A life cycle comparison of disposal and beneficial use of coal combustion products in Florida

Background, Goal, and Scope

Currently, only 40%, or 44.5 million metric tons, of coal combustion products (CCPs) generated in the United States each year by electric utilities are diverted from disposal in landfills or surface impoundments and recycled. Despite promising economic and environmental savings, there has been scant attention devoted to assessing life cycle impacts of CCP disposal and beneficial use. The objective of this paper is to present a life cycle inventory considering two cases of CCP management, including the stages of coal mining and preparation, coal combustion, CCP disposal, and CCP beneficial use. Six beneficial uses were considered: concrete production, structural fills, soil amendments, road construction, blasting grit and roofing granules, and wallboard.

Methods

Primary data for raw material inputs and emissions of all stages considered were obtained from surveys and site visits of coal-burning utilities in Florida conducted in 2002, and secondary data were obtained from various published sources and from databases available in SimaPro 5.1 (PRé Consultants, Amersfoort, The Netherlands).

Results

Results revealed that 50 percent of all CCPs produced, or 108 kg per 1,000 kg of coal combusted, are diverted for application in a beneficial use; however, the relative amounts sold by each utility is dependent on the process operating parameters, air emission control devices, and resulting quality of CCP. Diversion of 50% of all CCPs to beneficial use applications yields a decrease in the total raw materials requirements (with the exception of gravel and iron) and most emissions to air, water, and land, as compared to 100% disposal.

Discussion

The greatest reduction of raw materials was attributed to replacing Portland cement with fly ash, using bottom ash as an aggregate in concrete production and road construction in place of natural materials, and substituting FGD gypsum for natural gypsum in wallboard. The use of fly ash as cementitious material in concrete also promised significant reductions in emissions, particularly the carbon dioxide that would be generated from Portland cement production. Beneficial uses of fly ash and gypsum showed reductions of emissions to water (particularly total dissolved solids) and emissions of metals to land, although these reductions were small compared to simply diverting 50% of all CCPs from landfills or surface impoundments.

Conclusions

This life cycle inventory (LCI) provides the foundation for assessing the impacts of CCP disposal and beneficial use. Beneficial use of CCPs is shown here to yield reductions in raw material requirements and various emissions to all environmental compartments, with potential tangible savings to human health and the environment.

Recommendations and Perspectives

Extension of this life cycle inventory to include impact assessment and sensitivity analysis will enable a determination of whether the savings in emissions reported here actually result in significant improvements in environmental and human health impacts.

     

Preliminary study of Lead (Pb) immobilization by meat and bone meal combustion residues (MBMCR) in soil: Assessment of Pb toxicity (phytotoxicity and genotoxicity) using the tobacco model (Nicotiana tabacum var. xanthi Dulieu)

Lead (Pb) is a major chemical pollutant in the environment. The present investigation evaluates the possible use of Meat and Bone Meal Combustion Residues (MBMCR), to sequester Pb from the soil compartment using the heterozygous tobacco model (Nicotiana tabacum var. xanthi Dulieu) characterized by the a1+ /a1 a2+ /a2 system. The toxic potential of Pb-contaminations (50, 100, 1,000, 2,000 and 10,000 mg Pb kg(-1)) as Pb(NO3) in standard soil was investigated in lab conditions according to three endpoints: (i) acute toxicity of plants (mortality, height and surface area parameters), (ii) Pb-accumulation in roots, stems and leaves, and (iii) genetic effects as the expression of reversion in the leaf of plants. Moreover, chemical investigations of Pb interactions with soil were realized to complete the toxicity evaluation. The results demonstrated that: (i) MBMCR were not acutely toxic or genotoxic to tobacco plants, (ii) Pb is acutely toxic to tobacco plants at 10,000 mg Pb kg(-1) of soil, (ii) but is not genotoxic, and (iii) Pb-bioaccumulation is significant in leaves, stems and roots (from 1,000, 2,000, and 50 mg Pb kg(-1) of soil, respectively). In contrast, in the presence of MBMCR, the toxic impacts of Pb were inhibited and Pb-accumulation in tobacco plants was reduced. In complement, chemical analyses highlighted the high capacity of the standard soil to immobilize Pb. The results suggest that even if Pb is bioavailable from soils to plants, complex mechanisms could occur in plants protecting them from the toxic impact of Pb.     

