Theoretical study of the electronic structure and conformation of polysilole and its derivatives

The electronic structures and conformations in the optimized geometries of polysilole and its derivatives are studied theoretically, using the one-dimensional tight-binding self-consistent field crystal orbital (SCF-CO) method. It has been found that the copolymer formed by alternating aromatic silole and quinoid thiophene has a relatively small bandgap value. We observe that polysilole may show an interesting thermochromic behavior, because the conformation of polysilole is considerably easier to change at lower temperature than that of polythiophene.     

Electronic structure of siloxene model compounds

The electronic structures of one-dimensional and two-dimensional siloxene (Si₆O₃H₆) model compounds have been examined theoretically, using the semiempirical tight-binding self-consistent field crystal orbital (SCF-CO) method. These compounds are formed by silicon-based chain and planar structures containing a regular array of oxygen atoms. Results show that the two-dimensional polysilane in which OH groups are substituted for H atoms possesses a relatively smaller direct gap than other siloxenes. It is assumed that the electronic structures of siloxenes are affected not only by the dimensionality of Si-Si -conjugational networks due to an array of oxygen atoms, but also by the diminishing of the electron population in the Si-Si bonding orbitals caused by oxygen atoms with large electronegativity.     

Catalytic and interfacial aspects of enzymatic polymer synthesis in reversed micellar systems

The enzyme horseradish peroxidase, when encapsulated in reversed micelles, is capable of catalyzing the synthesis of phenolic and aromatic amine polymers. The synthesis of polyethylphenol is specifically considered in this article and is found to be extremely feasible in the micellar system. Polymer chain growth can be controlled to some degree by manipulating the ability of the solvent to sustain chain solubility; this is effectively done by adjusting the surfactant concentration. This results in a degree of control of polymer molecular weight. The synthesized polymer drops out of solution and can be easily recovered. (c) 1993 John Wiley & Sons, Inc.     

利用酵母菌生产有机酸的研究进展

有机酸是含有一种或多种低分子量酸性基团(如羧基、磺酸基)的可生物合成的有机化合物,广泛应用于食品、农业、医药、生物基材料工业等领域。酵母菌具有生物安全、抗逆性强、底物谱广泛、方便遗传改造,以及大规模培养技术成熟等独特优点,因此利用酵母菌生产有机酸的研究日益受到国内外学者的关注。目前利用酵母生产有机酸还存在浓度低、副产物多,以及发酵效率低等缺陷。随着酵母菌代谢工程和合成生物学技术的发展,利用酵母菌生产有机酸取得了快速进展。本文总结了利用酵母合成11种有机酸的研究,包括内源和异源合成的大宗羧酸和高价值有机酸,并对该领域的未来研究方向进行了展望。     

Surface imprinted bio-nanocomposites for affinity separation of a cellular DNA repair protein

Apurinic/apyrimidinic endonuclease 1 (APE1) is a multifunctional DNA repair protein localized in different subcellular compartments. The mechanisms responsible for the highly regulated subcellular localization and “interactomes” of this protein are not fully understood but have been closely correlated to the posttranslational modifications in different biological context. In this work, we attempted to develop a bio-nanocomposite with antibody-like properties that could capture APE1 from cellular matrices to enable the comprehensive study of this protein. By fixing the template APE1 on the avidin-modified surface of silica-coated magnetic nanoparticles, we first added 3-aminophenylboronic acid to react with the glycosyl residues of avidin, followed by addition of 2-acrylamido-2-methylpropane sulfonic acid as the second functional monomer to perform the first step imprinting reaction. To further enhance the affinity and selectivity of the binding sites, we carried out the second step imprinting reaction with dopamine as the functional monomer. After the polymerization, we modified the nonimprinted sites with methoxypoly (ethylene glycol) amine (mPEG-NH₂). The resulting molecularly imprinted polymer-based bio-nanocomposite showed high affinity, specificity, and capacity for template APE1. It allowed for the extraction of APE1 from the cell lysates with high recovery and purity. Moreover, the bound protein could be effectively released from the bio-nanocomposite with high activity. The bio-nanocomposite offers a very useful tool for the separation of APE1 from various complex biological samples.     

N-Heterocyclic Carbene-Palladium Polymers Network: Recyclable Pre-catalyst for Effective Suzuki–Miyaura Coupling Reaction in Water

Rational design of high-efficiency N-heterocyclic carbene (NHC) palladium catalyst is of great importance to modern organic synthesis, especially in chemical and pharmaceutical industries. Herein, we fabricate a polymer network containing N-heterocyclic carbene palladium (PNNHC-Pd) catalytic active sites via an immobilization process. The N-heterocyclic carbene palladium can serve as a promising linkage of polymer network as well as an effective catalytic active site owing to its structural preference and strong σ-donating ability with palladium species. The results display that N-heterocyclic carbene palladium disperses homogeneously in polymer network, thus rendering PNNHC-Pd excellent catalytic activity, high stability and superior reusability in palladium-catalyzed Suzuki–Miyaura coupling reaction in aqueous medium. This work provides a new insight into the development of heterogenization of homogeneous catalysts based on polymer network.     

