Alteration in cardiomyocyte mechanics by suboptimal levels of extracellular magnesium

The beneficial effects of magnesium supplementation in pathological situations is well known, but the myocardial response to a nominal decrease in the level of magnesium has received relatively little attention. Hypomagnesemia can occur as chronic or acute manifestation of physiological changes, pathological conditions, or pharmacological interventions. Experimental interest was focused on the mechanical changes in adult rat heart myocytes following variation in extracellular Mg²⁺. Isolated cells were exposed to different levels of extracellular Mg²⁺ and the amplitude and rate of contraction were measured as a function of change in cell length using a video-based edge-detection system. Investigations have revealed that variation in the level of Mg²⁺ within physiological limits leads to mechanical changes. A decrease in the level of extracellular Mg²⁺ was accompanied by a significant increase in contractile amplitude and decrease in the velocities of contraction and relaxation. The contractile amplitude measured as percentage shortening were 3.08 ± 0.19%, 4.62 ± 0.19% and 6.9 ± 0.40%, respectively, on exposure to 1.8, 0.8, and 0.48 mM Mg, and the corresponding velocities of contraction and relaxation normalized to amplitude were 0.54 ± 0.02, 0.40 ± 0.03, 0.31 ± 0.03 and 0.47 ± 0.02, 0.35 ± 0.02, 0.24 ± 0.02. The variations in contractile parameters associated with the change in the level of Mg were statistically significant (p < 0.01). Variation in the contractile properties associated with change in extracellular Mg²⁺ may be effected by alteration in Ca²⁺ transients.     

Optimization of Exopolysaccharide Overproduction by Lactobacillus confusus in Solid State Fermentation under High Salinity Stress

It is believed that high concentrations of sodium chloride (NaCl) suppress the biosynthesis of exopolysaccharide (EPS) in lactic acid bacteria (LAB). Nevertheless, overproduction of EPSs due to high salinity stress in solid state fermentation performed on an agar surface was demonstrated in this study using a response surface methodology via a central composite design (CCD). Under optimized conditions with NaCl 4.97% and sucrose 136.5 g/L at 40.79 h of incubation, the EPS yield was 259% (86.36 g/L of EPS), higher than the maximum yield produced with the modified MRS medium containing only 120 g/L of sucrose without NaCl (33.4 g/L of EPS). Biosynthesis of EPS by Lactobacillus confusus TISTR 1498 was independent of biomass production. Our results indicated that high salinity stress can enhance EPS production in solid state fermentation.     

A microstructurally informed model for the mechanical response of three-dimensional actin networks

We propose a class of microstructurally informed models for the linear elastic mechanical behaviour of cross-linked polymer networks such as the actin cytoskeleton. Salient features of the models include the possibility to represent anisotropic mechanical behaviour resulting from anisotropic filament distributions, and a power law scaling of the mechanical properties with the filament density. Mechanical models within the class are parameterized by seven different constants. We demonstrate a procedure for determining these constants using finite element models of three-dimensional actin networks. Actin filaments and cross-links were modelled as elastic rods, and the networks were constructed at physiological volume fractions and at the scale of an image voxel. We show the performance of the model in estimating the mechanical behaviour of the networks over a wide range of filament densities and degrees of anisotropy.     

An affine micro-sphere-based constitutive model,accounting for junctional sliding,can capture F-actin network mechanics

Actin filaments are a major component of the cytoskeleton and play a crucial role in cell mechanotransduction. F-actin networks can be reconstituted in vitro and their mechanical behaviour has been studied experimentally. Constitutive models that assume an idealised network structure, in combination with a non-affine network deformation, have been successful in capturing the elastic response of the network. In this study, an affine network deformation is assumed, in which we propose an alternative 3D finite strain constitutive model. The model makes use of a micro-sphere to calculate the strain energy density of the network, which is represented as a continuous distribution of filament orientations in space. By incorporating a simplified sliding mechanism at the filament-to-filament junctions, premature filament locking, inherent to affine network deformation, could be avoided. The model could successfully fit experimental shear data for a specific cross-linked F-actin network, demonstrating the potential of the novel model.     