ZnAl2O4:Eu novel phosphor: SEM and mechanoluminescence characterization synthesized by solution combustion technique

Eu doped ZnAl₂O₄ phosphors were synthesized by the solution combustion technique using carbohydrazide as a fuel. Mechanoluminescence (ML) was excited impulsively by dropping a piston of 0.7 kg onto the phosphors. Two distinct peaks were observed in the ML glow curve of the γ‐ray irradiated ZnAl₂O₄:Eu phosphors. Dependence of ML on various parameters as impact velocity of the piston dropped on to it, mass of the sample, gamma ray doses given to the sample and ML spectra have been studied. ML emission spectrum showed the characteristic emission of Eu³⁺ ion in this system. ML is observed to be optimum for the sample having 0.2 mol% of Eu in the ZnAl₂O₄ phosphor. XRD result confirms formation of the phosphors. SEM characterization shows its surface morphology. This novel phosphor may be a potential candidate for dosimetric use due to its linear dose response. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐Performance Planar Perovskite Solar Cells Using Low Temperature,Solution–Combustion‐Based Nickel Oxide Hole Transporting Layer with Efficiency Exceeding 20%

NiO_x hole transporting layer has been extensively studied in optoelectronic devices. In this paper, the low temperature, solution–combustion‐based method is employed to prepare the NiO_x hole transporting layer. The resulting NiO_x thin films show better quality and preferable energy alignment with perovskite thin film compared to high temperature sol–gel‐processed NiO_x. With this, high‐performance perovskite solar cells are fabricated successfully with power conversion efficiency exceeding 20% using a modified two‐step prepared MA_1?yFA_yPbI_3?xCl_x perovskite. This efficiency value is among the highest values for NiO_x‐based devices. Various characterizations and analyses provide evidence of better film quality, enhanced charge transport and extraction, and suppressed charge recombination. Meanwhile, the device exhibits much better device stability compared to sol–gel‐processed NiO_x and poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)‐based devices.     

Temperature and efficiency of development during endogenous feeding in herring embryos and yolk-sac larvae

Oxygen uptakes, dry weights and energy contents of herring Clupea harengus were measured periodically from the time of egg fertilization to the end of the yolk-sac stage (without added food). Temperature of incubation (3·5–17° C) had little effect on efficiency of conversion of egg reserves to body material.     

Sedimentary records of carbonaceous particles from fossil fuel combustion

Carbonaceous particles produced by fossil fuel combustion can be found in considerable amounts in recent lake sediments. As these particles contain elemental carbon they are resistant to chemical decomposition and therefore both well preserved in sediments and possible to quantify. Sediment samples can be oxidized with H₂O₂ and digested with HF without the particles being destroyed. The pioneers in studying carbonaceous particles in lake sediments in relation to fossil fuel combustion were J. J. Griffin and E. D. Goldberg. They measured elemental carbon concentrations in Lake Michigan sediments, mainly by infrared assay. On the basis of these analyses, size distribution measurements and also morphological studies of single particles they concluded that the carbonaceous particle record reflected the onset of industrial activity and the increased intensities of fossil fuel combustion during the twentieth century. Similar results have been obtained from another lake in the USA by B. K. Kothari and M. Wahlen. We have counted spherical carbonaceous particles (larger than 5–10 µm), which are characteristic for oil and coal burning, in several lake sediments. In Swedish lakes, the annual accumulation of coarse carbonaceous spheres in varved sediments and the concentration stratigraphy in non-varved sediments, follow the same main pattern as statistical data for the Swedish coal and oil combustion over the last two centuries. Coarse carbonaceous spheres in two sediment profiles from Scottish lakes have also been counted. As for the USA and Sweden the sedimentary record was found to reflect the history of fossil fuel combustion.     

