六种彩叶植物营养成分及有害元素含量分析

以六种彩叶植物紫叶李、红花木、红叶石楠、红枫、鸡爪槭和金叶女贞的叶片为材料,对其营养成分及有害元素含量进行了测定及分析。结果表明:蛋白质和可溶性糖含量以红花木为最高,维生素C含量以红枫为最高,β-胡萝卜素含量差异最大,紫叶李最高达15.99mg·kg-1。六种彩叶植物矿质营养元素种类齐全,其中红花木的营养元素总量最高。六种彩叶植物均含有18种氨基酸成分,必需氨基酸和总氨基酸含量各不相同,但必需氨基酸占总氨基酸的比例却较为一致,且都高于40%。六种彩叶植物叶片内均含有一定量的铅、镉、砷、汞等有害元素,但有害元素尤其是砷和汞的含量均低于允许量。     

The Mystery of Two Straight Lines in Bacterial Genome Statistics

In special coordinates (codon position-specific nucleotide frequencies), bacterial genomes form two straight lines in 9-dimensional space: one line for eubacterial genomes, another for archaeal genomes. All the 348 distinct bacterial genomes available in Genbank in April 2007, belong to these lines with high accuracy. The main challenge now is to explain the observed high accuracy. The new phenomenon of complementary symmetry for codon position-specific nucleotide frequencies is observed. The results of analysis of several codon usage models are presented. We demonstrate that the mean-field approximation, which is also known as context-free, or complete independence model, or Segre variety, can serve as a reasonable approximation to the real codon usage. The first two principal components of codon usage correlate strongly with genomic G+C content and the optimal growth temperature, respectively. The variation of codon usage along the third component is related to the curvature of the mean-field approximation. First three eigenvalues in codon usage PCA explain 59.1%, 7.8% and 4.7% of variation. The eubacterial and archaeal genomes codon usage is clearly distributed along two third order curves with genomic G+C content as a parameter.     

Sources of variability in spotted owl population growth rate: testing predictions using long-term mark–recapture data

For long-lived iteroparous vertebrates that annually produce few young, life history theory predicts that reproductive output (R) and juvenile survival should influence temporal variation in population growth rate (λ) more than adult survival does. We examined this general prediction using 15 years of mark–recapture data from a population of California spotted owls (Strix occidentalis occidentalis). We found that survival of individuals ≥1 year old (ϕ) exhibited much less temporal variability , where CV is coefficient of variation, than R and that R was strongly influenced by environmental stochasticity. Although λ was most sensitive ( ; log-transformed sensitivity) to ϕ and much less sensitive to either R or juvenile survival (survival rate of owls from fledging to 1 year old; ), we estimated that R contributed as much as ϕ to the observed annual variability in λ. The contribution of juvenile survival to variability in λ was proportional to its These results are consistent with the hypothesis that natural selection may have favored the evolution of longevity in spotted owls as a strategy to increase the probability of experiencing favorable years for reproduction. Our finding that annual weather patterns that most affected R (temperature and precipitation during incubation) and ϕ (conditions during winter related to the Southern Oscillation Index) were equally good at explaining temporal variability in λ supports the conclusion that R and ϕ were equally responsible for variability in λ. Although currently accepted conservation measures for spotted owl populations attempt to enhance survival, our results indicated that conservation measures that target R may be as successful, as long as actions do not reduce ϕ.     

