Protein structural plasticity exemplified by insertion and deletion mutants in T4 lysozyme.

To further investigate the ways in which proteins respond to changes in the length of the polypeptide chain, a series of 32 insertions and five deletions were made within nine different alpha-helices of T4 lysozyme. In most cases, the inserted amino acid was a single alanine, although in some instances up to four residues, not necessarily alanine, were used. Different insertions destabilized the protein by different amounts, ranging from approximately 1 to 6 kcal/mol. In one case, no protein could be obtained. An "extension" mutant in which the carboxy terminus of the molecule was extended by four alanines increased stability by 0.3 kcal/mol. For the deletions, the loss in stability ranged from approximately 3 to 5 kcal/mol. The structures of six insertion mutants, as well as one deletion mutant and the extension mutant, were determined, three in crystal forms nonisomorphous with wild type. In all cases, including previously described insertion mutants within a single alpha-helix, there appears to be a strong tendency to preserve the helix by translocating residues so that the effects of the insertion are propagated into a bend or loop at one end or the other of the helix. In three mutants, even the hydrophobic core was disrupted so as to permit the preservation of the alpha-helix containing the insertion. Translocation (or "register shift") was also observed for the deletion mutant, in this case a loop at the end of the helix being shortened. In general, when translocation occurs, the reduction in stability is only moderate, averaging 2.5 kcal/mol. Only in the most extreme cases does "bulging" or "looping-out" occur within the body of an alpha-helix, in which case the destabilization is substantial, averaging 4.9 kcal/mol. Looping-out can occur for insertions close to the end of a helix, in which case the destabilization is less severe, averaging 2.6 kcal/mol. Mutant A73-[AAA] as well as mutants R119-[A] and V131-[A], include shifts in the backbone of 3-6 A, extending over 20 residues or more. As a result, residues 114-142, which form a "cap" on the carboxy-terminal domain, undergo substantial reorganizations such that the interface between this "cap" and the rest of the protein is altered substantially. In the case of mutant A73-[AAA], two nearby alpha-helices, which form a bend of approximately 105 degrees in the wild-type structure, reorganize in the mutant structure to form a single, essentially straight helix. These structural responses to mutation demonstrate the plasticity of protein structures and illustrate ways in which their three-dimensional structures might changes during evolution.     

多组多滞后区间系数定常非线性关联控制大系统的结构与关联鲁棒镇定(I)

建立了多组多滞后区间系数定常非线性控制系统的结构概念,采用鲁棒镇定的等价法,给出了具有扰动结构参数的多组多滞后区问系数定常非线性关联控制大系统的结构与关联鲁棒镇定,同时给出了扰动参数与滞后非线性项界线的估价公式。     

Derivation and testing of pair potentials for protein folding. When is the quasichemical approximation correct?

Many existing derivations of knowledge-based statistical pair potentials invoke the quasichemical approximation to estimate the expected side-chain contact frequency if there were no amino acid pair-specific interactions. At first glance, the quasichemical approximation that treats the residues in a protein as being disconnected and expresses the side-chain contact probability as being proportional to the product of the mole fractions of the pair of residues would appear to be rather severe. To investigate the validity of this approximation, we introduce two new reference states in which no specific pair interactions between amino acids are allowed, but in which the connectivity of the protein chain is retained. The first estimates the expected number of side-chain contracts by treating the protein as a Gaussian random coil polymer. The second, more realistic reference state includes the effects of chain connectivity, secondary structure, and chain compactness by estimating the expected side-chain contrast probability by placing the sequence of interest in each member of a library of structures of comparable compactness to the native conformation. The side-chain contact maps are not allowed to readjust to the sequence of interest, i.e., the side chains cannot repack. This situation would hold rigorously if all amino acids were the same size. Both reference states effectively permit the factorization of the side-chain contact probability into sequence-dependent and structure-dependent terms. Then, because the sequence distribution of amino acids in proteins is random, the quasichemical approximation to each of these reference states is shown to be excellent. Thus, the range of validity of the quasichemical approximation is determined by the magnitude of the side-chain repacking term, which is, at present, unknown. Finally, the performance of these two sets of pair interaction potentials as well as side-chain contact fraction-based interaction scales is assessed by inverse folding tests both without and with allowing for gaps.     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. I. Model studies using cyclic and linear peptides.

The high molecular weight (HMW) proteins from wheat contain a repetitive domain that forms 60-80% of their sequence. The consensus peptides PGQGQQ and GYYPTSPQQ form more than 90% of the domain; both are predicted to adopt beta-turn structure. This paper describes the structural characterization of these consensus peptides and forms the basis for the structural characterization of the repetitive HMW domain, described in the companion paper. The cyclic peptides cyclo-[PGQGQQPGQGQQ] (peptide 1), cyclo-[GYYPTSPQQGA] (peptide 2), and cyclo-[PGQGQQGYYPTSPQQ] (peptide 3) were prepared using a novel synthesis route. In addition, the linear peptides (PGQGQQ)n (n = 1, 3, 5) were prepared. CD, FTIR, and NMR data demonstrated a type II beta-turn structure at QPGQ in the cyclic peptide 1 that was also observed in the linear peptides 9PGQGQQ)n. A type I beta-turn was observed at YPTS and SPQQ in peptides 2 and 3, with additional beta-turns of either type I or II at GAGY (peptide 2) and QQGY (peptide 3). The proline in YPTS showed considerable cis/trans isomerization, with up to 50% of the population in the cis-conformation; the other prolines were more than 90% in the trans conformation. The conversion from trans to cis destroys the type I beta-turn at YPTS, but leads to an increase in turn character at SPQQ and GAGY (peptide 2) or QQGY (peptide 3).     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. II. Characterization in solution and in the dry state.

