Real-time monitoring of biomass during Escherichia coli high-cell-density cultivations by in-line photon density wave spectroscopy

An efficient monitoring and control strategy is the basis for a reliable production process. Conventional optical density (OD) measurements involve superpositions of light absorption and scattering, and the results are only given in arbitrary units. In contrast, photon density wave (PDW) spectroscopy is a dilution-free method that allows independent quantification of both effects with defined units. For the first time, PDW spectroscopy was evaluated as a novel optical process analytical technology tool for real-time monitoring of biomass formation in Escherichia coli high-cell-density fed-batch cultivations. Inline PDW measurements were compared to a commercially available inline turbidity probe and with offline measurements of OD and cell dry weight (CDW). An accurate correlation of the reduced PDW scattering coefficient µ_s′ with CDW was observed in the range of 5–69 g L⁻¹ (R² = 0.98). The growth rates calculated based on µ_s′ were comparable to the rates determined with all reference methods. Furthermore, quantification of the reduced PDW scattering coefficient µ_s′ as a function of the absorption coefficient µ_a allowed direct detection of unintended process trends caused by overfeeding and subsequent acetate accumulation. Inline PDW spectroscopy can contribute to more robust bioprocess monitoring and consequently improved process performance.     

Optical colorimetric sensor strip for direct readout glucose measurement

A novel direct readout colorimetric optical glucose sensor strip was constructed based on a three-layer film, including a green-emitted CdTe/CdS quantum dots (QDs) layer as a stable color background, a red-fluorescent platinum-porphyrin oxygen-sensing layer and a glucose oxidase layer. The sensor achieved high resolution (up to 0.2 mmol L⁻¹) glucose determination with a detection range from 0 to 3.0 mmol L⁻¹. A “glucose ruler” which acts as a glucose standard colorimetric card was obtained. Glucose concentration could easily be directly readout using the “glucose ruler”, which made the glucose determination rapid, convenient and easy. The effects of pH, salinity and temperature were systematically investigated. The prepared sensor was finally applied for glucose sample analysis, compared with the “glucose ruler”, accurate results could be directly readout.     

Viscosity-mediated motion coupling between pairs of trichobothria on the leg of the spider <Emphasis Type="Italic">Cupiennius salei</Emphasis>

Arachnids and insects use long, thin hairs as motion sensors to detect signals contained in the movement of the surrounding air. These hairs often form groups with a small spacing of tens to hundreds of micrometers between them. For air oscillation frequencies of biological interest, the potential exists for viscosity-mediated coupling among hairs in a group affecting their response characteristics. Even a small diameter hair can, in principle, affect the flow field around it and the dynamics of the hairs in its neighborhood. The viscosity-mediated coupling between a pair of hairs is investigated here both experimentally and theoretically. The conditions for the existence of the coupling effect, and its magnitude as a function of relevant parameters, are determined. In the range of biologically relevant frequencies (30–300 Hz), viscous coupling between pairs of hairs is only very small in the case of the spider Cupiennius salei. Theoretical analysis points to the relatively large spacing between hairs (20 to 50 hair diameters) and the tuning of the hairs to the above-mentioned frequencies to explain the practical absence of coupling.     

Construction of a cyclic nucleotide-gated KcsA K+ channel

The ability of an ion channel to open in response to a defined stimulus is central to its function. In ligand-gated channels, pore opening is conferred through transduction of a conformational change in a gating domain to the helices of the pore. Here, we present the construction of a designed cyclic nucleotide-gated (CNG) channel, named KcsA-CNG, by addition of a prokaryotic cyclic nucleotide-binding domain to a KcsA-derived K+ channel. This channel is functional in lipid bilayers at physiological pH and has the combined properties of both of its parent-derived components. It conducts K+ and is blocked by the K+ channel inhibitors Na+ and agitoxin-2. Channel open times are increased by about two orders of magnitude compared to wild-type KcsA. The average number of open channels increases by approximately 50% upon addition of cAMP. Although the absolute open probabilities are somewhat variable from one channel to the next, the property of cyclic nucleotide sensitivity is very reproducible. An apparent Kd value of approximately 90 nM was estimated. The successful construction of a cyclic nucleotide-gated KcsA K+ channel suggests that it should be possible to produce channels that will respond to novel ligands.     

