3D Si/C Fiber Paper Electrodes Fabricated Using a Combined Electrospray/Electrospinning Technique for Li‐Ion Batteries

Although the theoretical capacity of silicon is ten times higher than that of graphite, the overall electrode capacity of Si anodes is still low due to the low Si loading and heavy metal current collector. Here, a novel flexible 3D Si/C fiber paper electrode synthesized by simultaneously electrospraying nano‐Si‐PAN (polyacrylonitrile) clusters and electrospinning PAN fibers followed by carbonization is reported. The combined technology allows uniform incorporation of Si nanoparticles into a carbon textile matrix to form a nano‐Si/carbon composite fiber paper. The flexible 3D Si/C fiber paper electrode demonstrate a very high overall capacity of ≈1600 mAh g^‐1 with capacity loss less than 0.079% per cycle for 600 cycles and excellent rate capability. The exceptional performance is attributed to the unique architecture of the flexible 3D Si/C fiber paper, i.e., the resilient and conductive carbon fiber network matrix, carbon‐coated Si nanoparticle clusters, strong adhesion between carbon fibers and Si nanoparticle clusters, and uniform distribution of Si/C clusters in the carbon fiber frame. The scalable and facile synthesis method, good mechanical properties, and excellent electrochemical performance at a high Si loading make the flexible 3D Si/C fiber paper batteries extremely attractive for plug‐in electric vehicles, flexible electronics, space exploration, and military applications.     

A Novel Phase of Li15Si4 Synthesized under Pressure

Li₁₅Si₄, the only crystalline phase that forms during lithiation of the Si anode in lithium‐ion batteries, is found to undergo a structural transition to a new phase at 7 GPa. Despite the large unit cell of Li₁₅Si₄ (152 atoms in the unit cell), ab initio evolutionary metadynamics (using the USPEX code) successfully predicts the atomic structure of this new phase (β‐Li₁₅Si₄), which has an orthorhombic structure with an Fdd2 space group. In the new β‐Li₁₅Si₄ phase Si atoms are isolated by Li atoms analogous to the original cubic phase (α‐Li₁₅Si₄), whereas the atomic packing is more efficient owing to the higher Si? Li coordination number and shorter Si? Li, Li? Li bonds. β‐Li₁₅Si₄ has substantially larger elastic moduli compared with α‐Li₁₅Si₄, and has a good electrical conductivity. As a result, β‐Li₁₅Si₄ has superior resistance to deformation and fracture under stress. The theoretical volume expansion of Si would decrease 25% if it transforms to β‐Li₁₅Si₄, instead of α‐Li₁₅Si₄, during lithiation. Moreover, β‐Li₁₅Si₄ can be recovered back to ambient pressure, providing opportunities to further investigate its properties and potential applications.     

Resistance of Oryza sativa and Oryza glaberrima Genotypes to RBe24 Isolate of Rice Yellow Mottle Virus in Benin and Effects of Silicon on Host Response

Rice yellow mottle virus (RYMV) is the most harmful virus that affects irrigated and lowland rice in Africa. The RBe24 isolate of the virus is the most pathogenic strain in Benin. A total of 79 genotypes including susceptible IR64 (Oryza sativa) and the resistant TOG5681 (O. glaberrima) as checks were screened for their reactions to RBe24 isolate of RYMV and the effects of silicon on the response of host plants to the virus investigated. The experiment was a three-factor factorial consisting of genotypes, inoculation level (inoculated vs. non-inoculated), and silicon dose (0, 5, and 10 g/plant) applied as CaSiO₃ with two replications and carried out twice in the screen house. Significant differences were observed among the rice genotypes. Fifteen highly resistant and eight resistant genotypes were identified, and these were mainly O. glaberrima. Silicon application did not affect disease incidence and severity at 21 and 42 days after inoculation (DAI); it, however, significantly increased plant height of inoculated (3.6% for 5 g CaSiO₃/plant and 6.3% for 10 g CaSiO₃/plant) and non-inoculated (1.9% for 5 g CaSiO₃/plant and 4.9% for 10 g CaSiO₃/plant) plants at 42 DAI, with a reduction in the number of tillers (12.3% for both 5 and 10 g CaSiO₃/plant) and leaves (26.8% for 5 g CaSiO₃/plant and 28% for 10 g CaSiO₃/plant) under both inoculation treatments. Our results confirm O. glaberrima germplasm as an important source of resistance to RYMV, and critical in developing a comprehensive strategy for the control of RYMV in West Africa.     