Anaerobic degradation of solid material: importance of initiation centers for methanogenesis, mixing intensity, and 2D distributed model

Batch anaerobic codigestion of municipal household solid waste (MHSW) and digested manure in mesophilic conditions was carried out. The different waste-to-biomass ratios and intensity of mixing were studied theoretically and experimentally. The experiments showed that when organic loading was high, intensive mixing resulted in acidification and failure of the process, while low mixing intensity was crucial for successful digestion. However, when loading was low, mixing intensity had no significant effect on the process. We hypothesized that mixing was preventing establishment of methanogenic zones in the reactor space. The methanogenic zones are important to withstand inhibition due to development of acids formed during acidogenesis. The 2D distributed models of symmetrical cylinder reactor are presented based on the hypothesis of the necessity of a minimum size of methanogenic zones that can propagate and establish a good methanogenic environment. The model showed that at high organic loading rate spatial separation of the initial methanogenic centers from active acidogenic areas is the key factor for efficient conversion of solids to methane. The initial level of methanogenic biomass in the initiation centers is a critical factor for the survival of these centers. At low mixing, most of the initiation methanogenic centers survive and expand over the reactor volume. However, at vigorous mixing the initial methanogenic centers are reduced in size, averaged over the reactor volume, and finally dissipate. Using fluorescence in situ hybridization, large irregular cocci of microorganisms were observed in the case with minimal mixing, while in the case with high stirring mainly dead cells were found.     

Developing novel hCT derived cell-penetrating peptides with improved metabolic stability

Many promising therapeutics are currently awaiting their clinical application. Due to their low capability of cell membrane crossing, these compounds do not reach their site of action. One way to overcome this problem might be the fusion of these agents to cell-penetrating peptides (CPP), which are able to shuttle various cargoes across cellular membranes. One disadvantage in using CPP in drug delivery is their low metabolic stability. The aim of our work was to increase the proteolytic resistance of the CPP hCT(9-32), a truncated C-terminal fragment of human calcitonin. Thus, we synthesised six modified N-terminally carboxyfluorescein labelled hCT(9-32) derivatives by replacing positions 12 and/or 16 of hCT(9-32) with either N-methylphenylalanine or d-phenylalanine, respectively. By using confocal laser scanning microscopy we showed that the modifications did neither affect the peptide internalisation efficiency in HeLa nor HEK 293T cells. The metabolic stability of the peptides was investigated in human blood plasma and HEK 293T cell culture supernatant. To analyse the degradation patterns, we used RP-HPLC and MALDI-TOF mass spectrometry. However, we found for all of the new derivatives high metabolic stabilities. In blood plasma, the half-lives for five of the six peptides increased compared to unmodified hCT(9-32). The degradation patterns showed a distinct stabilisation in the N-terminal part of the modified peptides, in the C-terminal part, we found some cleavage to a minor extent. Furthermore, we studied the conformation of the peptides by CD spectroscopy and demonstrated that they possess no cell toxicity. Since our metabolically more stable compounds are still able to pass the cell membrane they provide powerful tools as drug delivery vectors.     

Fullerene‐based inhibitors of HIV‐1 protease

A series of Fmoc‐Phe(4‐aza‐C₆₀)‐OH of fullerene amino acid derived peptides have been prepared by solid phase peptide synthesis, in which the terminal amino acid, Phe(4‐aza‐C₆₀)‐OH, is derived from the dipolar addition to C₆₀ of the Fmoc‐Nα‐protected azido amino acids derived from phenylalanine: Fmoc‐Phe(4‐aza‐C₆₀)‐Lys₃‐OH ( 1 ), Fmoc‐Phe(4‐aza‐C₆₀)‐Pro‐Hyp‐Lys‐OH ( 2 ), and Fmoc‐Phe(4‐aza‐C₆₀)‐Hyp‐Hyp‐Lys‐OH ( 3 ). The inhibition constant of our fullerene aspartic protease PRIs utilized FRET‐based assay to evaluate the enzyme kinetics of HIV‐1 PR at various concentrations of inhibitors. Simulation of the docking of the peptide Fmoc‐Phe‐Pro‐Hyp‐Lys‐OH overestimated the inhibition, while the amino acid PRIs were well estimated. The experimental results show that C₆₀‐based amino acids are a good base structure in the design of protease inhibitors and that their inhibition can be improved upon by the addition of designer peptide sequences. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Limiting racemization and aspartimide formation in microwave-enhanced Fmoc solid phase peptide synthesis.

