亲和素-生物素间接偶联的压电DNA传感器研究

采用3 3′-二巯基硫代丙酸的金电极自组装技术,用乙基3-（3-二甲氨基）碳二亚胺盐酸盐（EDC）和N-羟基磺基琥珀酰亚胺（NHS）偶联剂将亲和素固定于金电极上,联于生物素标记的探针,制备成压电DNA传感器的检测电极,和杂交液中的待检葡萄球菌肠毒素B的ssDNA进行杂交,通过频率信号检测DNA杂交的量,达到检测的目的.采用不同长度的基因片段进行了研究,制作的传感器一致性、特异性都较好;杂交后的电极,电极再生后,传感器可以重复使用.     

微生物燃料电池在毒性物质检测中的应用

微生物燃料电池(Microbial fuel cell,MFC)利用微生物整体作为催化剂催化底物将化学能直接转化为电能,是一种极具应用前景的生物电化学技术。微生物在阳极氧化还原有机物产生电子并传递给阳极,电子通过外电路传递至阴极后将电子释放给阴极中的氧化剂,从而产生电流。当有毒物质进入MFC,微生物活性降低,电子传递量变少,电流降低,而电流的产生与微生物活性呈线性关系,据此可检测样品的毒性。本文主要介绍了微生物燃料电池在毒性物质抗生素、重金属离子、有机污染物、酸等方面的研究,并分析了微生物燃料电池存在的问题及未来研究方向,以期不久的将来微生物燃料电池能付之使用。     

多频大幅脉冲传感系统监测3种食源性致病菌的生长趋势

【目的】探究智能电子舌伏安法结合特定的统计分析系统是否适用于示踪食品致病性细菌生长情况的快速监测。【方法】利用智能电子舌――多频大幅脉冲传感系统的伏安法,监测液体培养基中3种食源性致病菌的16个时段生长情况所致液体基质变化过程的综合信息;结合主成分分析法对获得的复杂综合信息数据进行统计学分析,按获得的主成分得分图分析检测样品。【结果】监测能力强的电极、频率段分别是：金黄色葡萄球菌的为钨电极的100 Hz、铂电极的1 Hz、银电极的10 Hz和钛电极的10 Hz频率段;大肠杆菌O157:H7的为金电极的100 Hz、铂电极的1 Hz、钛电极的1 Hz和钨电极的100 Hz频率段;枯草芽孢杆菌的为钯电极的1、10和100 Hz 3个频率段。【结论】本试验首次用多频大幅脉冲传感系统伏安法结合主成分分析法,能够有效的监测样品细菌的生长情况,有望成为一种具有多种优点的新型检测细菌生长情况的快速监测系统。     

尿酸酶－鲁米诺化学发光传感器

研制了依赖于鲁米诺化学发光反应和固定化尿酸酶柱的测定血清尿酸的生物传感器。其测定血清样品响应时间47s。测定每份样品需时1．5min,样品体积17μl。工作曲线的线性范围1~20mg／dl。批内不精密度3．22％～4.36％,批间6.18%～7．8%。测定值回收率为93％～109％。与医院常规酶试剂盘方法比较相关系数r=0.9909。固定化尿酸酶柱室温使用,4℃冰箱保存,连续使用5个半月测定样品2000次以上,仍保持原酶柱活力的94%。     

Control of the bifunctional O2-sensor kinase NreB of Staphylococcus carnosus by the nitrate sensor NreA: Switching from kinase to phosphatase state

The NreB–NreC two-component system of Staphylococcus carnosus for O₂ sensing cooperates with the accessory nitrate sensor NreA in the NreA–NreB–NreC system for coordinated sensing and regulation of nitrate respiration by O₂ and nitrate. ApoNreA (NreA in the absence of nitrate) interacts with NreB and inhibits NreB autophosphorylation (and activation). NreB contains the phosphatase motif DxxxQ. The present study shows that NreB on its own was inactive for the dephosphorylation of the phosphorylated response regulator NreC (NreC-P), but co-incubation with NreB and NreA stimulated NreC-P dephosphorylation. Either the presence of instead of apoNreA or mutation of the phosphatase motif (D160 or Q164) of NreB abrogated phosphatase activity of NreB. Phosphatase activity was observed for anoxic (active) NreB as well as oxic NreB, therefore the functional state of NreB is not relevant for phosphatase activity. Thus, NreB is a bifunctional sensor kinase with an integral cryptic phosphatase activity. Activation of phosphatase activity and dephosphorylation of NreC-P requires NreA as a cofactor. Accordingly, NreA and nitrate have major and dual roles in NreA–NreB–NreC regulation by (i) inhibiting NreB phosphorylation and (ii) triggering a kinase/phosphatase switch of NreB when present as apoNreA.     