Photoluminescence properties of rare‐earth‐doped (Er3+,Yb3+) Y2O3 nanophosphors by a combustion synthesis method

In this work, we report the synthesis of Y₂O₃:Er³⁺, Y₂O₃:Yb³⁺ and Y₂O₃:Er³⁺,Yb³⁺ nanophosphors by the combustion synthesis method using urea as fuel. The doping agents were incorporated in the form of erbium nitrate and ytterbium nitrate. X‐Ray diffraction (XRD) patterns revealed that the synthesized particles have a body‐centered cubic structure with space group Ia‐3. The photoluminescence (PL) properties were investigated after UV and infrared irradiation at room temperature. A strong characteristic emission of Er³⁺ and Yb³⁺ ions was identified, and the influence of doping concentration on the PL properties was systematically studied. Energy transfer from Yb³⁺ to Er³⁺ ions was observed in Y₂O₃ nanophosphors. The obtained result may be useful in potential applications such as bioimaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence characteristics of Sr3B2O6:Eu2+ yellow phosphor

Sr₃B₂O₆:Eu²⁺ yellow phosphor was prepared by the combustion method. The crystalline structure, photoluminescence and thermoluminescence properties of Sr₃B₂O₆:Eu²⁺ were investigated extensively. The X‐ray diffraction result indicates that the Sr₃B₂O₆:Eu²⁺ phosphor exhibited a rhombohedral crystal structure. The emission spectra under a 435 nm excited wavelength showed an intense broad band peaking at 574 nm, which corresponds to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ion. There were two different sites of Sr replaced by Eu in host lattice. The concentration quenching process between Eu²⁺ ions is determined and the corresponding concentration quenching mechanism was verified as dipole‐quadrupole interaction. The glow curve under 3 Gy β‐ ray irradiation had the glow peak at 160°C and the average activation energy was defined as about 0.98 eV. Copyright © 2015 John Wiley & Sons, Ltd.     

Free Swell Characteristics of PCC Bottom Ash-Bentonite Mixtures with Curing for Use as Fill or Liner Material

Bottom ash is a coal combustion product (CCP) obtained from burning of pulverized coal to produce electricity. Most of the bottom ash from pulverized coal combustion (PCC) plants is disposed of in landfills and/or ash ponds. Over the last decade, there has been increased attention aimed toward the use of PCC bottom ash in geotechnical applications. The particle size distribution of pulverized coal combustion (PCC) bottom ash is similar to that of natural sand. Natural sand is commonly used in the construction industry in place of cohesive soils by adding admixtures to amend its properties. Several studies have been completed to determine the properties of bottom ash amended with bentonite. However, due to significant volume change characteristics of bentonite, soils or similar granular materials amended with it need to be evaluated for their swelling behavior. In addition, studies on bottom ash-bentonite mixtures have shown that strength and stiffness characteristics of these mixtures change significantly with curing. Therefore, in order to evaluate the use of bottom ash as a fill or landfill liner material, this study was initiated to investigate the effect of curing and moisture content on the swelling characteristics of pulverized coal combustion bottom ash amended with bentonite. Bottom ash specimens containing 15 and 20 percent bentonite and prepared at 14, 16 and 18 percent initial moisture content were tested in this investigation. Results presented show the swelling characteristics of bottom ash-bentonite mixtures with curing age up to 60 days.     

Profiling of urinary steroids by gas chromatography-mass spectrometry detection and confirmation of androstenedione administration using isotope ratio mass spectrometry

Androstenedione (4-androstene-3,17-dione) is banned by the World Anti-Doping Agency (WADA) as an endogenous steroid. The official method to confirm androstenedione abuse is isotope ratio mass spectrometry (IRMS). According to the guidance published by WADA, atypical steroid profiles are required to trigger IRMS analysis. However, in some situations, steroid profile parameters are not effective enough to suspect the misuse of endogenous steroids. The aim of this study was to investigate the atypical steroid profile induced by androstenedione administration and the detection of androstenedione doping using IRMS. Ingestion of androstenedione resulted in changes in urinary steroid profile, including increased concentrations of androsterone (An), etiocholanolone (Etio), 5α-androstane-3α,17β-diol (5α-diol), and 5β-androstane-3α,17β-diol (5β-diol) in all of the subjects. Nevertheless, the testosterone/epitestosterone (T/E) ratio was elevated only in some of the subjects. The rapid increases in the concentrations of An and Etio, as well as in T/E ratio for some subjects could provide indicators for initiating IRMS analysis only for a short time period, 2-22 h post-administration. However, IRMS could provide positive determinations for up to 55 h post-administration. This study demonstrated that, 5β-diol concentration or Etio/An ratio could be utilized as useful indicators for initiating IRMS analysis during 2-36 h post-administration. Lastly, Etio, with slower clearance, could be more effectively used than An for the confirmation of androstenedione doping using IRMS.