Redesign of catalytic center of an enzyme: aspartic to serine proteinase

In an attempt to convert an aspartic proteinase into another class of proteinase, the catalytic residues of porcine pepsin were substituted with the catalytic triad characteristic of a serine proteinase, using trypsin as the model. Computer modeling suggested six possible sites within porcine pepsin sequence for the introduction of the catalytic triad. The six mutants of pepsin were subsequently constructed and examined for their catalytic activities. Among the six mutants, two mutants, D32S/I300H/G302D (MutI) and D32G/S35H/Y75S/I120D (MutJ), showed peptide hydrolysis activities. In comparison to the original activity of pepsin, the kinetic constants of these mutants were very low with K(m) values of 4.10 and 2.10mM, and k(0) values of 22.2 and 18.0 min(-1). In the presence of PMSF, a serine proteinase inhibitor, the activities for these mutants were inhibited by 86.5% and 80.1%, respectively, indicating that the catalytic triad of the trypsin had been successfully introduced into porcine pepsin.     

Spontaneous mutagenesis in haploid and diploid Saccharomyces cerevisiae

To obtain insights into the mechanisms of spontaneous mutations in Saccharomyces cerevisiae, we have characterized the genetic alterations that inactivate either the CAN1 gene in haploid cells or heterozygously situated in diploid cells. The mutation rate in haploid cells was 9.08 x 10(-7), 100-fold lower than that in diploid cells (1.03 x 10(-4)). In haploid cells, among 69 independent CAN1 mutations, 75% were base substitutions and 22% frameshifts. The base substitutions were both transitions (33%) and transversions (42%), with G:C-->A:T and G:C-->T:A dominating. Minus frameshifts (12%) and plus frameshifts (10%) were also observed at run and non-run bases, and at A:T and G:C pairs with almost equal efficiency. An analysis of chromosome structure in diploid yeast cells indicated that allelic crossover was the predominant event followed by gene conversion and chromosome loss. We argued that genetic alterations leading to spontaneous phenotypic changes in wild-type diploid yeast cells occurred through two steps; replication-dependent alterations of bases in either allele then recombination-dependent transfer of the mutated allele to the intact one.     

Investigation of the role of a second conserved serine in carboxylesterases via site-directed mutagenesis

Carboxylesterases are enzymes that catalyze the hydrolysis of ester and amide moieties. These enzymes have an active site that is composed of a nucleophile (Ser), a base (His), and an acid (Glu) that is commonly known as a catalytic triad. It has previously been observed that the majority of carboxylesterases and lipases contain a second conserved serine in their active site [Proteins, 34 (1999) 184]. To investigate whether this second serine is also involved in the catalytic mechanism, it was mutated to an alanine, a glycine or a cysteine. Site-directed mutagenesis of this conserved serine resulted in a loss of specific activity, in both the S247G and S247A mutants (5- to 15-fold), which was due to a decrease in the rate of catalysis (kcat). Due to the instability of the S247C mutant no reliable data could be attained. A carbamate inhibitor, carbaryl, was then employed to investigate whether this decrease in the kcat was due to the rate of formation of the acyl-enzyme intermediate (k2) or the rate of deacylation (k3). The S247A mutant was found only to alter k2 (2.5-fold decrease), with no effect on k3. Together with information inferred from a human carboxylesterase crystal structure, it was concluded that this serine provides an important structural support for the spatial orientation of the glutamic acid, stabilizing the catalytic triad so that it can perform the hydrolysis.     

Multiple site-directed mutagenesis of more than 10 sites simultaneously and in a single round

Site-directed mutagenesis is a powerful tool to explore the structure-function relationship of proteins, but most traditional methods rely on the mutation of only one site at a time and efficiencies drop drastically when more than three sites are targeted simultaneously. Many applications in functional proteomics and genetic engineering, including codon optimization for heterologous expression, generation of cysteine-less proteins, and alanine-scanning mutagenesis, would greatly benefit from a multiple-site mutagenesis method with high efficiency. Here we describe the development of a simple and rapid method for site-directed mutagenesis of more than 10 sites simultaneously with up to 100% efficiency. The method uses two terminal tailed primers with a unique 25-nucleotide tail each that are simultaneously annealed to template DNA together with the set of mutagenic primers in between. Following synthesis of the mutant strand by primer extension and ligation with T4 DNA polymerase and ligase, the unique mutant strand-specific tails of the terminal primers are used as anchors to specifically amplify the mutant strand by high-fidelity polymerase chain reaction. We have employed this novel method to mutate simultaneously all 9 and 11 CUG leucine codons of the Hyg and Neo resistance genes, respectively, to the Candida albicans-friendly UUG leucine codon at 100% efficiency.     

