式是城区浓度高,周边区域低;第二种模式是城区浓度低,周边区域高且浓度差异很小。(2)各地级市对周边区域影响程度和范围呈上升趋势,并且这种影响具体表现在距离性和方向性两方面:(1)大部分城市距离城区越远,受城市PM_(2.5)污染的潜在影响越大。(2)2000—2015年,除天津、廊坊、衡水和沧州,其余城市空气污染对周边影响的方向性特征差异显著。通过建立城市空气污染对周边区域定量化方法并在京津冀开展实证研究,拓展了城市空气污染对周边区域空气质量影响研究的方法体系,为定量地开展城市化的生态环境效应研究提供了方法和实证拓展。     

Analysis of the effects of firing rate and synchronization on spike-triggered averaging of multidirectional motor unit torque

Spike-triggered averaging (STA) of muscle force transients has often been used to estimate motor unit contractile properties, using the discharge of a motor unit within the muscle as the triggering events. For motor units that exert torque about multiple degrees-of-freedom, STA has also been used to estimate motor unit pulling direction. It is well known that motor unit firing rate and weak synchronization of motor unit discharges with other motor units in the muscle can distort STA estimates of contractile properties, but the distortion of STA estimates of motor unit pulling direction has not been thoroughly evaluated. Here, we derive exact equations that predict that STA decouples firing rate and synchronization distortion when used to estimate motor unit pulling direction. We derive a framework for analyzing synchronization, consider whether the distortion due to synchronization can be removed from STA estimates of pulling direction, and show that there are distributions of motor unit pulling directions for which STA is insensitive to synchronization. We conclude that STA may give insight into how motoneuronal synchronization is organized with respect to motor unit pulling direction. Action Editor: David Terman     

Climatic similarity and biological exchange in the worldwide airline transportation network

Recent increases in the rates of biological invasion and spread of infectious diseases have been linked to the continued expansion of the worldwide airline transportation network (WAN). Here, the global structure of the WAN is analysed in terms of climatic similarity to illuminate the risk of deliberate or accidental movements of climatically sensitive organisms around the world. From over 44,000 flight routes, we show, for each month of an average year, (i) those scheduled routes that link the most spatially distant but climatically similar airports, (ii) the climatically best-connected airports, and (iii) clusters of airports with similar climatic features. The way in which traffic volumes alter these findings is also examined. Climatic similarity across the WAN is skewed (most geographically close airports are climatically similar) but heavy-tailed (there are considerable numbers of geographically distant but climatically similar airports), with climate similarity highest in the June-August period, matching the annual peak in air traffic. Climatically matched, geographically distant airports form subnetworks within the WAN that change throughout the year. Further, the incorporation of passenger and freight traffic data highlight at greater risk of invasion those airports that are climatically well connected by numerous high capacity routes.     

Flight directionality of Tribolium castaneum soon after take‐off under glasshouse and field conditions

Flight directionality of the rust‐red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), was investigated under glasshouse and field conditions using sticky traps placed around dense experimental infestations of T. castaneum derived from field‐collected samples. Although beetles of this species are known to fly quite readily, information on flight of beetles away from grain resources is limited. Under still glasshouse conditions, T. castaneum does not demonstrate strong horizontal or vertical trajectories in their initial flight behaviour. Flight was significantly directional in half of the replicates, but trapped beetles were only weakly concentrated around the mean direction of flight. In the field, by contrast, emigration of T. castaneum was strongly directional soon after flight initiation. The mean vector lengths were generally >0.5 which indicates that trapped beetles were strongly concentrated around the calculated mean flight direction. A circular‐circular regression of mean flight vs. mean downwind direction suggested that flight direction was generally correlated with downwind direction. The mean height at which T. castaneum individuals initially flew was 115.4 ± 7.0 cm, with 58.3% of beetles caught no more than 1 m above the ground. The height at which beetles were trapped did not correlate with wind speed at the time of sampling, but the data do indicate that wind speed significantly affected T. castaneum flight initiation, because no beetles (or very few; no more than three) were trapped in the field when the mean wind speed was above 3 m s^?1. This study thus demonstrates that wind speed and direction are both important aspects of flight behaviour of T. castaneum, and therefore of the spatio‐temporal dynamics of this species.     

Visual Matching in the Orientation of Desert Ants (Melophorus bagoti): The Effect of Changing Skyline Height

Ants are known to use the terrestrial visual panorama in navigation. Recent evidence has accumulated for the use of the currently perceived visual panorama to determine a direction to head in. The pattern of the height of the terrestrial surround, the skyline, is one key cue for the Central Australian red honey ant Melophorus bagoti in determining a direction of travel. But ants might also possess some mechanism to match the skyline heights encountered during training, which functions to steer away from regions whose skyline is too high and towards regions whose skyline is too low. We made an initial test of this hypothesis by training ants to visit a feeder centred between two experimentally constructed walls of black cloth. Trained ants were then tested for their initial homing direction with the walls retaining their heights as encountered in training (controls), with one of the walls lowered or raised in height, or with one wall lowered and the opposite wall raised. Wall‐height manipulations deflected the initial headings of ants towards the lower wall, with combined wall lowering and wall raising changing the initial headings by ~30° when compared with controls. The results suggest that the ants combined the dictates of the panorama in determining the best direction of travel (a heading towards the nest) with some attractor mechanism that functions to establish the skyline heights of training conditions (a heading towards the lower wall).     

