Upside-down spiders build upside-down orb webs: web asymmetry,spider orientation and running speed in Cyclosa

Almost all spiders building vertical orb webs face downwards when sitting on the hubs of their webs, and their webs exhibit an up–down size asymmetry, with the lower part of the capture area being larger than the upper. However, spiders of the genus Cyclosa, which all build vertical orb webs, exhibit inter- and intraspecific variation in orientation. In particular, Cyclosa ginnaga and C. argenteoalba always face upwards, and C. octotuberculata always face downwards, whereas some C. confusa face upwards and others face downwards or even sideways. These spiders provide a unique opportunity to examine why most spiders face downwards and have asymmetrical webs. We found that upward-facing spiders had upside-down webs with larger upper parts, downward-facing spiders had normal webs with larger lower parts and sideways-facing spiders had more symmetrical webs. Downward-facing C. confusa spiders were larger than upward- and sideways-facing individuals. We also found that during prey attacks, downward-facing spiders ran significantly faster downwards than upwards, which was not the case in upward-facing spiders. These results suggest that the spider''s orientation at the hub and web asymmetry enhance its foraging efficiency by minimizing the time to reach prey trapped in the web.     

A bioreactor test system to mimic the biological and mechanical environment of oral soft tissues and to evaluate substitutes for connective tissue grafts

Gingival cells of the oral connective tissue are exposed to complex mechanical forces during mastication, speech, tooth movement and orthodontic treatments. Especially during wound healing following surgical procedures, internal and external forces may occur, creating pressure upon the newly formed tissue. This clinical situation has to be considered when developing biomaterials to augment soft tissue in the oral cavity. In order to pre‐evaluate a collagen sponge intended to serve as a substitute for autogenous connective tissue grafts (CTGs), a dynamic bioreactor system was developed. Pressure and shear forces can be applied in this bioreactor in addition to a constant medium perfusion to cell‐material constructs. Three‐dimensional volume changes and stiffness of the matrices were analyzed. In addition, cell responses such as cell vitality and extracellular matrix (ECM) production were investigated. The number of metabolic active cells constantly increased under fully dynamic culture conditions. The sponges remained elastic even after mechanical forces were applied for 14 days. Analysis of collagen type I and fibronectin revealed a statistically significant accumulation of these ECM molecules (P < 0.05–0.001) when compared to static cultures. An increased expression of tenascin‐c, indicating tissue remodeling processes, was observed under dynamic conditions only. The results indicate that the tested in vitro cell culture system was able to mimic both the biological and mechanical environments of the clinical situation in a healing wound. Biotechnol. Bioeng. 2010;107: 1029–1039. © 2010 Wiley Periodicals, Inc.     

Elastic properties of external cortical bone in the craniofacial skeleton of the rhesus monkey

Knowledge of elastic properties and of their variation in the cortical bone of the craniofacial skeleton is indispensable for creating accurate finite-element models to explore the biomechanics and adaptation of the skull in primates. In this study, we measured elastic properties of the external cortex of the rhesus monkey craniofacial skeleton, using an ultrasonic technique. Twenty-eight cylindrical cortical specimens were removed from each of six craniofacial skeletons of adult Macaca mulatta. Thickness, density, and a set of longitudinal and transverse ultrasonic velocities were measured on each specimen to allow calculation of the elastic properties in three dimensions, according to equations derived from Newton's second law and Hooke's law. The axes of maximum stiffness were determined by fitting longitudinal velocities measured along the perimeter of each cortical specimen to a sinusoidal function. Results showed significant differences in elastic properties between different functional areas of the rhesus cranium, and that many sites have a consistent orientation of maximum stiffness among specimens. Overall, the cortical bones of the rhesus monkey skull can be modeled as orthotropic in many regions, and as transversely isotropic in some regions, e.g., the supraorbital region. There are differences from human crania, suggesting that structural differences in skeletal form relate to differences in cortical material properties across species. These differences also suggest that we require more comparative data on elastic properties in primate craniofacial skeletons to explore effectively the functional significance of these differences, especially when these differences are elucidated through modeling approaches, such as finite-element modeling.     