The structure of the central repetitive domain of high molecular weight HMW) wheat gluten proteins was characterized in solution and in the dry state using HMW proteins Bx6 and Bx7 and a subcloned, bacterially expressed part of the repetitive domain of HMW Dx5. Model studies of the HMW consensus peptides PGQGQQ and GYYPTSPQQ formed the basis for the data analysis (van Dijk AA et al., 1997, Protein Sci 6:637-648). In solution, the repetitive domain contained a continuous nonoverlapping series of both type I and type II II beta-turns at positions predicted from the model studies; type II beta-turns occurred at QPGQ and QQGY sequences and type I beta-turns at YPTS and SPQQ. The subcloned part of the HMW Dx5 repetitive domain sometimes migrated as two bands on SDS-PAGE; we present evidence that this may be caused by a single amino acid insertion that disturbs the regular structure of beta-turns. The type I beta-turns are lost when the protein is dried on a solid surface, probably by conversion to type II beta-turns. The homogeneous type II beta-turn distribution is compatible with the formation of a beta-spiral structure, which provides the protein with elastic properties. The beta-turns and thus the beta-spiral are stabilized by hydrogen bonds within and between turns. Reformation of this hydrogen bonding network after, e.g., mechanical disruption may be important for the elastic properties of gluten proteins.     

Identification of Influenza C Virus Phosphoproteins

The HMV-II cells infected with influenza C virus were labeled with inorganic [³²P]phosphate to identify phosphorylated proteins. Analysis by radioimmunoprecipitation with antiviral serum or monoclonal antibodies revealed that three major structural proteins of the virus, hemagglutinin-esterase (HE), nucleoprotein (NP), and matrix protein (M1) are all phosphorylated in both infected cells and virions. It was also observed that, in the presence of trypsin (10 μg/ml), the unphosphorylated form of the HE glycoprotein was cleaved efficiently whereas the phosphorylated form was not, raising the possibility that phosphorylation of HE may influence its susceptibility to degradation by proteolytic enzymes.     

Multiple molecular recognition properties of the lipocalin protein family

The lipocalins, a diverse family of small extracellular ligand proteins, display a remarkable range of different molecular properties. While their binding of small hydrophobic molecules, and to a lesser extent their binding to cell surface receptors, is well known, it is shown here that formation of macromolecular complexes is also a common feature of this family. Analysis of known crystallographic structures reveals that the lipocalins process a conserved common structure: an antiparallel β-barrel with a repeated +1 topology. Comparisons show that within this overall similarity the structure of individual proteins is specifically adapted to bind their particular ligands, forming a binding site from an internal cavity (within the barrel) and/or an external loop scaffold, which gives rise to different binding modes that reflects the need to accommodate ligands of different shape, size, and chemical structure. The architecture of the lipocalin fold suggests that the both the ends and sides of this barrel are topologically distinct, differences also apparent in analyses of structural and sequence variation within the family. These different can be linked to experimental evidence suggesting a possible functional dichotomy between the two ends of the lipocalin fold. The structurally invariant end of the molecule may be implicated in general binding small ligands and forming macromolecular complexes via an exposed binding surface.     

A procedure for detecting structural domains in proteins.

A procedure is described for detecting domains in proteins of known structure. The method is based on the intuitively simple idea that each domain should contain an identifiable hydrophobic core. By applying the algorithm described in the companion paper (Swindells MB, 1995, Protein Sci 4:93-102) to identify distinct cores in multi-domain proteins, one can use this information to determine both the number and the location of the constituent domains. Tests have shown the procedure to be effective on a number of examples, even when the domains are discontinuous along the sequence. However, deficiencies also occur when hydrophobic cores from different domains continue through the interface region and join one another.     

Twisted β-pleated sheet: the molecular conformation which possibly dictates the formation of the helicoidal architecture of several proteinaceous eggshells

Evidence from X-ray diffraction, laser-Raman spectroscopy, secondary structure prediction, freeze-fracturing, conventional electron microscopy and Fourier analysis suggests that the helicoidal structure of the silkmoth eggshell (chorion) is created by protein molecules, most probably in a twisted β-pleated sheet conformation. It is proposed that this conformation also dictates the formation of the helicoidal architecture of other proteinaceous eggshells; apparently, it may also play an important role in the formation of the helicoidal architecture in other biological systems with protein components.