Two steps in the transition between the native and acid states of bovine α-lactalbumin detected by circular polarization of luminescence: Evidence for a premolten globule state?

A few studies indirectly support the existence of an intermediate in the transition of Ca(2+)-saturated bovine alpha-lactalbumin (alpha-LA) from the native (N) to the acidic (A) state, known as the molten globule state. However, direct experimental evidence for the appearance of this intermediate has not been obtained. The signal of circular polarization of luminescence (CPL) is sensitive to fine conformational transitions because of its susceptibility to changes in the environmental asymmetry of fluorescent chromophores in their excited electronic states. In the present study, CPL measurements were applied using the intrinsic tryptophan fluorescence of alpha-LA as well as the fluorescence of 8-anilino-1-naphthalenesulfonic acid (ANS) bound to alpha-LA. CPL of tryptophan and ANS was measured in the pH range of 2.5-6 in order to find direct experimental evidence for the proposed intermediate. CPL (characterized by the emission anisotropy factor, g(em)) depends on the asymmetry of the protein molecular structure in the environment of the tryptophan and the ANS chromophores in the excited electronic state. The pH dependence of both the gab, absorption anisotropy factor determined by CD, and the ANS steady state fluorescence, showed a single transition at pH 3-3.7 as already reported elsewhere. This transition was interpreted as being a result of a change of the alpha-LA tertiary structure, which resulted in a loss of asymmetry of the environment of both the tryptophan residues and the ANS hydrophobic binding sites. The pH dependence of the tryptophan and ANS g(em) showed an additional conformational transition at pH 4-5, which coincided with the pKa of Ca2+ dissociation (pKa 5), as predicted by Permyakov et al. (1981, Biochem Biophys Res Commun 100:191-197). The titration curve showed that there is a pH range between 3.7 and 4.1 in which alpha-LA exists in an intermediate state between the N- and A-state. We suggest that the intermediate is the premolten globule state characterized by a reduced Ca2+ binding to the alpha-LA, native-like tertiary structure, and reduced asymmetric fluctuation of the tertiary structure on the nanosecond time scale. This intermediate resembles the "critical activated state" theoretically deduced by Kuwajima et al. (1989, J Mol Biol 206:547-561). The present study demonstrates the power of CPL measurements for the investigation of folding/unfolding transitions in proteins.     

Inactivation and reactivation of light-triggered ATP hydrolysis on the chloroplast coupling factor

Decay of light-triggered ATP hydrolysis in the dark was diminished with a decrease in chloroplast concentration. The enhancing effect of NH₄Cl on ATP hydrolysis decreased with dark time. The decrease was much faster than that in ATP hydrolysis activity. The NH₄Cl effect increased with ATP preincubation time. Reactivation of ATP hydrolysis occurred with the progress of ATP hydrolysis. P_i enhanced the activation remarkably. These results suggest that ATP hydrolysis produces some energized state, which stimulates NH₄C1 effect and makes coupling factor active in the presence of P_i and that to keep coupling factor active, energy is not necessarily needed.     

Survival and transfer in the human gut of poorly mobilizable (pBR322) and of transferable plasmids from the same carrier E. coli

We examined the survival of a host Escherichia coli K-12 bacterium containing two transferable plasmids (pLM2, pSL222-4) and one poorly mobilizable plasmid (pBR322), and the transfer of these three plasmids to endogenous bacteria in the human intestinal tract. The survival of this plasmid-carrying host organism in four human volunteers was 3.5 to 6 days at recovery rates of 10^?1 to 10^?4. This finding was similar to our previous survival data on the same organism bearing a single plasmid. The K-12 strain appeared to be under a strong selective disadvantage in the human gut, since, even when bearing a tetracycline-resistant plasmid, its titer did not increase despite the administration of tetracycline. Studies of transferability showed that, while the transfer-depressed incFII plasmid pSL222-4 transferred at a frequency of 10^?1 in culture, its transfer in the human gut was much less frequent. The number of new recipients per donor cell ingested was about 10^?5, which included new recipients arising by multiplication. The recovery of pSL222-4 transcipients was enhanced by the administration of tetracycline on day 6. Neither the transfer-repressed, broad host range incP plasmid pLM2, nor the plasmid pBR322, could be detected in any endogenous host bacteria. Using the transfer and mobilization frequencies obtained in culture and the number of new recipients of pSL222-4 in the intestinal tract, we estimated that any in vivo mobilization of pBR322 to a new recipient could not occur at a frequency higher than 10^?12.     