Embryonic and larval development of brown trout, Salmo trutta L.: exposure to trace metal mixtures in soft water

Freshly fertilized ova of brown trout, Salmo trutta L., were exposed to all possible mixtures of Al (6000 nmol 1¹), Cu (80 nmol 1⁻¹), Pb (50 nmol 1⁻¹) and Zn (300 nmol 1 ¹). In a separate experiment, newly hatched brown trout yolk-sac fry were exposed to Mn (1500 nmol 1⁻¹), Fe (2500 nmol 1 ¹), Ni (200 nmol 1⁻¹) or Cd (4 nmol 1 ¹), separately, and in mixtures with either Al or Cu. Both experiments were conducted in flowing, artificial softwater media nominally at pH 5.6 [Ca] 20 μmol 1 ¹ and 10° C.
Mortalities were high in fry subjected to treatments which contained both Al and Cu (31–72%), and to the Cu + Fe treatment (78%) compared with those from the other trace metal mixtures (0–22%). In all the treatments tested, fry exposed to trace metal mixtures containing Al and/or Cu had reduced whole body Ca, Na and K content, and seriously impaired skeletal calcification. Whole body Mg content was variable. In trace metal mixtures which contained Cu but not Al, the effects on fry survival and whole body mineral content were in general more deleterious than the corresponding mixtures but with Al present rather than Cu. The presence of Pb and/or Zn in mixtures with Al and/or Cu had a slight ameliorative effect in terms both of fry survival and whole body mineral content.     

Molecular modelling of the photoconduction mechanism by charged solitons intrans-polyacetylene: I

It is possible to rationalize the different steps involved in the photoconductivity observed intrans-polyacetylene (t-PA) in terms of a simple chemical model. The interchain electron transfer (IET) and the intrachain polaron capture by neutral solitons proposed by Orensteinat al. may be represented within a simple molecular orbital (MO) picture. An efficiency index for the IET is proposed in terms of the binding energy of the charged polarons and of the electronic chemical potential. The predictive power of the efficiency index is analyzed in the context of the global softness concept. An MO protocol is described to obtain estimates of the IET hopping probabilities.     

Maintenance of two genetic entities by habitat selection

Summary In the laboratory, the two species of copepodsLepeophtheirus thompsoni andLepeophtheirus europaensis, ectoparasites of flatfishes, can meet and mate on at least one host species. In the wild however, these two species are found isolated on their sympatric hosts. Habitat selection theoretically represents a powerful enough mechanism to explain the maintenance of genetic heterogeneity in the wide sense. In this paper, the host colonization process is studied for both parasite species. It is shown that each parasite can develop and reach adult age on each host species. However,L. thompsoni is highly selective; it almost totally refuses to colonize hosts other than its natural one.Lepeophtheirus europaensis, on the contrary, readily infests turbot and brill in single-host experiments, but strongly prefers the brill when it has a choice. It appears that these two genetic entities are sympatrically maintained due to strong habitat selection. Such a pattern could theoretically only occur in a soft-selection context (density dependence). This point is discussed with respect to the different patterns in host use found in the geographical distribution of these parasites.     

Theoretical Study of the TiO2 and MgO Surface Acidity and the Adsorption of Acids and Bases

We present ab-initio periodic Hartree–Fock calculations (crystal program) of small molecules on TiO₂ and MgO. The adsorption of the molecules may be molecular or dissociative. This depends on their acid and basic properties in the gas phase. For the molecular adsorption, the molecules are adsorbed as bases on Ti(+IV) sites, the adsorption energies correlate with the proton affinities. The dissociations on the surface correlate with the gas phase cleavages: thus, the dissociation of MeOH leads to a preferential basic cleavage (the fragment HO– is adsorbed on a Ti⁺⁴ ion and the fragment Me⁺ is adsorbed on a O²– ion of the oxide). The opposite result is obtained with MeSH. Another important factor is the adsorbate–adsorbate interaction: favorable cases are a sequence of H-bonds for the hydroxyl groups resulting from the water dissociation and the mode of adsorption for the ammonium ions. Lateral interactions also force the adsorbed CO₂ molecules to bend over the surface so that their mutual orientation resembles the geometry of the CO₂ dimer. With respect to water adsorption, MgO appears to be a basic oxide. As experimentally observed, NH₃ adsorbs preferentially on TiO₂ and CO₂ on MgO. However, this difference of reactivity should not be expressed in terms of acid vs. basic behaviour but in terms of hard and soft acidity. The MgO surface is a 'soft' acidic surface that reacts preferentially with the soft base, CO₂.