Prediction of the binding site on E1 in the assembly of the pyruvate dehydrogenase multienzyme complex of Bacillus stearothermophilus

The beta-subunit (E1beta) of the pyruvate decarboxylase (E1, alpha(2)beta(2)) component of the Bacillus stearothermophilus pyruvate dehydrogenase complex was comparatively modelled based on the crystal structures of the homologous 2-oxoisovalerate decarboxylase of Pseudomonas putida and Homo sapiens. Based on this homology modelling, alanine-scanning mutagenesis studies revealed that the negatively charged side chain of Glu285 and the hydrophobic side chain of Phe324 are of particular importance in the interaction with the peripheral subunit-binding domain of the dihydrolipoyl acetyltransferase component of the complex. These results help to identify the site of interaction on the E1beta subunit and are consistent with thermodynamic evidence of a mixture of electrostatic and hydrophobic interactions being involved.     

Characterization of auto-regulation of the human cardiac α1 subunit of the L-type calcium channel: Importance of the C-terminus

The carboxyl terminal of the L-type calcium channel _1C subunit comprises approximately one third of the primary structure of the ₁ subunit (> 700 amino acids residues). This region is sensitive to limited posttranslational processing. In heart and brain the _1C subunits are found to be truncated but the C-terminal domain remains functionally present. Based on our previous data we hypothesized that the distal C-terminus (approximately residues 1650–1950) harbors an important, predominantly inhibitory domain. We generated C-terminal-truncated _1C mutants, and after expressing them in combination with a ₃ subunit in HEK-293 cells, electrophysiological experiments were carried out. In order to dissect the important inhibitory part of the C-terminus, trypsin was dialyzed into the cells. The data provide evidence that there are multiple residues within the inhibitory domain that are crucial to the inhibitory process as well as to the enhancement of expressed current by intracellular application of proteases. In addition, the expression of the chimeric mutant _1C1673-DRK₁ demonstrated that the C-terminal is specific for the heart channel.     

Anaerobiospirillum succiniciproducens phosphoenolpyruvate carboxykinase: mutagenesis at metal site 2

Phosphoenolpyruvate (PEP) carboxykinases harbor two divalent metal-binding sites. One cation interacts with the enzyme (metal binding site 1) to elicit activation, while a second cation (metal binding site 2) interacts with the nucleotide to serve as the metal nucleotide substrate. Mutants of Anaerobiospirillum succiniciproducens PEP carboxykinase have been constructed where Thr249 and Asp262, two residues of metal binding site 2 of the enzyme, were altered. Binding of the 3'(2')-O-(N-methylantraniloyl) derivative of ADP provides a test of the structural integrity of these mutants. The conservative mutation (Asp262Glu) retains a significant proportion of the wild type enzymatic activity. Meanwhile, removal of the OH group of Thr249 in the Thr249Ala mutant causes a decrease in V(max) by a factor of 1.1 x 10(4). Molecular modeling of wild type and mutant enzymes suggests that the lower catalytic efficiency of the Thr249Ala enzyme could be explained by a movement of the lateral chain of Lys248, a critical catalytic residue, away from the reaction center.     

