细胞固定化载体比表面的测定

为了衡量细胞固定化载体的性能。基于单分子层吸附理论,利用溶液中亚甲蓝染料在固形物表面的吸附倾向;建立了用于测定细胞固定化载体比表面的“动态染料吸附法”,方法学考察时以PVA-海藻酸钠的混合载体为例,结果表明四批次测量同一载体比表面的结果变异系数为5.5%,测量的载体比表面能精确反映载体内PVA,或是海藻酸钠浓度的变化,说明方法重复性好,灵敏度高,同时讨论了文献中“染料吸附法”测定比表面的不足。     

Novel contribution of cell surface and intracellular M1‐muscarinic acetylcholine receptors to synaptic plasticity in hippocampus

Muscarinic acetylcholine receptors (mAChRs) are well known to transmit extracellular cholinergic signals into the cytoplasm from their position on the cell surface. However, we show here that M1‐mAChRs are also highly expressed on intracellular membranes in neurons of the telencephalon and activate signaling cascades distinct from those of cell surface receptors, contributing uniquely to synaptic plasticity. Radioligand‐binding experiments with cell‐permeable and ‐impermeable ligands and immunohistochemical observations revealed intracellular and surface distributions of M1‐mAChRs in the hippocampus and cortex of rats, mice, and humans, in contrast to the selective occurrence on the cell surface in other tissues. All intracellular muscarinic‐binding sites were abolished in M1‐mAChR‐gene‐knockout mice. Activation of cell surface M1‐mAChRs in rat hippocampal neurons evoked phosphatidylinositol hydrolysis and network oscillations at theta rhythm, and transiently enhanced long‐term potentiation. On the other hand, activation of intracellular M1‐mAChRs phosphorylated extracellular‐regulated kinase 1/2 and gradually enhanced long‐term potentiation. Our data thus demonstrate that M1‐mAChRs function at both surface and intracellular sites in telencephalon neurons including the hippocampus, suggesting a new mode of cholinergic transmission in the central nervous system.     

Surface exploration of Amphibalanus amphitrite cyprids on microtextured surfaces

Microtopography is one of several strategies used by marine organisms to inhibit colonization by fouling organisms. While replicates of natural microtextures discourage settlement, details of larval interactions with the structured surfaces remain scarce. Close-range microscopy was used to quantify the exploration of cyprids of Amphibalanus amphitrite on cylindrical micropillars with heights of 5 and 30 μm and diameters ranging from 5 to 100 μm. While 5 μm-high structures had little impact, 30 μm-high pillars significantly influenced cyprid exploration. An observed step length decrease and step duration increase on 5 μm diameter pillars is attributed to the small dimensions of the voids excluding the cyprid's attachment disc and consequently reducing the area of adhesive contact. When exploring larger diameter pillars, cyprids preferred using the voids to form temporary attachment points. This may enhance their resistance to flow. No-choice assay settlement patterns mirrored this exploration behaviour, albeit in a pattern counter to what was predicted.     

Biofouling on polymeric heat exchanger surfaces with E. coli and native biofilms

The biofouling affinity of different polymeric surfaces (polypropylene, polysulfone, polyethylene terephthalate, and polyether ether ketone) in comparison to stainless steel (SS) was studied for the model bacterium Escherichia coli K12 DSM 498 and native biofilms originating from Rhine water. The biofilm mass deposited on the polymer surfaces was minimized by several magnitudes compared to SS. The cell count and the accumulated biomass of E. coli on the polymer surfaces showed an opposing linear trend. The promising low biofilm formation on the polymers is attributed to the combination of inherent surface properties (roughness, surface energy and hydrophobicity) when compared to SS. The fouling characteristics of E. coli biofilms show good conformity with the more complex native biofilms investigated. The results can be utilized for the development of new polymer heat exchangers when using untreated river water as coolant or for other processes needing antifouling materials.     