Use of lambda phasmids for deletion mapping of non-selectable markers cloned in plasmids

A nonselectable gene carried on a poorly selectable recombinant plasmid has been physically mapped by deletion analysis. Our method involved cloning the plasmid into a coliphage lambda vector and treating the recombinant phage with a chelator. Virtually all particles surviving this treatment carried large deletions within the plasmid insert. Further deletion analysis was done by inserting a selectable lambda sequence into one such deletion derivative and repeating the chelator selection. Chelator selection was also used to isolate deletions constructed in vitro. The deleted phage are readily characterized by restriction mapping, and the gene in question scored after infection of a mutant host strain. These techniques have enabled us to physically assign the cyclopropane fatty acid synthase gene of Escherichia coli to 0.8 kb of a 16-kb segment after characterizing only a small number of isolates. This approach should be generally useful in the mapping of plasmids for which no convenient method exists for selecting or scoring the gene in question.     

Immune response to human influenza virus hemagglutinin expressed in Escherichia coli

Cloned DNA fragments coding for parts of strain WSN (H1N1) influenza virus hemagglutinin (HA) were fused to a bacterial leader DNA derived from the Escherichia coli trp operon. Fusion proteins produced consisted of 190 amino acids of trpLE' protein at the amino terminus, and HA amino acids, either 1-308, 1-396, or 1-548 (complete HA), at the carboxyl terminus. These proteins were expressed at high levels (10-20% of total protein) in E. coli starved for tryptophan. A CNBr fragment (HA1-211) was derived from HA-308. Each of the proteins was purified and used for immunizing mice and rabbits. The antibody produced was shown to bind to (i) the HA fusion proteins, (ii) detergent-treated viral HA, (iii) HA, on intact virions, and (iv) the HA on the surface of cells infected with influenza virus. This shows that the HA fusion proteins expressed in bacteria can elicit antibodies that recognize at least some determinants of the native viral HA, and probably could lead to development of an anti-influenza vaccine.     

Novel shuttle plasmid vehicles for Escherichia-Streptococcus transgeneric cloning

A novel plasmid vector that is able to replicate both in Escherichia coli and in Streptococcus sanguis is described. This 9.2-kb plasmid, designated pVA856, carries Cm^r, Tc^r and Em^r determinants that are expressed in E. coli. Only the Em^r determinant is expressed in S. sanguis. Both the Cm^r and the Tc^r of pVA856 may be insertionally inactivated. This plasmid affords several different cleavage-ligation strategies for cloning in E. coli followed by subsequent introduction of chimeras in to S. sanguis. In addition, we have modified a previously described E. coli-S. sanguis shuttle plasmid [pVA838; Macrina et al., Gene 19 (1982) 345–353], so that it is unable to replicate in S. sanguis. The utility of such a plasmid for cloning and selecting sequences enabling autonomous replication in S. sanguis is demonstrated.     

Characterization of the mutant lytic state in lambda expression systems

The two propagative phases of bacteriophage lambda, lysogeny and lysis, can be used in concert to enhance productivity of recombinant expression systems. Lambda vectors carrying mutations to prevent both cell lysis and lambda DNA packaging in the lytic state have been shown to yield 100% stability of the product gene in lysogeny and to produce up to 15% of total cell protein as product beta-galactosidase in a mutant lytic state.(14) Despite these mutations, partial lysis of the culture was observed following induction of the cells from a lysogenic phase into the lytic state. To understand better the phage-host cell interactions and to investigate the possible cause(s) of lysis in these highly productive expression systems, we have made a detailed study of the suppressor-free system JM105(NM1070). We have found high levels of product (15% of total cell protein as beta-glactosidase) to be due chiefly to a high-copy number of lambda DNA in the mutant lytic state. There is partial lysis of the culture even in this suppressor-free system caused by a low-level natural suppression of the amber mutation in gene S of NM1070, resulting in accumulation of lambda endolysin. We have also monitored changes in cell growth and morphology upon induction of the lysogen. There is a slight increase in cell number that follows a linear relationship with time and a 25-fold increase in cell volume during recombinat protein production in the mutant lytic state.     

