Intrachain disulfide bond in the core hinge region of human IgG4.

IgG is a tetrameric protein composed of two copies each of the light and heavy chains. The four-chain structure is maintained by strong noncovalent interactions between the amino-terminal half of pairs of heavy-light chains and between the carboxyl-terminal regions of the two heavy chains. In addition, interchain disulfide bonds link each heavy-light chain and also link the paired heavy chains. An engineered human IgG4 specific for human tumor necrosis factor-alpha (CDP571) is similar to human myeloma IgG4 in that it is secreted as both disulfide bonded tetramers (approximately 75% of the total amount of IgG) and as tetramers composed of nondisulfide bonded half-IgG4 (heavy chain disulfide bonded to light chain) molecules. However, when CDP571 was genetically engineered with a proline at residue 229 of the core hinge region rather than serine, CDP571 (S229P), or with an IgG1 rather than IgG4 hinge region, CDP571(gamma 1), only trace amounts of nondisulfide bonded half-IgG tetramers were observed. Trypsin digest reversephase HPLC peptide mapping studies of CDP571 and CDP571(gamma 1) with on-line electrospray ionization mass spectroscopy supplemented with Edman sequencing identified the chemical factor preventing inter-heavy chain disulfide bond formation between half-IgG molecules: the two cysteines in the IgG4 and IgG1 core hinge region (CPSCP and CPPCP, respectively) are capable of forming an intrachain disulfide bond. Conformational modeling studies on cyclic disulfide bonded CPSCP and CPPCP peptides yielded energy ranges for the low-energy conformations of 31-33 kcal/mol and 40-42 kcal/mol, respectively. In addition, higher torsion and angle bending energies were observed for the CPPCP peptide due to backbone constraints caused by the extra proline. These modeling results suggest a reason why a larger fraction of intrachain bonds are observed in IgG4 rather than IgG1 molecules: the serine in the core hinge region of IgG4 allows more hinge region flexibility than the proline of IgG1 and thus may permit formation of a stable intrachain disulfide bond more readily.     

The Human Obesity Gene Map: The 1996 Update

An update of the human obesity gene map up to October 1996 is presented. Evidence from Mendelian disorders exhibiting obesity as a clinical feature, single-gene mutation rodent models, quantitative trait loci uncovered in crossbreeding experiments with mouse, rat, and pig models, association and case-control studies with candidate genes, and linkage studies with genes and other markers is reviewed. All chromosomal locations of the animal loci are converted into human genome locations based on syntenic relationships between the genomes. A complete listing of all these loci reveals that only 4 of the 24 human chromosomes are not yet represented, i.e., 9, 18, 21, and Y. Several chromosome arms are characterized by the presence of several putative loci. The following arms include at least three such loci: 1p, 1q, 3p, 4q, 6p, 7q, 8p, 8q, 11p, 11q, 15q, 20q, and Xq. Studies with negative association and linkage results are also reviewed.     

Mapping of the spectral density function of a Cα−Hα bond vector from NMR relaxation rates of a 13C-labelled α-carbon in motilin

Summary The peptide hormone motilin was synthesised with a ¹³C-enriched -carbon in the leucine at position 10. In aqueous solution, six different relaxation rates were measured for the ¹³C–H fragment as a function of temperature and with and without the addition of 30% (v/v) of the cosolvent d ₂-1,1,1,3,3,3-hexafluoro-2-propanol (HFP). The relaxation rates were analysed employing the spectral density mapping technique introduced by Peng and Wagner [(1992) J. Magn. Reson., 98, 308–322] and using the model-free approach by Lipari and Szabo [(1982) J. Am. Chem. Soc., 104, 4546–4570]. The fit to various models of dynamics was also considered. Different procedures to evaluate the overall rotational correlation time were compared. A single exponential time correlation function was found to give a good fit to the measured spectral densities only for motilin in 30% (v/v) HFP at low temperatures, whereas at high temperatures in this solvent, and in D₂O at all temperatures, none of the considered models gave an acceptable fit. A new empirical spectral density function was tested and found to accurately fit the experimental spectral density mapping points. The application of spectral density mapping based on NMR relaxation data for specific ¹³C–¹H vector is shown to be a highly useful method to study biomolecular dynamics. Advantages are high sensitivity, high precision and uniform sampling of the spectral density function over the frequency range.Abbreviations CD circular dichroism - NOE nuclear Overhauser enhancement - NOESY two-dimensional NOE spectroscopy - INEPT insensitive nuclei enhanced by polarisation transfer - DANTE delays alternating with nutations for tailored excitation - WALTZ-16 wideband, alternating phase, low-power technique for zero residual splitting - FID Free induction decay - ppm parts per million - TSPA 3-trimethylsilyl-(3,3,2,2-d)-propionic acid - HFP d ₂-1,1,1,3,3,3-hexafluoro-2-propanol - CPMG Carr-Purcell-Meiboom-Gill - TFD time-resolved fluorescence depolarisation - CSA chemical shift anisotropy Partly presented at the symposium Dynamics and Function of Biomolecules, Szeged, Hungary, July 31–August 2, 1993.     