Microwave energy represents an efficient manner to accelerate both the deprotection and coupling reactions in 9-fluorenylmethyloxycarbonyl (Fmoc) solid phase peptide synthesis (SPPS). Typical SPPS side reactions including racemization and aspartimide formation can occur with microwave energy but can easily be controlled by routine use of optimized methods. Cysteine, histidine, and aspartic acid were susceptible to racemization during microwave SPPS of a model 20mer peptide containing all 20 natural amino acids. Lowering the microwave coupling temperature from 80 degrees C to 50 degrees C limited racemization of histidine and cysteine. Additionally, coupling of both histidine and cysteine can be performed conventionally while the rest of the peptide is synthesized using microwave without any deleterious effect, as racemization during the coupling reaction was limited to the activated ester state of the amino acids up to 80 degrees C. Use of the hindered amine, collidine, in the coupling reaction also minimized formation of D-cysteine. Aspartimide formation and subsequent racemization of aspartic acid was reduced by the addition of HOBt to the deprotection solution and/or use of piperazine in place of piperidine.     

Using linkage models to explore skull kinematic diversity and functional convergence in arthrodire placoderms

Biomechanical models offer a powerful set of tools for quantifying the diversity of function across fossil taxa. A computer‐based four‐bar linkage model previously developed to describe the potential feeding kinematics of Dunkleosteus terrelli is applied here to several other arthrodire placoderm taxa from different lineages. Arthrodire placoderms are a group of basal gnathostomes showing one of the earliest diversifications of jaw structures. The linkage model allows biomechanical variation to be compared across taxa, identify trends in skull morphology among arthrodires that potentially influence function and explore the role of linkage systems in the early evolution of jaw structures. The linkage model calculates various kinematic metrics including gape angle, effective mechanical advantage, and kinematic transmission coefficients. Results indicate that the arthrodire feeding system may be more diverse and complex than previously thought. A range of potential kinematic profiles among arthrodire taxa illustrate a diversity of feeding function comparable with modern teleost fishes. Previous estimates of bite force in Dunkleosteus are revised based on new morphological data. High levels of kinematic transmission among arthrodires suggest the potential for rapid gape expansion and possible suction feeding. Morphological comparisons indicate that there were several morphological solutions for obtaining these fast kinematics, which allowed different taxa to achieve similar kinematic profiles while varying other aspects of the feeding apparatus. Mapping of key morphological components of the linkage system on a general placoderm phylogeny illustrates the potential importance of four‐bar systems to the early evolution of jaw structures. J. Morphol. 271:990–1005, 2010. © 2010 Wiley‐Liss, Inc.     

Rapid detection of Escherichia coli in waters using fluorescent in situ hybridization,direct viable counting and solid phase cytometry

Aims: We developed an improved Fluorescent In Situ Hybridization FISH‐based method to detect viable Escherichia coli cells by solid phase cytometry (SPC), and results were compared to those obtained by the standard culture method. Methods and Results: The method includes a direct viable count (DVC) assay, multi‐probes labelled and unlabelled (helpers) to detect specifically viable E. coli cells and to enhance SPC cell counts. We demonstrate that helpers increase the fluorescence intensity of hybridized E. coli cells as detected by SPC and assess the high specificity of the DVC–FISH procedure on a large panel of cultured strains. Application to seawater, freshwater and wastewater samples showed a good correlation between SPC cells counts and standard plate counts. Conclusion: The high specificity of the procedure was demonstrated as well as its accuracy for detecting and counting viable E. coli cells in environmental samples. Significance and Impact of the Study: The developed approach may be used to monitor faecal contamination sources and to investigate the occurrence of viable E. coli in natural environments.