Analysis of productivity in lysis-deficient lambda expression systems

The integrated state of lambda in the host chromosome in lysogeny can be combined with its extrachromosomal replication in the lytic state to achieve high cloned gene productivities. Our previous studies on lambda expression systems(21,22) have shown 100% segregational stability of the cloned gene in lysogeny and cloned gene product levels up to 15% of total cell protein in a mutant lytic state. However, the expression phase of systems based on Escherichia coli JM109 and JM105 showed partial lysis of the productive culture despite a mutation in the lysis gene S of the lambda vector resulting in extracellular release of the cloned gene product. In the current study, we have eliminated partial lysis in the expression phase of lambda systems and conducted a detailed comparative analysis of these systems in relation to maximization of cloned gene productivity. The elimination of partial cell lysis by using a nonpermissive strain Y1089 did not enhance product yields vs. earlier systems that exhibited partial lysis. The elimination of nonessential lambda protein production by construction of a new vector NP326 did not yield higher product yields presumably because of the small fraction of these proteins in the lytic state. Temperature induction of the lysogen Y1089(NM1070) resulted in higher product levels than direct infection of Y1089 by the phage vector at a high multiplicity. Using infection experiments, we found the promoter lacUV5 in the vector lambdaZEQS to yield threefold higher product levels than lac in NM1070, suggesting possible further enhancement of productivity with stronger promoters. The occurrence or absence of partial lysis in lambda systems could be used beneficially to achieve extracellular or intracellular product as desired. The large capacity of lambda vectors for insert DNA suggests potential applications in obtaining highly amplified levels of operons and multienzyme systems. (c) 1992 John Wiley & Sons, Inc.     

Cone penetrometer testing,hydropunch®, and borehole geophysics applications for environmental investigations

An effective groundwater monitoring system can be implemented by the combined utilization of cone penetrometer (CPT), HydroPunch^® sampling, and borehole geophysical methods. The combined techniques provide a cost‐effective method for the design of a groundwater monitoring system for geologists or hydrogeologists assessing a site. With the relatively high costs associated with determining groundwater quality for site assessments, coupled with regulatory agency compliance, these combined methods can provide an effective edge in an increasingly competitive environmental industry. CPT combined with HydroPunch sampling can delineate the horizontal and vertical extent and concentration of a contaminant plume, define the extent and thickness of a free product plume, define soil and aquifer characteristics, and aid in the proper selection of well location and screen placement. The use of borehole geophysics further enhances the interpretation provided from the CPT. The interpretation of borehole geophysics provides additional information about the deposition regime of the area of investigation and a more detailed investigation of the stratigraphy. The CPT and HydroPunch can be used in unconsolidated sediments, and HydroPunch sampling can be combined with a hollow‐stem auger system. Borehole geophysics can be run in almost any environment. CPT and borehole geophysics provide information on specific lithologic characteristics necessary to obtain a groundwater sample from vertically separated aquifers. The HydroPunch can obtain a discrete, chemically representative groundwater sample from the targeted aquifer. CPT and borehole geophysics can also be used to determine lithology and for correlation of equivalent stratas from one borehole or well to the next. Borehole geophysical interpretation also provides a means of determining not only the stratigraphy and lithology but also the aquifer parameters and the type of fluids in the aquifer. Hydrogeologic and geologic data obtained from using these three methods can be employed to maximize the cost‐effectiveness and design efficiency of a groundwater monitoring system. Proper location of wells and screened interval placements are determined by a coherent design process rather than by random chance. Two studies demonstrating the combined applications of CPT, HydroPunch, and borehole geophysics for the design and placement of groundwater monitoring wells are presented in the following discussion.