防尘螨药物的实验室药效测试方法

建立防螨药物的药效测试装置与操作方法很有必要。由于尘螨形体微小 ,给防螨药效测试的操作带来诸多困难 ,作者利用螨虫的生物习性及特点 ,建立了布块集螨法、成螨自动分离与净化法、标定计数法 ,布块浸水计数法以及螨虫的驱避和杀灭效果的测试装置与测试方法。结果表明 ,采用成螨自动分离与净化法获得的成螨比例为 ( 94 0± 1 7) %;采用标定计数的精度 (成螨数 刻度 )为 ( 2 0 4± 6 6)只。标定计数 1 0 0 0只螨的实际回收率平均为 ( 75 9± 1 4 6) %,与手工计数无显著性差别 (P >0 0 5 )。实践表明 ,此技术与方法操作简便 ,结果可靠 ,使测试的速度及效果有明显提高     

林窗几何特征的测定方法

林窗面积、形状及边界木高是决定林窗环境异质性的3个林窗几何特征,影响林窗内植物更新。林窗几何特征的快速测量方法是林窗研究的基础,测量方法可分为2类:基于地面实际测量的地面法和基于林窗林冠照片的相片法。地面法费时费力,受人为因素影响大,可测量林冠林窗和扩展林窗的面积,但不能测量林窗形状和边界木高。相片法具有简单、客观、可重复的优点,但仅适用于林冠林窗。相片法共有5种:"平面相片法"、"航片法"、"半球面影像法"、"双半球面影像法"和"改进的半球面影像法"。前3种测量方法只能测量林冠林窗面积;"改进的半球面影像法"可测量林冠林窗面积和形状,且精度高于前3种相片法,但所需参数最多;"双半球面影像法"可测量林窗面积、形状及边界木高这3个林窗几何特征,且精度较高,但拍摄要求较高。     

向日葵茎芯多糖的提取工艺优化及其体外抗肿瘤活性研究

研究了向日葵茎芯中主要活性物质多糖的提取工艺,并对此工艺进行了优化,选取的提取方法为水提醇沉法,以多糖含量作为指标,采用单因素试验研究了提取次数、原料颗粒的大小（目数）、料液比、提取时间、提取温度对向日葵茎芯多糖含量的影响。用苯酚-硫酸法测定提取液中多糖的含量,得出向日葵茎芯中多糖的最佳提取工艺条件为：提取次数2次,原料颗粒的大小（目数）60~80目,料液比（g·mL^-1）1：50,提取时间3.0 h,提取温度90℃,在最优提取条件下,多糖的提取得率为6.56%,多糖的含量为266.03 mg·g^-1。本文也对多糖的体外抗肿瘤活性进行了研究,结果表明向日葵茎芯多糖的体外抗肿瘤活性较弱。这些条件的确定为向日葵茎芯的深入研究奠定了基础。     

新农合支付方式改革对患者住院均次费用的影响研究

目的 通过多种形式的新农合支付方式改革,提高参保人群的受益程度,有效控制患者住院均次费用的不合理增长,促进医疗机构内部运行机制的转变,提高医保资金的使用效率。方法 采集不同类别的医疗机构,不同支付方式的住院均次费用的增幅数据,进行改革前后的数据分析。结果 改革前后各级各类医院住院均次费用的逐年增幅差距很大,利用支付方式综合改革后的各级各类医疗机构患者住院均次费用得到控制。结论 多种形式的支付方式改革是影响医疗机构内部运行机制、降低住院均次费用增幅的有效手段。     

Tissue Aspiration and Inverse Finite Element Characterisation of Soft Tissues

In this work we examined the determination of soft tissue parameters via tissue aspiration experiments and inverse finite element characterisation. An aspiration tube was put against the target tissue. The deformation of the tissue inside the tube caused by weak suction was tracked with a video based system. A strain energy function was employed to model the elastic behaviour of soft tissue and viscoelasticity was accounted for by means of a quasi-linear viscoelastic formulation. Friction between the aspiration tube and the aspirated tissue was included in the model. Based on the assumed material model, an optimal set of material parameters was found, in order to best fit the experimental data obtained from ex-vivo experiments on pig kidney cortex. The inverse method resulted in robust determination of the unknown material parameters.     