A label-free optical sensor based on nanoporous gold arrays for the detection of oligodeoxynucleotides

Interest in using nanoporous materials for sensing applications has increased. The present study reports a method of preparing well-ordered nanoporous gold arrays using a porous silicon (PSi) template. Gold nanolayer could be electrodeposited on the surface of the PSi template at low electrolysis currents in low concentration of chloroauric acid (HAuCl₄) solution. Surface morphology characterizations and optical measurements revealed that a PSi-templated nanoporous gold (Au–PSi) array well replicated the nanoporous structure and retained the optical properties of PSi. Fourier transform reflectometric interference spectra showed that a characteristic blue-shifted effective optical thickness (EOT) was observed due to the low refractive index of the gold film. An optical DNA biosensor was then fabricated via the self-assembly of single-stranded DNA (ssDNA) with a specific sequence on the surface of Au–PSi. The attachment of ssDNA and its hybridization with target oligonucleotides (ODNs) persistently caused the blue shift of the EOT. Consequently, a relationship between the EOT shift and the ODN concentration was established. The mechanism of the optical response caused by DNA hybridization on the Au–PSi surface was qualitatively explained by the electromagnetic theory and electrochemical impedance spectroscopy (EIS). The lowest detection limit for target ODNs was estimated at around 10⁻¹⁴ mol L⁻¹, when the baseline noise, a variation in the value of EOT is around 5 nm. The fabricated Au–PSi based optical biosensor has potential use in the discovery of new ODN drugs because it will be able to detect the binding event between ODNs and the target DNA.     

On the Effect of the Amorphous Silicon Microstructure on the Grain Size of Solid Phase Crystallized Polycrystalline Silicon

In this paper the effect of the microstructure of remote plasma‐deposited amorphous silicon films on the grain size development in polycrystalline silicon upon solid‐phase crystallization is reported. The hydrogenated amorphous silicon films are deposited at different microstructure parameter values R* (which represents the distribution of SiH_x bonds in amorphous silicon), at constant hydrogen content. Amorphous silicon films undergo a phase transformation during solid‐phase crystallization and the process results in fully (poly‐)crystallized films. An increase in amorphous film structural disorder (i.e., an increase in R*), leads to the development of larger grain sizes (in the range of 700–1100 nm). When the microstructure parameter is reduced, the grain size ranges between 100 and 450 nm. These results point to the microstructure parameter having a key role in controlling the grain size of the polycrystalline silicon films and thus the performance of polycrystalline silicon solar cells.     

Recording Large-scale Neuronal Ensembles with Silicon Probes in the Anesthetized Rat

Large scale electrophysiological recordings from neuronal ensembles offer the opportunity to investigate how the brain orchestrates the wide variety of behaviors from the spiking activity of its neurons. One of the most effective methods to monitor spiking activity from a large number of neurons in multiple local neuronal circuits simultaneously is by using silicon electrode arrays^1-3.Action potentials produce large transmembrane voltage changes in the vicinity of cell somata. These output signals can be measured by placing a conductor in close proximity of a neuron. If there are many active (spiking) neurons in the vicinity of the tip, the electrode records combined signal from all of them, where contribution of a single neuron is weighted by its ''electrical distance''. Silicon probes are ideal recording electrodes to monitor multiple neurons because of a large number of recording sites (+64) and a small volume. Furthermore, multiple sites can be arranged over a distance of millimeters, thus allowing for the simultaneous recordings of neuronal activity in the various cortical layers or in multiple cortical columns (Fig. 1). Importantly, the geometrically precise distribution of the recording sites also allows for the determination of the spatial relationship of the isolated single neurons⁴. Here, we describe an acute, large-scale neuronal recording from the left and right forelimb somatosensory cortex simultaneously in an anesthetized rat with silicon probes (Fig. 2).     