Harvesting resources in groups or alone: the case of renewing patches

Group foraging has been proposed to be the most efficient mannerwith which to exploit habitats with renewing patches as individualsin groups are less likely to revisit patches that have alreadybeen exploited recently by others. However, to avoid a group-selectionargument, it is necessary to compare the success of solitaryand group foraging tactics when each competes with the other.We used a genetic algorithm approach to examine the costs andbenefits of exploiting renewing resources in a spatially andtemporally explicit habitat, thus controlling the time courseof resource renewal and including the time cost of travelingbetween patches, which may be a significant factor for groupforagers that deplete patches more quickly. Results indicatethat group foragers fare more poorly than an equivalent numberof solitary foragers in the same habitat unless the rate ofresource renewal is very low. The low revisitation rate by groupforagers allows resources to replenish more fully, thus maintainingthe resource level across the habitat at a higher level. Incontrast, solitary foragers, who revisit previously exploitedpatches more often, maintain the same resources at a lower level.Nevertheless, a pure population of group foragers can be readilyinvaded by solitary foragers even when the rate of renewal isat low levels. We conclude that while group foraging may bean efficient tactic to exploit renewing resources, it is nota stable strategy under the circumstances examined in this model.     

Evidence for adaptive design in human gaze preference

Many studies have investigated the physical cues that influence face preferences. By contrast, relatively few studies have investigated the effects of facial cues to the direction and valence of others' social interest (i.e. gaze direction and facial expressions) on face preferences. Here we found that participants demonstrated stronger preferences for direct gaze when judging the attractiveness of happy faces than that of disgusted faces, and that this effect of expression on the strength of attraction to direct gaze was particularly pronounced for judgements of opposite-sex faces (study 1). By contrast, no such opposite-sex bias in preferences for direct gaze was observed when participants judged the same faces for likeability (study 2). Collectively, these findings for a context-sensitive opposite-sex bias in preferences for perceiver-directed smiles, but not perceiver-directed disgust, suggest gaze preference functions, at least in part, to facilitate efficient allocation of mating effort, and evince adaptive design in the perceptual mechanisms that underpin face preferences.     

Pushing versus pulling: division of labour between tarsal attachment pads in cockroaches

Adhesive organs on the legs of arthropods and vertebrates are strongly direction dependent, making contact only when pulled towards the body but detaching when pushed away from it. Here we show that the two types of attachment pads found in cockroaches (Nauphoeta cinerea), tarsal euplantulae and pretarsal arolium, serve fundamentally different functions. Video recordings of vertical climbing revealed that euplantulae are almost exclusively engaged with the substrate when legs are pushing, whereas arolia make contact when pulling. Thus, upward-climbing cockroaches used front leg arolia and hind leg euplantulae, whereas hind leg arolia and front leg euplantulae were engaged during downward climbing. Single-leg friction force measurements showed that the arolium and euplantulae have an opposite direction dependence. Euplantulae achieved maximum friction when pushed distally, whereas arolium forces were maximal during proximal pulls. This direction dependence was not explained by the variation of shear stress but by different contact areas during pushing or pulling. The changes in contact area result from the arrangement of the flexible tarsal chain, tending to detach the arolium when pushing and to peel off euplantulae when in tension. Our results suggest that the euplantulae in cockroaches are not adhesive organs but 'friction pads', mainly providing the necessary traction during locomotion.     

Young flying squirrels (Pteromys volans) dispersing in fragmented forests

Dispersal is a key determinant of the population dynamics ofspecies. Thus, a better understanding of how dispersal is affectedby the landscape structure and how animals make decisions aboutmoving across different landscapes is needed. We studied thedispersal of 60 radio-collared juvenile Siberian flying squirrels(Pteromys volans) in southern Finland. The effect of landscapestructure on selected dispersal direction, dispersal distance,and straightness of dispersal path was studied. Flying squirrelswere capable of dispersing over long distances in fragmentedforest landscapes. The patches used as temporary roosting sitesduring dispersal were of a lower quality than were those usedas finally occupied patches. The patches used were larger thanwere patches on average in the study areas. There was a veryclear directional bias in the dispersal path (i.e., it was nearlya straight line), which remained over a large scale, but wide-openareas obstructed the straightness of the path. As the distancesbetween crossed patches increased, short-distance disperserswere found further away from their natal home range. However,there were no differences in the landscape that could explainthe differences between individuals in decisions to remain philopatricor to become short- or long-distance dispersers. In addition,whereas short-distance dispersers dispersed in random directions,long-distance dispersers started to disperse in directions dominatedby preferred habitat. Thus, there were behavioral differencesbetween dispersers. Our results supported the hypotheses statingthat individuals decide to disperse long or short distancesbefore the onset of dispersal.     

Pore Direction in Relation to Anisotropy of Mechanical Strength in a Cubic Starch Compact

The purpose of this research was to evaluate the relation between preferential direction of pores and mechanical strength of cubic starch compacts. The preferential pore direction was quantified in SEM images of cross sections of starch compacts using a previously described algorithm for determination of the quotient of transitions (Q). This parameter and the mechanical strength were evaluated in compacts of different porosities. Starch was chosen as a model compound for materials with ductile behaviour of which tablets with low porosities can be made and which shows some elastic recovery after compaction. At medium and high porosity Q was significantly higher in the images providing a side view of the compact than in the images providing a top view (0.973 vs. 0.927 and 0.958 vs. 0.874 at 0 mm from the side of the compact and 0.956 vs. 0.854 and 0.951 vs. 0.862 at 3.5 mm), indicating that the pores were mainly oriented in the direction perpendicular to the direction of compression. This was accompanied by a lower crushing force in this direction. This could be explained by considering the pores as cracks which propagate through the sample during crushing. For both directions the crushing force decreased with increasing porosity. The yield strength of the compacts also decreased with increasing porosity, but this parameter was not dependent on the direction of crushing when the porosity was below 10%. The results show that pore direction significantly influences the crushing force but does not influence the yield strength, at porosities below 10%.