A highly selective and sensitive boronic acid-based sensor for detecting Pd2+ ion under mild conditions

Herein, a boronic acid-based sensor was reported selectively to recognize Pd²⁺ ion. The fluorescence intensity increased 36-fold after sensor binding with 2.47 × 10⁻⁵ M of Pd²⁺ ion. It was carried out in the 99% aqueous solution for binding tests, indicating sensor having good water solubility. In addition, it is discernible that Pd²⁺ ion turned on the blue fluorescence of sensor under a UV–lamp (365 nm), while other ions (Ag⁺, Al³⁺, Ba²⁺, Ca²⁺, Cr²⁺, Cd²⁺, Co²⁺, Cs²⁺, Cu²⁺, Fe²⁺, Fe³⁺, K⁺, Li⁺, Mg²⁺, Mn²⁺, Na⁺, Ni²⁺ and Zn²⁺) did not show the similar change. Furthermore, sensor has a low limit of detection (38 nM) and high selectivity, which exhibits the potential for the development of Pd²⁺ recognition in practical environments.     

A novel method for assessing the 3-D orientation accuracy of inertial/magnetic sensors

A novel method for assessing the accuracy of inertial/magnetic sensors is presented. The method, referred to as the “residual matrix” method, is advantageous because it decouples the sensor's error with respect to Earth's gravity vector (attitude residual error: pitch and roll) from the sensor's error with respect to magnetic north (heading residual error), while remaining insensitive to singularity problems when the second Euler rotation is close to ±90°. As a demonstration, the accuracy of an inertial/magnetic sensor mounted to a participant's forearm was evaluated during a reaching task in a laboratory. Sensor orientation was measured internally (by the inertial/magnetic sensor) and externally using an optoelectronic measurement system with a marker cluster rigidly attached to the sensor's enclosure. Roll, pitch and heading residuals were calculated using the proposed novel method, as well as using a common orientation assessment method where the residuals are defined as the difference between the Euler angles measured by the inertial sensor and those measured by the optoelectronic system. Using the proposed residual matrix method, the roll and pitch residuals remained less than 1° and, as expected, no statistically significant difference between these two measures of attitude accuracy was found; the heading residuals were significantly larger than the attitude residuals but remained below 2°. Using the direct Euler angle comparison method, the residuals were in general larger due to singularity issues, and the expected significant difference between inertial/magnetic sensor attitude and heading accuracy was not present.     

A redox trap to augment the intein toolbox

The unregulated activity of inteins during expression and consequent side reactions during work‐up limits their widespread use in biotechnology and chemical biology. Therefore, we exploited a mechanism‐based approach to regulate intein autocatalysis for biotechnological application. The system, inspired by our previous structural studies, is based on reversible trapping of the intein's catalytic cysteine residue through a disulfide bond. Using standard mutagenesis, the disulfide trap can be implemented to impart redox control over different inteins and for a variety of applications both in vitro and in Escherichia coli. Thereby, we first enhanced the output for bioconjugation in intein‐mediated protein ligation, also referred to as expressed protein ligation, where precursor recovery and product yield were augmented fourfold to sixfold. Second, in bioseparation experiments, the redox trap boosted precursor recovery and product yield twofold. Finally, the disulfide‐trap intein technology stimulated development of a novel bacterial redox sensor. This sensor reliably identified hyperoxic E. coli harboring mutations that disrupt the reductive pathways for thioredoxin and glutathione, against a background of wild‐type cells. Biotechnol. Bioeng. 2013; 110: 1565–1573. © 2012 Wiley Periodicals, Inc.     

Xanthomonas campestris sensor kinase HpaS co-opts the orphan response regulator VemR to form a branched two-component system that regulates motility

Xanthomonas campestris pv. campestris (Xcc) controls virulence and plant infection mechanisms via the activity of the sensor kinase and response regulator pair HpaS/hypersensitive response and pathogenicity G (HrpG). Detailed analysis of the regulatory role of HpaS has suggested the occurrence of further regulators besides HrpG. Here we used in vitro and in vivo approaches to identify the orphan response regulator VemR as another partner of HpaS and to characterize relevant interactions between components of this signalling system. Bacterial two-hybrid and protein pull-down assays revealed that HpaS physically interacts with VemR. Phos-tag SDS-PAGE analysis showed that mutation in hpaS reduced markedly the phosphorylation of VemR in vivo. Mutation analysis reveals that HpaS and VemR contribute to the regulation of motility and this relationship appears to be epistatic. Additionally, we show that VemR control of Xcc motility is due in part to its ability to interact and bind to the flagellum rotor protein FliM. Taken together, the findings describe the unrecognized regulatory role of sensor kinase HpaS and orphan response regulator VemR in the control of motility in Xcc and contribute to the understanding of the complex regulatory mechanisms used by Xcc during plant infection.     

A colorimetric sensor array based on natural pigments for the discrimination of saccharides

A colorimetric sensor array based on natural pigments was developed to discriminate between various saccharides. Anthocyanins, pH‐sensitive natural pigments, were extracted from fruits and flowers and used as components of the sensor array. Variation in pH, due to the reaction between saccharides and boronic acids, caused obvious colour changes in the natural pigments. Only by observing the difference map with the naked eye could 11 common saccharides be divided into independent individuals. In conjunction with pattern recognition, the sensor array clearly differentiated between sugar and sugar alcohol with highly accuracy and allowed rapid quantification of different concentrations of maltitol and fructose. This sensor array for saccharides is expected to become a promising alternative tool for food monitoring. The link between anthocyanin and saccharide detection opened a new guiding direction for the application of anthocyanins in foods.