Insights into catalysis by a knotted TrmD tRNA methyltransferase

The crystal structure of Escherichia coli tRNA (guanosine-1) methyltransferase (TrmD) complexed with S-adenosyl homocysteine (AdoHcy) has been determined at 2.5A resolution. TrmD, which methylates G37 of tRNAs containing the sequence G36pG37, is a homo-dimer. Each monomer consists of a C-terminal domain connected by a flexible linker to an N-terminal AdoMet-binding domain. The two bound AdoHcy moieties are buried at the bottom of deep clefts. The dimer structure appears integral to the formation of the catalytic center of the enzyme and this arrangement strongly suggests that the anticodon loop of tRNA fits into one of these clefts for methyl transfer to occur. In addition, adjacent hydrophobic sites in the cleft delineate a defined pocket, which may accommodate the GpG sequence during catalysis. The dimer contains two deep trefoil peptide knots and a peptide loop extending from each knot embraces the AdoHcy adenine ring. Mutational analyses demonstrate that the knot is important for AdoMet binding and catalytic activity, and that the C-terminal domain is not only required for tRNA binding but plays a functional role in catalytic activity.     

Site-directed mutagenesis of Escherichia coli acetylglutamate kinase and aspartokinase III probes the catalytic and substrate-binding mechanisms of these amino acid kinase family enzymes and allows three-dimensional modelling of aspartokinase

We test, using site-directed mutagenesis, predictions based on the X-ray structure of N-acetyl-L-glutamate kinase (NAGK), the paradigm of the amino acid kinase protein family, about the roles of specific residues on substrate binding and catalysis. The mutations K8R and D162E decreased V([sustrate]= infinity ) 100-fold and 1000-fold, respectively, in agreement with the predictions that K8 catalyzes phosphoryl transfer and D162 organizes the catalytic groups. R66K and N158Q increased selectively K(m)(Asp) three to four orders of magnitude, in agreement with the binding of R66 and N158 to the C(alpha) substituents of NAG. Mutagenesis in parallel of aspartokinase III (AKIII phosphorylates aspartate instead of acetylglutamate), another important amino acid kinase family member of unknown 3-D structure, identified in AKIII two residues, K8 and D202, that appear to play roles similar to those of K8 and D162 of NAGK, and supports the involvement of E119 and R198, similarly to R66 and N158 of NAGK, in the binding of the amino acid substrate, apparently interacting, respectively, with the alpha-NH(3)(+) and alpha-COO(-) of aspartate. These results and an improved alignment of the NAGK and AKIII sequences have guided us into 3-D modelling of the amino acid kinase domain of AKIII using NAGK as template. The model has good stereochemistry and validation parameters. It provides insight into substrate binding and catalysis, agreeing with mutagenesis results with another aspartokinase that were not considered when building the model.AKIII is homodimeric and is inhibited by lysine. Lysine may bind to a regulatory region that is C-terminal to the amino acid kinase domain. We make a C-terminally truncated AKIII (AKIIIt) and show that the C-region is involved in intersubunit interactions, since AKIIIt is found to be monomeric. Further, it is inactive, as demanded if dimer formation is essential for activity. Models for AKIII architecture are proposed that account for these findings.     

phi29 DNA polymerase residue Phe128 of the highly conserved (S/T)Lx(2)h motif is required for a stable and functional interaction with the terminal protein

Bacteriophage phi29 encodes a DNA-dependent DNA polymerase belonging to the eukaryotic-type (family B) subgroup of DNA polymerases that use a protein as primer for initiation of DNA replication. By multiple sequence alignments of DNA polymerases from such a family, we have been able to identify two amino acid residues specifically conserved in the protein-priming subgroup of DNA polymerases, a phenylalanine contained in the (S/T)Lx(2)h motif, and a glutamate belonging to the Exo III motif. Here, we have studied the functional role of these residues in reactions that are specific for DNA polymerases that use a protein-primed DNA replication mechanism, by site-directed mutagenesis in the corresponding amino acid residues, Phe128 and Glu161 of phi29 DNA polymerase. Mutations introduced at residue Phe128 severely impaired the protein-primed replication capacity of the polymerase, being the interaction with the terminal protein (TP) moderately (mutant F128A) or severely (mutant F128Y) diminished. As a consequence, very few initiation products were obtained, and essentially no transition products were detected. Interestingly, phi29 DNA polymerase mutant F128Y showed a decreased binding affinity for short template DNA molecules. These results, together with the high degree of conservation of Phe128 residue among protein-primed DNA polymerases, suggest a functional role for this amino acid residue in making contacts with the TP during the first steps of genome replication and with DNA in the further replication steps.