Genetic dissection of grain yield in bread wheat. I. QTL analysis

Grain yield forms one of the key economic drivers behind a successful wheat (Triticum aestivum L.) cropping enterprise and is consequently a major target for wheat breeding programmes. However, due to its complex nature, little is known regarding the genetic control of grain yield. A doubled-haploid population, comprising 182 individuals, produced from a cross between two cultivars ‘Trident’ and ‘Molineux’, was used to construct a linkage map based largely on microsatellite molecular makers. ‘Trident’ represents a lineage of wheat varieties from southern Australia that has achieved consistently high relative grain yield across a range of environments. In comparison, ‘Molineux’ would be rated as a variety with low to moderate grain yield. The doubled-haploid population was grown from 2002 to 2005 in replicated field experiments at a range of environments across the southern Australian wheat belt. In total, grain yield data were recorded for the population at 18 site-year combinations. Grain yield components were also measured at three of these environments. Many loci previously found to be involved in the control of plant height, rust resistance and ear-emergence were found to influence grain yield and grain yield components in this population. An additional nine QTL, apparently unrelated to these traits, were also associated with grain yield. A QTL associated with grain yield on chromosome 1B, with no significant relationship with plant height, ear-emergence or rust resistance, was detected (LOD ≥2) at eight of the 18 environments. The mean yield, across 18 environments, of individuals carrying the ‘Molineux’ allele at the 1B locus was 4.8% higher than the mean grain yield of those lines carrying the ‘Trident’ allele at this locus. Another QTL identified on chromosome 4D was also associated with overall gain yield at six of the 18 environments. Of the nine grain yield QTL not shown to be associated with plant height, phenology or rust resistance, two were located near QTL associated with grain yield components. A third QTL, associated with grain yield components at each of the environments used for testing, was located on chromosome 7D. However, this QTL was not associated with grain yield at any of the environments. The implications of these findings on marker-assisted selection for grain yield are discussed.     

Domestication and crop physiology: roots of green-revolution wheat

BACKGROUND AND AIMS: Most plant scientists, in contrast to animal scientists, study only half the organism, namely above-ground stems, leaves, flowers and fruits, and neglect below-ground roots. Yet all acknowledge roots are important for anchorage, water and nutrient uptake, and presumably components of yield. This paper investigates the relationship between domestication, and the root systems of landraces, and the parents of early, mid- and late green-revolution bread wheat cultivars. It compares the root system of bread wheat and 'Veery'-type wheat containing the 1RS translocation from rye. METHODS: Wheat germplasm was grown in large pots in sand culture in replicated experiments. This allowed roots to be washed free to study root characters. KEY RESULTS: The three bread wheat parents of early green-revolution wheats have root biomass less than two-thirds the mean of some landrace wheats. Crossing early green-revolution wheat to an F(2) of 'Norin 10' and 'Brevor', further reduced root biomass in mid-generation semi-dwarf and dwarf wheats. Later-generation semi-dwarf wheats show genetic variation for root biomass, but some exhibit further reduction in root size. This is so for some California and UK wheats. The wheat-rye translocation in 'Kavkaz' for the short arm of chromosome 1 (1RS) increased root biomass and branching in cultivars that contained it. CONCLUSIONS: Root size of modern cultivars is small compared with that of landraces. Their root system may be too small for optimum uptake of water and nutrients and maximum grain yield. Optimum root size for grain yield has not been investigated in wheat or most crop plants. Use of 1RS and similar alien translocations may increase root biomass and grain yield significantly in irrigated and rain-fed conditions. Root characters may be integrated into components of yield analysis in wheat. Plant breeders may need to select directly for root characters.     

Using surface envelopes to constrain molecular modeling

Molecular density information (as measured by electron microscopic reconstructions or crystallographic density maps) can be a powerful source of information for molecular modeling. Molecular density constrains models by specifying where atoms should and should not be. Low-resolution density information can often be obtained relatively quickly, and there is a need for methods that use it effectively. We have previously described a method for scoring molecular models with surface envelopes to discriminate between plausible and implausible fits. We showed that we could successfully filter out models with the wrong shape based on this discrimination power. Ideally, however, surface information should be used during the modeling process to constrain the conformations that are sampled. In this paper, we describe an extension of our method for using shape information during computational modeling. We use the envelope scoring metric as part of an objective function in a global optimization that also optimizes distances and angles while avoiding collisions. We systematically tested surface representations of proteins (using all nonhydrogen heavy atoms) with different abundance of distance information and showed that the root mean square deviation (RMSD) of models built with envelope information is consistently improved, particularly in data sets with relatively small sets of short-range distances.     