Bone remodelling around the tibia due to total ankle replacement: effects of implant material and implant–bone interfacial conditions

Abstract

One of the major causes of implant loosening is due to excessive bone resorption surrounding the implant due to bone remodelling. The objective of the study is to investigate the effects of implant material and implant–bone interface conditions on bone remodelling around tibia bone due to total ankle replacement. Finite element models of intact and implanted ankles were developed using CT scan data sets. Bone remodelling algorithm was used in combination with FE analysis to predict the bone density changes around the ankle joint. Dorsiflexion, neutral, and plantar flexion positions were considered, along with muscle force and ligaments. Implant–bone interfacial conditions were assumed as debonded and bonded to represent non-osseointegration and fully osseointegration at the porous coated surface of the implant. To investigate the effect of implant material, three finite element models having different material combinations of the implant were developed. For model 1, tibial and talar components were made of Co–Cr–Mo, and meniscal bearing was made of UHMWPE. For model 2, tibial and talar components were made of ceramic and meniscal bearing was made of UHMWPE. For model 3, tibial and talar components were made of ceramic and meniscal bearing was made of CFR-PEEK. Changes in implant material showed no significant changes in bone density due to bone remodelling. Therefore, ceramic appears to be a viable alternative to metal and CFR-PEEK can be used in place of UHMWPE. This study also indicates that proper bonding between implant and bone is essential for long-term survival of the prosthetic components.     

The effectiveness of different planting frameworks for recruitment of tropical rainforest species on ex‐rainforest land

A long‐term rainforest restoration experiment was established on abandoned pasture in northeastern Queensland in 1993 to examine the effectiveness of five different restoration planting methods: (T1) control (no plantings); (T2) pioneer monoculture (planting seedlings of one pioneer species, Homalanthus novoguineensis, Euphorbiaceae); (T3) Homalanthus group framework method (H. novoguineensis and eight other pioneer species); (T4) Alphitonia group framework method (Alphitonia petriei, Rhamnaceae, with eight other pioneer species); and (T5) maximum diversity method (planting pioneers, middle‐phase species, and mature‐phase species). We investigated temporal patterns in the (1) fate of seedlings originally planted in 1993; (2) natural recruitment of native plant species; and (3) current habitat structure (canopy cover and ground cover of grasses and invasive plants) within each restoration treatment. A total of 97% of seedlings planted in T2 died within the first 13 years and all had died by 2014. A total of 72% of seedlings planted in T3, 55.5% of seedlings planted in T4, and 55% of seedlings planted in T5 also died by 2014. By 2014, 42 species from 21 families had recruited across the experimental site, and the abundance of recruits was almost twice that recorded in 2001 and 2006. Overall, T3, T4, and T5 had the greatest diversity and abundance of recruits. By 2014, canopy cover was greatest in T3, T4, and T5 but grass cover was least in T5. It is concluded that some restoration success measures increase with planting diversity, but overall the rate of recovery is similar in framework species and maximum diversity method.     

西瓜种子内源β-半乳甘露聚糖酶活性与分布以及与萌发速度的关系

利用单粒种子凝胶扩散法研究了β-半乳甘露聚糖酶在西瓜种子萌发过程中的分布以及与西瓜种子萌发速率的关系。结果发现,在胚根尖突破种皮前吸胀的西瓜种子中,内源β-半乳甘露聚糖酶主要分布于种子的胚膜套中,并起到减弱外种皮和胚膜套细胞壁对胚根伸出的机械阻力的作用。对具有不同萌发速率的品种以及引发处理和未处理的西瓜种子中酶活性的检测证明,β-半乳甘露聚糖酶活性与西瓜种子萌发速度相关。固体基质引发三倍体西瓜种子过程中β-半乳甘露聚糖酶的活化和种皮阻力的减弱,是引发种子提高了萌发速度和萌发能力的原因之一。     

Malaria Diagnosis: A Brief Review

Malaria is a major cause of death in tropical and sub-tropical countries, killing each year over 1 million people globally; 90% of fatalities occur in African children. Although effective ways to manage malaria now exist, the number of malaria cases is still increasing, due to several factors. In this emergency situation, prompt and effective diagnostic methods are essential for the management and control of malaria. Traditional methods for diagnosing malaria remain problematic; therefore, new technologies have been developed and introduced to overcome the limitations. This review details the currently available diagnostic methods for malaria.     

马占相思树干液流特征及其与环境因子的关系

运用Granier热消散式探针法对华南丘陵退化荒坡植被恢复先锋树种马占相思(Acaciamangium)树干液流密度进行长期连续观测,并对其周围环境因子如空气温度、空气相对湿度、土壤相对湿度、光合有效辐射和总辐射进行同步观测。通过分析发现马占相思边材厚度与胸径存在显著线性相关关系;马占相思树干液流密度最大值与边材面积具显著相关关系;马占相思树干东、南、西、北4个方位测得的液流密度具显著差异,且各方位相互之间均有显著相关关系;马占相思树干液流每天到达峰值与光合有效辐射和水蒸气压亏缺到达峰值存在一定的时滞,这两个时滞与树高无关,个体间时滞差异在湿季较小,干季较大;干湿季液流平均值和最大值具显著差异,湿季蒸腾水量大于相同时间内干季蒸腾水量;液流的变化与空气温度、空气相对湿度、光合有效辐射、总辐射、水蒸气压亏缺等环境因子的变化具显著相关关系,按相关程度排序为:光合有效辐射>总辐射>水蒸气压亏缺>空气相对湿度>空气温度。