External surface area determination of lipid vesicles using trinitrobenzene sulfonate and ultraviolet/visible spectrophotometry

The lamellarity of liposomes is an important parameter to be controlled in liposomal delivery–release applications. A practical estimate of the degree of liposome lamellarity can be obtained by measuring the relative external surface area of the liposomes using a chemical assay. All such assays are based on a signal change caused by exposed marker lipids on reaction with a specific externally added reagent. However, a quantitative determination is often distorted by background reactions and contributions of internal lipid labeling. In the so-called TNBS assay, the marker lipid is phosphatidylethanolamine (PE) and the externally added reagent is TNBS (2,4,6-trinotrobenzene sulfonate). Mechanistic aspects of the TNBS assay were considered for improving the assay. Internal lipid labeling via PE flip-flop and/or TNBS permeation was minimal not only in cholesterol-containing liposomes but also in cholesterol-free liposomes if in the latter case membrane fluidity was decreased by slightly increasing the PE content. Compared with earlier versions of the TNBS assay, the amount of marker lipid and the time for analysis could be reduced considerably. The elaborated protocol was also applied to liposomes prepared from lipidic egg yolk isolates, offering a simple and inexpensive method for the development and in-process control of new liposome formation technologies.     

Tropical surface temperature response to vegetation cover changes and the role of drylands

Vegetation cover creates competing effects on land surface temperature: it typically cools through enhancing energy dissipation and warms via decreasing surface albedo. Global vegetation has been previously found to overall net cool land surfaces with cooling contributions from temperate and tropical vegetation and warming contributions from boreal vegetation. Recent studies suggest that dryland vegetation across the tropics strongly contributes to this global net cooling feedback. However, observation-based vegetation-temperature interaction studies have been limited in the tropics, especially in their widespread drylands. Theoretical considerations also call into question the ability of dryland vegetation to strongly cool the surface under low water availability. Here, we use satellite observations to investigate how tropical vegetation cover influences the surface energy balance. We find that while increased vegetation cover would impart net cooling feedbacks across the tropics, net vegetal cooling effects are subdued in drylands. Using observations, we determine that dryland plants have less ability to cool the surface due to their cooling pathways being reduced by aridity, overall less efficient dissipation of turbulent energy, and their tendency to strongly increase solar radiation absorption. As a result, while proportional greening across the tropics would create an overall biophysical cooling feedback, dryland tropical vegetation reduces the overall tropical surface cooling magnitude by at least 14%, instead of enhancing cooling as suggested by previous global studies.     

Ocellatin‐PT antimicrobial peptides: High‐resolution microscopy studies in antileishmania models and interactions with mimetic membrane systems

Although the mechanism of action of antimicrobial peptides (AMPs) is not clear, they can interact electrostatically with the cell membranes of microorganisms. New ocellatin‐PT peptides were recently isolated from the skin secretion of Leptodactylus pustulatus. The secondary structure of these AMPs and their effect on Leishmania infantum cells, and on different lipid surface models was characterized in this work. The results showed that all ocellatin‐PT peptides have an α‐helix structure and five of them (PT3, PT4, PT6 to PT8) have leishmanicidal activity; PT1 and PT2 affected the cellular morphology of the parasites and showed greater affinity for leishmania and bacteria‐mimicking lipid membranes than for those of mammals. The results show selectivity of ocellatin‐PTs to the membranes of microorganisms and the applicability of biophysical methods to clarify the interaction of AMPs with cell membranes.     

Modelling time‐varying low‐temperature‐induced mortality rates for pupae of Tuta absoluta (Gelechiidae,Lepidoptera)