2dx_merge: data management and merging for 2D crystal images

Electron crystallography of membrane proteins determines the structure of membrane-reconstituted and two-dimensionally (2D) crystallized membrane proteins by low-dose imaging with the transmission electron microscope, and computer image processing. We have previously presented the software system 2dx, for user-friendly image processing of 2D crystal images. Its central component 2dx_image is based on the MRC program suite, and allows the optionally fully automatic processing of one 2D crystal image. We present here the program 2dx_merge, which assists the user in the management of a 2D crystal image processing project, and facilitates the merging of the data from multiple images. The merged dataset can be used as a reference to re-process all images, which usually improves the resolution of the final reconstruction. Image processing and merging can be applied iteratively, until convergence is reached. 2dx is available under the GNU General Public License at http://2dx.org.     

Life cycle assessment of a multi-material car component

Background, Aims and Scope In recent years, the automotive industry has been experiencing an increasing concern with environmental requirements. A particular focus is being given to light-weighting of cars, to reducing fuel consumption and to the use of different recycling materials. Consequently, decisions on product design and development must involve economic and technological as well as environmental considerations. In adequate conditions, the LCA methodology enables one to assist an effective integration of the environmental considerations in the decision-making process [1]. In this paper, a multi-material car component which is part of the current automotive brake system, has been modified by its original manufacturer. Such a modification included the use of a new multi-material injection moulding process and the consumption of recyclable materials. The new and the current component were comparatively assessed throughout their life cycles in order to evaluate their respective environmental impacts and, thus, to verify if the new component offers a lower environmental load. The results described in this paper are part of the outcome of a broader research project involving industrial companies, university, technological centres and research institutes based in Portugal, Spain and Germany. Main Features The car component under focus has four subcomponents whose base materials consist of steel and plastic. The LCA methodology is used to evaluate two scenarios describing the new car component, on the one hand, and the reference scenario, which consists of the existing car component, on the other. The former results from the selection of new subcomponents materials, aiming to use a new production process together with a recycling strategy. Results and Discussion The inventory analysis shows a lower energy consumption in the alternative scenario (4.2 MJ) compared to the reference scenario (6.1 MJ). Most of that energy is still non-renewable, relating in particular to crude consumption in the car use phase and in the production phase (transports and plastics production). The life cycle inventory analysis indicates also that the alternative scenario has lower air emissions of CO₂, CO, NO_x, SO_x, NM VOC and PM10, as well as lower solid wastes and water emissions of oils and BOD5. Otherwise, the water emissions of undissolved substances and COD are higher for the alternative scenario. Most of the energy consumed and the air pollutants inventoried occur as a consequence of the use phase. Otherwise, for most of the life cycle water emissions inventoried and solid wastes, the production phase is the major contributor. The impact assessment, performed with the CML method, allows one to conclude that the alternative scenario exhibits lower results in all the impact categories. Both scenarios have similar environmental profiles, being: (i) the use phase, the major contributor for the abiotic depletion, global warming, photochemical oxidation, acidification and eutrophication; and (ii) the production phase, the main contributor for ozone depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity and terrestrial ecotoxicity. The sensitivity analysis, with respect to the fuel consumption reduction value, the impact assessment method and the final disposal scenario, performed in this study allows one to confirm, as a main conclusion, that the alternative scenario is environmentally preferable to the reference scenario. Conclusion The results obtained through the application of the LCA methodology enable one to conclude that the alternative component has a lower environmental load than the reference component. Recommendations and Perspectives Considering that the time required for the inventory data collection is a critical issue in LCA practise, the insights provided by this particular case study are likely to be useful to product developers in the car component manufacturing industry, particularly to brake system manufacturers supporting the environmental design within the sector.