Use of disease progress curves to study the effects of the biocontrol agent Sporidesmium sclerotivorum on lettuce drop

At the end of the spring 1987 growing season, the mycoparasite Sporidesmium sclerotivorum was applied at 0, 0.2, 2 or 20 kg ha^‐1 to lettuce plants infected with Sclerotinia minor. Disease incidence was monitored in the same plots for five subsequent crops (three fall and two spring crops) without additional application of either pathogen or mycoparasite. Logistic growth curves were fitted to the data to describe disease progression over time for each inoculum level within each of the five crops. Within each crop, increasing the quantity of mycoparasite inoculum resulted in positive horizontal displacement of the curve with respect to time. As quantities of inoculum of S. sclerotivorum increased, inflection points of the disease progress curves increased at a decreasing rate. Thus, additional mycoparasite inoculum resulted in ever‐smaller increases in inflection point, and after a certain threshold level of mycoparasite inoculum (< 0.2 kg ha^‐1), increases in inflection point did not result in meaningful increases in harvestable lettuce. Maximum rates of disease increase were not different among the treatments within each crop, but were different between crops. Maximum rates of disease increase averaged 3.4, 3.4, 2.1, 3.6 and 1.5% day^‐1 for the fall 1987, spring 1988, fall 1988, spring 1989, and fall 1989, respectively. At all inoculum levels, the fall epidemics began later after planting than the spring epidemics.     

Presence of double‐stranded RNAs and virus‐like particles in the entomopathogenic fungus Metarhizium anisopliae

Nucleic acids from 41 strains of Metarhizium anisopliae, obtained from different parts of the world were extracted and examined by electrophoresis. Strong bands of double‐stranded RNA (dsRNA) were detected in two isolates from Brazil, V215 and V291, which had, respectively, 13 and 9 distinct bands ranging in size from ca. 0.75 to 3.5 kb. Icosahedral virus‐like particles (VLPs) (ca. 33 nm in diameter) were observed by transmission electron microscopy in extracts of these isolates. The VLPs and dsRNA were both absent from a clone of the isolate V291 which had been subcultured successively on solid medium. Bioassays against the aphid Myzus persicae showed no detectable difference in virulence between the clone of V291 which contained dsRNA and the clone that did not.     

Antibiotic production by strains of Gliocladium virens and its relation to the biocontrol of cotton seedling diseases

Strains of the fungal antagonist Gliocladium virens were separated into two distinct groups on the basis of secondary metabolite production in vitro. Strains of the ‘P’ group produced the antibiotics gliovirin and heptelidic acid but not the antibiotic gliotoxin and its companion, dimethylgliotoxin. Strains of the ‘Q’ group produced gliotoxin and dimethylgliotoxin but not gliovirin or heptelidic acid. Strains from both groups produced the antibiotic viridin and phytotoxin viridiol. Gliovirin was very inhibitory to Pythium ultimum but had no activity against Rhizoctonia solani, and strains that produce it were more effective seed treatment biocontrol agents of disease incited by P. ultimum. Conversely, gliotoxin was more active against R. solani than against P. ultimum, and strains that produced it were more effective seed treatments for controlling disease incited by R. solani. These results indicate that the antibiotic profiles of strains should be considered when screening strains for biocontrol efficacy, and that it may be necessary to treat seeds with a combination of strains in order to broaden the disease control spectrum.     

Tissue distribution of antihypertensive dipeptide, Val-Tyr, after its single oral administration to spontaneously hypertensive rats.

The distribution of an antihypertensive dipeptide, Val-Tyr (VY), in the tissues of spontaneously hypertensive rats (SHR) was investigated in this study. A single oral administration of VY (10 mg/kg) to 18-week-old SHR resulted in a prolonged reduction of systolic blood pressure (SBP) up to 9 h (SBP0h 198.0+/-3.6 mmHg; SBP9h 154.6+/-3.5 mmHg). As a result of VY determination, a roughly 10-fold higher increment of plasma VY level was observed at 1 h than that at 0 h, whereas thereafter the level declined rapidly. In tissues, VY was widely accumulated in the kidney, lung, heart, mesenteric artery and abdominal aorta with the area under the curve over 9 h of more than 40 pmol h/g tissue; of these a higher VY level was observed in the kidney and lung. In addition, a mean resident time (MRT) for each tissue (>5 h except for liver) revealed that VY preferably accumulated in the tissues rather than in the plasma (MRT 3.8 h). Significant reductions of tissue angiotensin I-converting enzyme activity and angiotensin II level were found in the abdominal aorta as well as in the kidney, suggesting that these organs could be a target site associated with the antihypertensive action of VY.     

Search for substrate-based inhibitors fitting the S2' space of malarial aspartic protease plasmepsin II.

Plasmepsin (Plm) has been identified as an important target for the development of new antimalarial drugs, since its inhibition leads to the starvation of Plasmodium falciparum. A series of substrate-based dipeptide-type Plm II inhibitors containing the hydroxymethylcarbonyl isostere as a transition-state mimic were synthesized. The general design principle was provision of a conformationally restrained hydroxyl group (corresponding to the set residue at the P2' position in native substrates) and a bulky unit to fit the S2' pocket.     

First chemical synthesis of a scorpion alpha-toxin affecting sodium channels: the Aah I toxin of Androctonus australis hector.