In a series of laboratory experiments, acclimated pupae of Tuta absoluta were exposed to various constant low temperatures in order to estimate their maximum survival times (Kaplan–Meier, Lt_99.99). A Weibull function was fitted to the data points, describing maximum survival time as a function of temperature. In another experiment at ?6°C, the progress of mortality increasing with exposure time was identified. These values were fitted by a sigmoidal function converging asymptotically to 100% mortality for very long exposure times. Analysing mortality data from the maximum survival experiment by a generalized linear model showed a significant common slope parameter (p < .001) that reveals parallelism of the survival curves at each temperature if a log time axis is used. These curves appear stretched (time scaled) if plotted with a nonlogarithmic time axis. By combining these mathematical relations, it was possible to calculate a species‐specific ‘mortality surface’ which exhibits mortalities, depending on temperature and duration of exposure. In order to accumulate hourly mortalities for courses of varying temperatures, an algorithm was developed which yields mortality values from that surface taking into account the attained mortality level. In validation experiments, recorded mortalities were compared against modelled mortalities. Prediction of mortality was partially supported by the model, but pupae experiencing intensely fluctuating temperatures showed decreased mortality, probably caused by rapid cold hardening during exposure. Despite this observation, mortality data converged to distinct levels very close to 100% depending on the intensity of temperature fluctuations that were characteristic for different types of experiments. The highest mortality limit occurred at intensely fluctuating temperatures in laboratory experiments. This constituted a benchmark that was not reached under various field conditions. Thus, it was possible to identify temperature limits for the extinction of field populations of Tuta absoluta pupae.     

Characterization of the sugar-binding specificity of the toxic lectins isolated from Abrus pulchellus seeds

The sugar-binding specificity of the toxic lectins from Abrus pulchellus seeds was investigated by combination of affinity chromatography of glycopeptides and oligosaccharides of well-defined structures on a lectin-Sepharose column and measurement of the kinetic interactions in real time towards immobilized glycoproteins. The lectins showed strong affinity for a series of bi- and triantennary N-acetyllactosamine type glycans. The related asialo-oligosaccharides interact more strongly with the lectins. The best recognized structures were asialo-glycopeptides from fetuin. Accordingly, the kinetic interaction with immobilized asialofetuin was by far the most pronounced. Human and bovine lactotransferrins and human serotransferrin interacted to a lesser extent. The interaction with asialofetuin was inhibited by galactose in a dose dependent manner. Lactose, N-acetyllactosamine and lacto-N-biose exhibited similar degree of inhibition while N-acetylgalactosamine was a poor inhibitor. These results suggested that the carbohydrate-binding site of the Abrus pulchellus lectins was specific for galactose and possess a remarkable affinity for the sequences lactose [-D-Gal-(14)-D-Glc], N-acetyllactosamine [-D-Gal-(14)-D-GlcNAc] and lacto-N-biose [-D-Gal-(13)-D-GlcNAc].     

Impact of Land-Use Patterns on Chemical Properties of Trace Elements in Soils of Rural,Semi-Urban,and Urban Zones of the Niger Delta,Nigeria

The study of the concentrations of Cr, Zn, Cd, Pb, Ni, and Cu in soils under different land uses in rural, semi-urban, and urban zones in the Niger Delta was carried out with a view to providing information on the effects of the different land uses on the concentrations of trace elements in soils. Our results indicate significant variability in concentrations of these metals in soils under different land uses in rural, semi-urban, and urban zones. The maximum concentrations of metals in the examined soil samples were 707.5 mg.kg^?1, 161.0 mg.kg^?1, 2.6 mg.kg^?1, 59.6 mg.kg^?1, 1061.3 mg.kg^?1, and 189.2 mg.kg^?1 for Cr, Zn, Cd, Pb, Ni, and Cu, respectively. In the rural zone, the cassava processing mill is a potent source of Ni, Cr, Cu, and Zn while agricultural activities are a source of Cd, and automobile emissions and the use of lead oxide batteries constitute the major sources of Pb. In the urban zone, soils around the wood processing mill showed elevated concentrations of Cu, Cr, Zn, and Ni, while soils around automobile mechanic works and motor parks showed elevated levels of Pb. Elevated Cd concentrations were observed in soils under the following land uses: urban motor park, playground, welding and fabrication sheds, and metallic scrap dump. The contamination/pollution index of metals in the soil follows the order: Ni > Cd > Cr > Zn > Cu > Pb. The multiple pollution index of metals at different sites were greater than 1, indicating that these soils fit into “slight pollution” to “excessive pollution” ranges with significant contributions from Cr, Zn, Cd, Ni, and Cu.