Immunochemical characterisation and epitope mapping of a novel fimbrial protein (Pg-II fimbria) of Porphyromonas gingivalis

Abstract Mouse monoclonal antibody (mAb) Pgf-II specific for a 72-kDa major cell-surface protein (72K-CSP) derived from Porphyromonas gingivalis OMZ 409 was prepared. Immunoblotting analysis revealed that mAb Pgf-II reacted with 72K-CSP but not with 41-kDa fimbrial subunit protein (41K-fimbrilin) derived from P. gingivalis 381. Electron microscopic observation revealed that P. gingivalis OMZ 409 possessed peritrichous, thin fimbriae on their surface. Immunogold electron microscopy also demonstrated that mAb Pgf-II bound to the 72K-CSP examined with the gold particles arranged along the fibril array originating from the cell surface of the bacteria. These findings suggested that P. gingivalis 72K-CSP was identifiable as another fimbriae (termed Pg-II fimbriae) different from the fimbriae (termed Pg-I fimbriae) composed of a 41K-fimbrilin. Using multipin peptide synthesis technology, 102 sequential overlapping peptides covering the entire 514 amino-acid stretch of Pg-II fimbriae were synthesised. Seven immunodominant regions within Pg-II fimbrial protein molecule, which definitely reacted with the serum of patients with periodontal diseases, were detected.     

Physical mapping of plastid DNA variation among eleven Nicotiana species

Summary Plastid DNA of seven American and four Australian species of the genus Nicotiana was examined by restriction endonuclease analysis using the enzymes Sal I, Bgl I, Pst I, Kpn I, Xho I, Pvu II and Eco RI. These endonucleases collectively distinguish more than 120 sites on N. tabacum plastid DNA. The DNAs of all ten species exhibited restriction patterns distinguishable from those of N. tabacum for at least one of the enzymes used. All distinctive sites were physically mapped taking advantage of the restriction cleavage site map available for plastid DNA from Nicotiana tabacum (Seyer et al. 1981). This map was extended for the restriction endonucleases Pst I and Kpn I. In spite of variation in detail, the overall fragment order was found to be the same for plastid DNA from the eleven Nicotiana species. Most of the DNA changes resulted from small insertions/deletions and, possibly, inversions. They are located within seven regions scattered along the plastid chromosome. The divergence pattern of the Nicotiana plastid chromosomes was strikingly similar to that found in the genus Oenothera subsection Euoenothera (Gordon et al. 1982). The possible role of replication as a factor in the evolution of divergence patterns is discussed. The restriction patterns of plastid DNA from species within a continent resembled each other with one exception in each instance. The American species N. repanda showed patterns similar to those of most Australian species, and those of the Australian species N. debneyi resembled those of most American species.Abbreviations ims isonuclear male sterile - ptDNA plastid chloroplast DNA - Rubisco ribulosebisphosphate carboxylase/oxygenase - kbp kilobase pairs - LSU large subunit of Rubisco     

Inheritance and mapping of isoenzymes in pea (Pisum sativum L.)

Summary Three isoenzyme systems (amylase, esterase and glutamate oxaloacetate transaminase) were examined in seeds of pea (Pisum sativum L.) and shown to give clear variation in their band patterns on gel electrophoresis between different lines. The inheritance of these isoenzyme systems, and the location of their genes on the pea genome was investigated. Reciprocal crosses were made between lines, F2 seeds were analysed for segregation in the band patterns of the isoenzymes, and F2 plants were investigated to find linkage between the genes for these isoenzymes and genes for selected morphological markers. The results obtained showed that each of the investigated isoenzyme systems is genetically controlled by co-dominant alleles at a single locus. The gene for amylase was found to be on chromosome 2, linked to the loci k and wb (wb ... 9 ... k ... 25 ... Amy). The gene for esterase was found to be linked with the gene Br (chromosome 4) but the exact location is uncertain because of the lack of the morphological markers involved in the cross. The gene for glutamate oxaloacetate transaminase was found to be on chromosome 1 and linked with the loci a and d (a... 24... Got... 41 ... d).     

Molecular cloning of the Escherichia coli K-12 entACGBE genes

Abstract A 7-kb piece of Escherichia coli DNA that contains five genes ( entA, C, G, B and E ) required for the biosynthesis of the iron transport molecule enterochelin was isolated. A restriction map was constructed and proteins specified by the E. coli DNA were identified in mini- and maxicell systems. Plasmids containing portions of the entACGBE DNA generated by BAL31 digestion or restriction enzyme treatment were constructed; complementation studies done with these indicated that the five genes constitute an operon. The approximate site of the promoter was determined and the product of entE was tentatively identified as an M _r 63000 polypeptide.     

Isolation and complete nucleotide sequence of the gene for bovine parathyroid hormone

The structure of the bovine parathyroid hormone (PTH) gene has been analyzed by Southern blot hybridization of genomic DNA and by nucleotide sequence analysis of a cloned PTH gene. In the Southern analysis, several restriction enzymes produced single fragments that hybridized to PTH cDNA suggesting that there is a single bovine PTH gene. The restriction map of the cloned gene is the same as that determined by Southern blot analysis of bovine DNA. The sequence of 3154 bp of the cloned gene has been determined including 510 bp and 139 bp in the 5' and 3' flanking regions, respectively. The gene contains two introns which separate three exons that code primarily for: (i) the 5' untranslated region, (ii) the pre-sequence of preProPTH, and (iii) PTH and the 3' untranslated region. The gene contains 68% A + T and unusually long stretches of 100- to 150-bp sequences containing alternating A and T nucleotides in the 5' flanking region and intron A. The 5' flanking region contains two TATA sequences, both of which appear to be functional as determined by S1 nuclease mapping. Compared to the rat and human genes, the locations of the introns are identical but the sizes differ. Comparable human and bovine sequences in the flanking regions and introns are about 80% homologous.