New insights into the nanometer-scaled cell-surface interspace by cell-sensor measurements

The culture of adherent cells on solid surfaces is an established in vitro method, and the adhesion process of a cell is considered as an important trigger for many cellular processes (e.g., polarity and tumor genesis). However, not all of the eliciting biochemical or biophysical reactions are yet understood. Interestingly, there are not much experimental data about the impact that the interspace between an adherent cell and the (solid) substrate has on the cell's behavior. This interspace is mainly built by the basolateral side of epithelial cells and the substrate. This paper gives some new results of non-invasive and non-optical measurements in the interspace. The measurements were made with silicon cell-sensor hybrids. Measurements of acidification, adhesion, and respiration are analyzed in view of the situation in the interspace. The results show that, in general, the release of an ion or molecule on the basolateral side can have much more influence on the biophysical situation than a release of an ion or molecule on the apical side. In particular, the apical acidification (i.e., amount of extruded protons) of, e.g., epithelial tumor cells is several orders of magnitude higher than the basolateral acidification. These experimental results are a simple consequence of the fact that the basolateral volume of the interspace is several orders of magnitudes smaller than the apical volume. These results have the following consequences for the cell adhesion:     

Optimal Transmission Radius for Flooding in Large Scale Sensor Networks

One of the principal characteristics of large scale wireless sensor networks is their distributed, multi-hop nature. Due to this characteristic, applications such as query propagation rely regularly on network-wide flooding for information dissemination. If the transmission radius is not set optimally, the flooded packet may be holding the transmission medium for longer periods than are necessary, reducing overall network throughput. We analyze the impact of the transmission radius on the average settling time—the time at which all nodes in the network finish transmitting the flooded packet. Our analytical model takes into account the behavior of the underlying contention-based MAC protocol, as well as edge effects and the size of the network. We show that for large wireless networks there exists an intermediate transmission radius which minimizes the settling time, corresponding to an optimal tradeoff between reception and contention times. We also explain how physical propagation models affect small wireless networks and why there is no intermediate optimal transmission radius observed in these cases. The mathematical analysis is supported and validated through extensive simulations.Marco Zuniga is currently a PhD student in the Department of Electrical Engineering at the University of Southern California. He received his Bachelors degree in Electrical Engineering from the Pontificia Universidad Catolica del Peru in 1998, and his Masters degree in Electrical Engineering from the University of Southern California in 2002. His interests are in the area of Wireless Sensor Networks in general, and more specifically in studying the interaction amongst different layers to improve the performance of these networks. He is a member of IEEE and the Phi Kappa Phi Honor society.Bhaskar Krishnamachari is an Assistant Professor in the Department of Electrical Engineering at the University of Southern California (USC), where he also holds a joint appointment in the Department of Computer Science. He received his Bachelors degree in Electrical Engineering with a four-year full-tuition scholarship from The Cooper Union for the Advancement of Science and Art in 1998. He received his Masters degree and his Ph.D. in Electrical Engineering from Cornell University in 1999 and 2002, under a four-year university graduate fellowship. Dr. Krishnamacharis previous research has included work on critical density thresholds in wireless networks, data centric routing in sensor networks, mobility management in cellular telephone systems, multicast flow control, heuristic global optimization, and constraint satisfaction. His current research is focused on the discovery of fundamental principles and the analysis and design of protocols for next generation wireless sensor networks. He is a member of IEEE, ACM and the Tau Beta Pi and Eta Kappa Nu Engineering Honor Societies     

Dynamic changes in expression of heme oxygenases in mouse heart and liver during hypoxia

Heme oxygenase cleaves heme to form biliverdin, carbon monoxide (CO), and iron, and consists of two structurally related isozymes, HO-1 and HO-2. HO-2 is also known as a potential oxygen sensor. Here we show that the relative CO content in arterial blood, which reflects the total amount of endogenous heme degradation, dynamically changes in mice during acclimatization to normobaric hypoxia (10% O2), with the two peaks at 1 day and 21 days of hypoxia. The expression levels of HO-1 and HO-2 proteins were decreased by 20% and 40%, respectively, in the mouse liver at 7 days of hypoxia, which returned to the basal levels at 14 days. On the other hand, HO-1 and HO-2 proteins were increased 2-fold and 1.3-fold, respectively, in the heart at 28 days of hypoxia. Thus, hypoxia induces or represses the expression of HO-1 and HO-2 in vivo, depending on cellular microenvironments.     