Aah I is a 63-residue alpha-toxin isolated from the venom of the Buthidae scorpion Androctonus australis hector, which is considered to be the most dangerous species. We report here the first chemical synthesis of Aah I by the solid-phase method, using a Fmoc strategy. The synthetic toxin I (sAah I) was renatured in DMSO-Tris buffer, purified and subjected to thorough analysis and comparison with the natural toxin. The sAah I showed physico-chemical (CD spectrum, molecular mass, HPLC elution), biochemical (amino-acid composition, sequence), immunochemical and pharmacological properties similar to those of the natural toxin. The synthetic toxin was recognized by a conformation-dependent monoclonal anti-Aah I antibody, with an IC50 value close to that for the natural toxin. Following intracerebroventricular injection, the synthetic and the natural toxins were similarly lethal to mice. In voltage-clamp experiments, Na(v) 1.2 sodium channel inactivation was inhibited by the application of sAah I or of the natural toxin in a similar way. This work describes a simple protocol for the chemical synthesis of a scorpion alpha-toxin, making it possible to produce structural analogues in time.     

Effects of detergents on the secondary structures of prion protein peptides as studied by CD spectroscopy.

Pathogenic prion proteins (PrP(Sc)) are thought to be produced by alpha-helical to beta-sheet conformational changes in the normal cellular prion proteins (PrP(C)) located solely in the caveolar compartments. In order to inquire into the possible conformational changes due to the influences of hydrophobic environments within caveolae, the secondary structures of prion protein peptides were studied in various kinds of detergents by CD spectra. The peptides studied were PrP(129-154) and PrP(192-213); the former is supposed to assume beta-sheets and the latter alpha-helices, in PrP(Sc). The secondary structure analyses for the CD spectra revealed that in buffer solutions, both PrP(129-154) and PrP(192-213) mainly adopted random-coils (approximately 60%), followed by beta-sheets (30%-40%). PrP(129-154) showed no changes in the secondary structures even in various kinds of detergents such as octyl-beta-D-glucopyranoside (OG), octy-beta-D-maltopyranoside (OM). sodium dodecyl sulfate (SDS), Zwittergent 3-14 (ZW) and dodecylphosphocholine (DPC). In contrast, PrP(192-213) changed its secondary structure depending on the concentration of the detergents. SDS, ZW, OG and OM increased the alpha-helical content, and decreased the beta-sheet and random-coil contents. DPC also increased the alpha-helical content, but to a lesser extent than did SDS, ZW, OG or OM. These results indicate that PrP(129-154) has a propensity to adopt predominantly beta-sheets. On the other hand, PrP(192-213) has a rather fickle propensity and varies its secondary structure depending on the environmental conditions. It is considered that the hydrophobic environments provided by these detergents may mimic those provided by gangliosides in caveolae, the head groups of which consist of oligosaccharide chains containing sialic acids. It is concluded that PrP(C) could be converted into a nascent PrP(Sc) having a transient PrP(Sc) like structureunder the hydrophobic environments produced by gangliosides.     

Simplified methods for monitoring petroleum‐contaminated ground water and soil vapor

Portable meters and simplified gas Chromatographic (GC) techniques were investigated for monitoring volatile hydrocarbon (HC), CO₂, and O₂, concentrations in groundwater, exhaust gases, and soil vapor during in situ remediation using soil vapor extraction (SVE) and air sparging (AS). Results of groundwater samples analyzed in‐house using a headspace technique compared well to split samples analyzed by a certified analytical laboratory (r² = 0.94). SVE exhaust gas HC and CO₂ concentrations measured using a GT201 portable HC/O₂ meter and a RA‐411A meter (GasTech), respectively, were highly correlated with in‐house laboratory GC analyses (r² = 0.91). O₂ concentrations fell in a small range and meter analyses were not well correlated with laboratory analyses. Results of soil gas monitoring were not as well correlated as those for exhaust gases for HC, CO₂, or O₂, perhaps due to environmental conditions such as changes in relative humidity or the wider range of soil gas values. Overall, the meters were good indicators of vapor contamination, they greatly simplified estimates of total HC mass removal, and they allowed estimates of the biological contribution to contaminant removal during the remediation process.     

Cone penetrometer testing,hydropunch®, and borehole geophysics applications for environmental investigations

An effective groundwater monitoring system can be implemented by the combined utilization of cone penetrometer (CPT), HydroPunch^® sampling, and borehole geophysical methods. The combined techniques provide a cost‐effective method for the design of a groundwater monitoring system for geologists or hydrogeologists assessing a site. With the relatively high costs associated with determining groundwater quality for site assessments, coupled with regulatory agency compliance, these combined methods can provide an effective edge in an increasingly competitive environmental industry. CPT combined with HydroPunch sampling can delineate the horizontal and vertical extent and concentration of a contaminant plume, define the extent and thickness of a free product plume, define soil and aquifer characteristics, and aid in the proper selection of well location and screen placement. The use of borehole geophysics further enhances the interpretation provided from the CPT. The interpretation of borehole geophysics provides additional information about the deposition regime of the area of investigation and a more detailed investigation of the stratigraphy. The CPT and HydroPunch can be used in unconsolidated sediments, and HydroPunch sampling can be combined with a hollow‐stem auger system. Borehole geophysics can be run in almost any environment. CPT and borehole geophysics provide information on specific lithologic characteristics necessary to obtain a groundwater sample from vertically separated aquifers. The HydroPunch can obtain a discrete, chemically representative groundwater sample from the targeted aquifer. CPT and borehole geophysics can also be used to determine lithology and for correlation of equivalent stratas from one borehole or well to the next. Borehole geophysical interpretation also provides a means of determining not only the stratigraphy and lithology but also the aquifer parameters and the type of fluids in the aquifer. Hydrogeologic and geologic data obtained from using these three methods can be employed to maximize the cost‐effectiveness and design efficiency of a groundwater monitoring system. Proper location of wells and screened interval placements are determined by a coherent design process rather than by random chance. Two studies demonstrating the combined applications of CPT, HydroPunch, and borehole geophysics for the design and placement of groundwater monitoring wells are presented in the following discussion.