Biomechanical adaptations for burrowing in the incisor enamel microstructure of Geomyidae and Heteromyidae (Rodentia: Geomyoidea)

The enamel microstructure of fossil and extant Geomyoidea (Geomyidae, Heteromyidae) lower incisors incorporates three‐ or two‐layered schmelzmusters with uniserial, transverse Hunter‐Schreger bands having parallel and perpendicular or exclusively perpendicular oriented interprismatic matrix. Phylogenetically, these schmelzmusters are regarded as moderately (enamel type 2) to highly derived (enamel type 3). Our analysis detected a zone of modified radial enamel close to the enamel–dentine junction. Modified radial enamel shows a strong phylogenetic signal within the clade Geomorpha as it is restricted to fossil and extant Geomyoidea and absent in Heliscomyidae, Florentiamyidae, and Eomyidae. This character dates back to at least the early Oligocene (early Arikareean, 29 Ma), where it occurs in entoptychine gophers. We contend that this specialized incisor enamel architecture developed as a biomechanical adaptation to regular burrowing activities including chisel‐tooth digging and a fiber‐rich diet and was probably present in the common ancestor of the clade. We regard the occurrence of modified radial enamel in lower incisors of scratch‐digging Geomyidae and Heteromyidae as the retention of a plesiomorphic character that is selectively neutral. The shared occurrence of modified radial enamel is a strong, genetically anchored argument for the close phylogenetic relationship of Geomyidae and Heteromyidae on the dental microstructure level.     

Influence of different mucosal resiliency and denture reline on stress distribution in peri-implant bone tissue during osseointegration. A three-dimensional finite element analysis

doi: 10.1111/j.1741‐2358.2011.00569.x Influence of different mucosal resiliency and denture reline on stress distribution in peri‐implant bone tissue during osseointegration. A three‐dimensional finite element analysis Objective: The aim of this study was to evaluate the influence of mucosal properties and relining material on the stress distribution in peri‐implant bone tissue during masticatory function with a conventional complete denture during the healing period through finite element analysis. Materials and Methods: Three‐dimensional models of a severely resorbed mandible with two recently placed implants in the anterior region were created and divided into the following situations: (i) conventional complete denture and (ii) relined denture with soft lining material. The mucosal tissue properties were divided into soft, resilient and hard. The models were exported to mechanical simulation software; two simulations were carried out with a load at the lower right canine (35 N) and the lower right first molar (50 N). Data were qualitatively evaluated using Maximum Principal Stress, in MPa, given by the software. Results: All models showed stress concentrations in the cortical bone corresponding to the cervical part of the implant. The mucosal properties influenced the stress in peri‐implant bone tissue showing a different performance according to the denture base material. The simulations with relined dentures showed lower values of stress concentration than conventional ones. Conclusions: It seems that the mucosal properties and denture reline have a high influence on the stress distribution in the peri‐implant bone during the healing period.     

Comparison of mandibular bone mineral density in osteoporotic, osteopenic and normal elderly edentulous subjects measured by the dual-energy X-ray absorptiometry technique

doi: 10.1111/j.1741‐2358.2012.00625.x Comparison of mandibular bone mineral density in osteoporotic, osteopenic and normal elderly edentulous subjects measured by the dual‐energy X‐ray absorptiometry technique Objective: The aim of this study was to compare the mandibular body bone mineral density according to bone mineral density status of spine and femur measured by dual‐energy X‐ray absorptiometry (DXA) technique in elderly edentulous individuals. Background: One of the factors that affect the survival rate of implants is bone mineral density (BMD) of the jaws. Materials and methods: Fifty edentulous elderly patients’ (27 women and 23 men) spine, femur and the mandibular body BMDs were measured using DXA technique. BMD scans of the AP lumbar spine (L2–L3) and femur were classified using World Health Organisation criteria for bone mass. Results: There was a statistically significant difference between the normal femur group’s–osteoporosis group’s mandibular body BMD (p = 0.001) and femoral osteopaenia group’s–osteoporosis group’s mandibular body BMD (p < 0.001). The femoral osteoporosis group’s mandibular body BMDs were lower than those of both the normal femoral and the femoral osteopaenia group subjects’. Conclusion: Classification of edentulous mandibles according to low and high bone mineral densities is a problem in implant dentistry. The results of this study demonstrated that femoral bone mineral density status may be used to provide preliminary information about the bone mineral density of the mandibular body region in elderly edentulous subjects.