Locally Addressable Electrochemical Patterning Technique (LAEPT) applied to poly(L-lysine)-graft-poly(ethylene glycol) adlayers on titanium and silicon oxide surfaces

The protein-resistant polycationic graft polymer, poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), was uniformly adsorbed onto a homogenous titanium surface and subsequently subjected to a direct current (dc) voltage. Under the influence of an ascending cathodic and anodic potential, there was a steady and gradual loss of PLL-g-PEG from the conductive titanium surface while no desorption was observed on the insulating silicon oxide substrates. We have implemented this difference in the electrochemical response of PLL-g-PEG on conductive titanium and insulating silicon oxide regions as a biosensing platform for the controlled surface functionalization of the titanium areas while maintaining a protein-resistant background on the silicon oxide regions. A silicon-based substrate was micropatterned into alternating stripes of conductive titanium and insulating silicon oxide with subsequent PLL-g-PEG adsorption onto its surfaces. The surface modified substrate was then subjected to +1800 mV (referenced to the silver electrode). It was observed that the potentiostatic action removed the PLL-g-PEG from the titanium stripes without inducing any polyelectrolyte loss from the silicon oxide regions. Time-of-flight secondary ions mass spectroscopy and fluorescence microscopy qualitatively confirmed the PLL-g-PEG retention on the silicon oxide stripes and its absence on the titanium region. This method, known as "Locally Addressable Electrochemical Patterning Technique" (LAEPT), offers great prospects for biomedical and biosensing applications. In an attempt to elucidate the desorption mechanism of PLL-g-PEG in the presence of an electric field on titanium surface, we have conducted electrochemical impedance spectroscopy experiments on bare titanium substrates. The results showed that electrochemical transformations occurred within the titanium oxide layer; its impedance and polarization resistance were found to decrease steadily upon both cathodic and anodic polarization resulting in the polyelectrolyte desorption from the titanium surface.     

Transformation of recalcitrant turfgrass cultivars through improvement of tissue culture and selection regime

Tissue culture techniques, medium composition, pH value and targeted tissues, agroinfection and co-culture conditions, selection process were optimized for efficient turfgrass transformation. A highly regenerable callus lines were produced in callus induction medium modified from N6 basal medium. Six-week-old calluses were cultured on Pre-regeneration medium I for 4 days and then subjected to Agrobacterium tumefaciens. After co-cultivation at 20±1 °C in a 16 h light/8 h darkness for 3 days, the calluses were cultured on non-selective Pre-regeneration medium II supplemented with 400 mg l⁻¹ l-cysteine for 7 days. Plantlets were regenerated on the Regeneration medium without selection pressure. A selection pressure was given to the regenerated plantlets when they were rooted on the Plantlet rooting medium. Roots appeared within 8–12 days in putative transformed plantlets. Resistant plants obtained were phenotypically normal and fully fertile. Chemical and molecular analyses confirmed that foreign genes were successfully introduced into the genome of perennial ryegrass or tall fescue. The transformation efficiency can attain 23.3% in perennial ryegrass.     

Elevated serum silicon levels in women with silicone gel breast implants

The metatolic fate of silicone gel leaked from an intact or ruptured prosthesis is unknown. In this study, serum was blindly assayed by inductively coupled plasma atomic emission spectroscopy (ICP-AES) for elemental silicon in 72 women with silicone gel breast implants and 55 control women (mean age 48 yr, both groups). Blood was drawn and processed using silicon-free materials. The mean silicon level in controls was 0.13±0.07 mg/L (range 0.06–0.35 mg/L), whereas in implant patients, the mean was significantly higher at 0.28±0.22 mg/L (range 0.06–0.87 mg/L) (P<0.01, Student'st-test with correction for unequal variances). Using the mean of the control group +2 SD as a cutoff for normal range (0.27 mg/L), 25/72 (34.7%) implant patients exceeded this value, compared with 2/55 (3.6%) controls. There was no significant correlation between past rupture of one or both implants, current rupture at the time of the blood draw, or the number of years with implants and silicon levels. The results suggest that serum silicon levels are elevated in many women with silicone gel breast implants. The chemical species involved and kinetics of this elevation remain to be determined.