Long-term continuous monitoring of dissolved oxygen in cell culture medium for perfused bioreactors using optical oxygen sensors

For long-term growth of mammalian cells in perfused bioreactors, it is essential to monitor the concentration of dissolved oxygen (DO) present in the culture medium to ascertain the health of the cells. An optical oxygen sensor based on dynamic fluorescent quenching was developed for long-term continuous measurement of DO for NASA-designed rotating perfused bioreactors. Tris(4,7-diphenyl-1,10-phenanthroline) ruthenium(II) chloride is employed as the fluorescent dye indicator. A pulsed, blue LED was chosen as the excitation light source. The sensor can be sterilized using an autoclave. The sensors were tested in a perfused rotating bioreactor supporting a BHK-21 (baby hamster kidney) cell culture over one 28-day, one 43-day, and one 180-day cell runs. The sensors were initially calibrated in sterile phosphate-buffered saline (PBS) against a blood-gas analyzer (BGA), and then used continuously during the entire cell culture without recalibration. In the 180-day cell run, two oxygen sensors were employed; one interfaced at the outlet of the bioreactor and the other at the inlet of the bioreactor. The DO concentrations determined by both sensors were compared with those sampled and measured regularly with the BGA reference. The sensor outputs were found to correlate well with the BGA data throughout the experiment using a single calibration, where the DO of the culture medium varied between 25 and 60 mm Hg at the bioreactor outlet and 80-116 mm Hg at the bioreactor inlet. During all 180 days of culture, the precision and the bias were +/-5.1 mm Hg and -3.8 mm Hg at the bioreactor outlet, and +/- 19 mm Hg and -18 mm Hg at inlet. The sensor dynamic range is between 0 and 200 mm Hg and the response time is less than 1 minute. The resolution of the sensor is 0.1 mm Hg at 50 mm Hg, and 0.25 mm Hg at 130 mm Hg.     

基于Hartmann—Shack传感器的人眼波前像差重建技术

阐述了人眼波前像差的概念及其Zernike多项式表示方法,着重讨论了Hartmann—Shack传感器测量人眼像差的机理和人眼波前像差重建的方法,并对人眼波前像差重建系统进行了详细设计。该技术给人眼像差的校正以及角膜“个体化切削”的实现带来了新契机。     

Event-driven time-optimal control for a class of discontinuous bioreactors

Discontinuous bioreactors may be further optimized for processing inhibitory substrates using a convenient fed-batch mode. To do so the filling rate must be controlled in such a way as to push the reaction rate to its maximum value, by increasing the substrate concentration just up to the point where inhibition begins. However, an exact optimal controller requires measuring several variables (e.g., substrate concentrations in the feed and in the tank) and also good model knowledge (e.g., yield and kinetic parameters), requirements rarely satisfied in real applications. An environmentally important case, that exemplifies all these handicaps, is toxicant wastewater treatment. There the lack of online practical pollutant sensors may allow unforeseen high shock loads to be fed to the bioreactor, causing biomass inhibition that slows down the treatment process and, in extreme cases, even renders the biological process useless. In this work an event-driven time-optimal control (ED-TOC) is proposed to circumvent these limitations. We show how to detect a "there is inhibition" event by using some computable function of the available measurements. This event drives the ED-TOC to stop the filling. Later, by detecting the symmetric event, "there is no inhibition," the ED-TOC may restart the filling. A fill-react cycling then maintains the process safely hovering near its maximum reaction rate, allowing a robust and practically time-optimal operation of the bioreactor. An experimental study case of a wastewater treatment process application is presented. There the dissolved oxygen concentration was used to detect the events needed to drive the controller.